Brook PS3 Wingman NS Lite Converter User Manual

Brook PS3 Wingman NS Lite Converter

OVERVIEW

CONNECTION

LED Display

Switching Modes

• Switch to Switch mode: “+” & “- ” & “Long-press △”
• Switch to X-Input mode: “+” & “- ” & “Long-press X

Connecting to the Device

step.1
Insert Wingman NS Lite into the Switch console USB port. The slow blinking of the Blue LED indicates that the connection to the console is successful.

s tep.2

• Wired Connection: Connect the Xbox 360 / Xbox One/ PS3 / PS4 / PS5 / Switch Pro wired controller or gamepad to Wingman NS Lite through the USB port.
• Using an X360 wireless controller: Simply connect the wireless X360 wireless receiver to the Wingman NS Lite through the USB port
• Using Xbox One wireless controller / Xbox One Elite Series 2 controller: Connect the Xbox One wireless controller (Bluetooth model) or the Xbox One Elite Series 2 to the Wingman NS Lite and the controller will be ready for use. When connecting, hold the LED buttons at the two sides of the Wingman NS Lite for 1 second to enter wireless connection mode. Then press the Pair button on the wireless controller to begin pairing. Fast blinking of the Blue LED indicates that pairing is in progress.
• Using PS3 / PS4 / PS5 / Switch Pro wireless controller: After completing the connection according to the instructions of the Wired Connection, remove the USB cable, and then wake up the PS3 / PS4 / PS5 / Switch Pro wireless controller.

step. 3
Check whether the two Blue LEDs at the sides of the Wingman NS Lite are permanently on. This indicates that the connection is completed.

Connection Pairing Supplementary Instructions

step.1
Holding the LED buttons on the two sides of the Wingman NS Lite for 1 second will activate wireless connection pairing mode. The Wingman NS Lite will engage in pairing with surrounding Bluetooth devices. The pairing mode will end if:

• A. The connection pairing with the wireless controller is successful.
• B. The connection pairing is unsuccessful after 1 minute.
• C. The LED buttons are held for 1 second.

step. 2
Wireless connection records between an Xbox One wireless controller (with Bluetooth function)/ Xbox One Series 2 and the Wingman NS Lite will be erased if a wired connection is used. Wireless connection re-pairing will be required if a wireless connection is used.

Connect to PC

Connect to Switch

Turbo Function Settings

The following instructions are based on the Xbox One controller. For those using another controller, please refer to the Corresponding Buttons List.

Buttons that can be set as Turbo function buttons include: A, B, X, Y, LB, RB, LT, RT, LSB, RSB 10 (hereinafter referred to as FK)

Step 1. Enter setting mode:
Press VIEW + Xbox Guide, and the RED LED of the Wingman NS Lite will be permanently on.

Step 2. Choosing a FK button:
(e.g. Setting A as turbo function) Hold VIEW, then press A

Step 3. Completing Setting Mode:
Release all buttons, then press MENU to save settings.

Step 4. Exit setting mode:
Press Xbox Guide and the BLUE LED of the Wingman NS Lite will be permanently on.

Cancelling Turbo Function

• Step 1. Enter setting mode:
  Press VIEW + Xbox Guide, and the RED LED of the Wingman NS Lite will be permanently on.

• Step 2. Erasing all Turbo function buttons
  Press VIEW + MENU

• Step 3. Exit setting mode:
  Press Xbox Guide and the BLUE LED of the Wingman NS Lite will be permanently on.

Button Remap Settings
The following instructions are based on the Xbox One controller. For those using another controller, please refer to the Corresponding Buttons List.

Button Remap Settings
Buttons that can be Remap include: A, B, X, Y, LB, RB, LT, RT, LSB, RSB 10 (hereinafter referred to as FK)

• Step 1. Enter setting mode:
  Press MENU + Xbox Guide, and the RED LED of the Wingman NS Lite will be permanently on.

• Step 2. Choosing a FK button:
  (e.g. Setting X as A+B) Press X

• Step 3. Choosing the button to be set:
  Hold VIEW, then press A + B.

• Step 4. Completing setting mode:
  Release all buttons, then press MENU to save settings.

• Step 5. Exit setting mode:
  Press Xbox Guide and the BLUE LED of the Wingman NS Lite will be permanently on.

Cancelling Button Remap Settings

• Step 1. Enter setting mode:
  Press MENU + Xbox Guide, and the RED LED of the Wingman NS Lite will be permanently on.

• Step 2. Erasing all settings for Button Remap Settings.
  Press VIEW + MENU.

• Step 3. Exit setting mode:
  Press Xbox Guide and the BLUE LED of the Wingman NS Lite will be permanently on.

Notice
If the Xbox One Elite Series 2 controller is used, please turn on oFF controller profile settings to prevent interference with Wingman NS Lite’s Turbo or Remap settings. As the Xbox One Elite Series 1 controller is incapable of turning off profile settings, when using Wingman NS Lite, please make sure that the controller buttons are connected to the factory default settings to ensure the correct operation of the Turbo/Remap settings.

Firmware

Each Wingman NS Lite can only connect to a single device. Wingman NS Lite supports most of the accessories that are compatible with original factory specifications. To expand the number of supported accessories, firmware will be updated irregularly

• P/N: Wingman NS Lite
• M/N: ZPP005D

www.brookaccessory.com 

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>