TELTONIKA TSW030 8 Port Ethernet Switch User Guide
- June 1, 2024
- teltonika
Table of Contents
TELTONIKA TSW030 8 Port Ethernet Switch
HARDWARE
-
FRONT VIEW
-
BACK VIEW
-
RJ45 LED MEANING
-
POWER SOCKET PINOUT
FEATURES
ETHERNET
- Ethernet 8 x ETH ports, 10/100 Mbps, supports auto MDI/MDIX crossover
- IEEE 802.3 series standards 802.3i, 802.3u, 802.3ab, 802.3x, 802.3az
PERFORMANCE SPECIFICATIONS
- Bandwidth (Non-blocking) 20 Gbps
- Packer buffer 128 KB
- MAC address table size 2K entries
- Jumbo frame support 9216 bytes
POWER
- Connector 2-pin industrial DC power socket
- Input voltage range 7 – 57 VDC, overvoltage protection: 60Vmax, reverse polarity protection: 80Vmax, surge protection: min 64.4V/max 71.2V breakdown voltage, 93.6V maximum reverse voltage @4.3A maximum reverse surge current, 1- Vin, 2-PGND
- Power consumption Idle: 0.5 W / Max: 1.5 W
PHYSICAL INTERFACES
- Ethernet 8 x RJ45 ports, 10/100 Mbps
- Status LEDs 1 x Power LED, 16 x ETH status LEDs
- Power 1 x 2-pin industrial DC power socket
- Other 1 x Grounding screw
PHYSICAL SPECIFICATION
- Casing material Anodized aluminum housing and panels
- Dimensions (W x H x D) 113.1 x 41.2 x 74.6 mm
- Weight 256 g
- Mounting options Integrated DIN rail bracket, wall mount, flat surface (additional kit needed)
OPERATING ENVIRONMENT
- Operating temperature -40 °C to 75 °C
- Operating humidity 10% to 90% non-condensing
- Ingress Protection Rating IP30
REGULATORY & TYPE APPROVALS
- Regulatory CE, UKCA, EAC, UCRF, RCM, FCC, IC, CB
EMC EMISSIONS & IMMUNITY
- EMI IMMUNITY EN 55032:2015+A11:2020; EN 55035:2017+A11:2020; EN IEC 61000-3-2:2019+A1:2021; EN 61000-3 3:2013+A1:2019+A2:2021;
- ESD EN 61000-4-2:2009
- Radiated Immunity EN IEC 61000-4-3:2020
- EFT EN 61000-4-4:2012
- Surge Immunity (AC Mains Power Port) EN 61000-4-5:2014 + A1:2017
- CS EN 61000-4-6:2014
- DIP EN IEC 61000-4-11:2020
SAFETY
- Standards IEC 62368-1:2018
STANDARD PACKAGE*
-
TSW030
-
QSG (Quick Start Guide)
-
Packaging box
-
Standard package contents may differ based on standard order codes.
CLASSIFICATION CODES
HS Code : 851762
HTS : 8517.62.00
For more information on all available packaging options – please contact us directly.
AVAILABLE VERSIONS
HARDWARE VERSION| SUPPORTED FREQUENCIES| STANDARD ORDER CODE / PACKAGE
CONTAINS
---|---|---
TSW030 **| N/A| TSW030000000 / Standard package
TSW030 SPATIAL MEASUREMENTS
MAIN MEASUREMENTS
W x H x D dimensions for TSW030:
- *Device housing:** 113.1 x 41.2 x 74.6 mm
- Box: 118.5 x 45.7 x 79.5 mm
*Housing measurements are presented without screws; for measurements of other device elements look to the sections below.
FRONT VIEW
The figure below depicts the measurements of TSW030 and its components as seen from front view:
REAR VIEW
The figure below depicts the measurements of TSW030 and its components as seen from the rear view:
LEFT VIEW
The figure below depicts the measurements of TSW030 and its components as seen from the left panel side:
RIGHT VIEW
The figure below depicts the measurements of TSW030 and its components as seen from the right panel side:
MOUNTING SPACE REQUIREMENTS
The figure below depicts an approximation of the device’s dimensions when cables are attached:
Copyright © 2024, TELTONIKA NETWORKS. Specifications and information given in this document are subject to change by TELTONIKA NETWORKS without prior notice.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>