hiboy S2 PRO Electric Scooter User Manual
- June 14, 2024
- HIBOY
Table of Contents
S2/S2 PRO Quick Start
Electric Scooter
1. Unfold the stem and push it until you hear a click. Then unfold the kickstand to support the scooter.
2. Connect the power cable in the correct way, slide the handlebar onto the stem.
3. Use the Allen wrench to install 6 screws, make sure it’s tightened.
4. Ensure your scooter powers on and off.
Power Button
When the scooter is off, press the button to turn on the scooter;
When the scooter is on, press and hold for 3 seconds to turn off the scooter.
Battery Indicator
The power level is indicated by five power lights on the display.
Light
When the scooter is on, press the button to turn on or off all the lights (the
front light, side LED lights and rear light).
Mode
Press twice to switch the speed mode, Red S indicates Sport mode (max speed 19
mph), and Green S indicates Drive mode (max speed 13 mph)
Cruise Control
Quick press the power button 3 times to turn on (you will hear “Bi Bi”) or
turn off (you will hear “Bi”) the cruise control function.
For more functions, please visit Hiboy App, thanks.
Download “Hiboy S2” from “App Store”(iPhone) or “Google Play” (Android).
Notice
If the scooter is expected to be left idle for more than 30 days, please fully
charge the battery and place it in a dry and cool place. Keep in mind to
recharge it every 60 days to protect the battery from potential damage which
is beyond limited warranty.
Please always keep the original box for any future possible after-sales shipment, otherwise the extra shipping cost will be undertaken by consumers if an oversize box is used for after-sales shipment.
Any question, please contact: [email protected]
References
- Electric Scooters & Electric Bike | Personal Electric Vehicles | Hiboy
- Electric Scooters & Electric Bike | Personal Electric Vehicles | Hiboy