Brook Vivid B0B4616H8D Wireless Controller for Switch User Manual
- June 3, 2024
- Brook Vivid
Table of Contents
- Brook Vivid B0B4616H8D Wireless Controller for Switch
- Packaging and accessories
- Product Specifications
- Button Instructions
- Connect Switch/Switch Lite
- Connect to Windows 7/8/10
- Connect to Android Device
- Connect to Apple Device
- Advanced Features
- FCC Statement
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
Brook Vivid B0B4616H8D Wireless Controller for Switch
- This controller supports Switch/Switch Lite/Android/Apple devices and Windows 7/8/10 etc.
- Support connection via Bluetooth and cable.
- Support motion sensing games (Switch/Switch Lite) and vibration. Built-in lithium battery which lasts for 15 hours.
- Support “HOME Button” to wake up Switch consoles.
- Support multiple playing methods with self-defined operation interface and button recording.
Thank you for purchasing this product. This manual describes the connection method of all supported devices in detail as well as the operation method of various additional personalized functions. Please read carefully, and it will increase the fun for sure while you play games.
Packaging and accessories
Product Specifications
- Name: Brook Vivid – Wireless Controller for Switch Model: ZPPQ004
- Size: L155 x W98 x H60 mm
- Battery capacity: 650 mAh
- Input Voltage/Current: DC3.7V/1A
- Current: 20-35 mA
- Connection Method : Bluetooth/Wired
- USB type : Type-C
- Charging/Battery Life : About 4 hours/about 10 hours Standby: 30 days after fully charged
Button Instructions
Connect Switch/Switch Lite
Connect Bluetooth
- Enter the first page of Switch Console, and click the controller icon below to enter the controller mode (Pic 1).
- Then click “Change Grip/Order” to enter the pairing interface (Pic 2).
- Press and hold “Pairing button” on the top of the controller for 2 seconds to turn on, with the quick flashing of RGB and LED on the controller to enter the pairing status (Pic 3).
- Once connected, press “HOME button” to return the main page for further operations (Pic 4).
The channel light is steady on once sucessful connected, RGB current light is red color by default.
Connect with Cable
- When the controller is off, it can be connected to Switch with the cable in the accessories.
- Switch games can be operated in the wired mode.
- After the wired connection is done, you can unplug the cable. The controller will enter the automatic connection status to pair the console.
Attention
Before connecting to Switch console with the wired mode, the connection function with cable is required to be turned on.
Way to turn on:
Setting->Controller and Sensors-> Wired connection on Pro controller: Choose “On” to turn on the wired mode or connect to Switch console.
Auto Reconnect and Wake up
Once the controller is connected to Switch, just press the “HOME button” on
the controller. And then the controller will reconnect to Switch automatically
and wake it up at the same time.
If the controller has been paired with other devices, you need to reconect to
the N-Switch according to method one or two
Connect to Windows 7/8/10
With Cable
Connect to the computer with the cable in the accessories. The indicator flashes when the controller is not fully charged. It will be always on after the controller is fully charged. Once connected to the computer, RGB default light is in blue.
Connect to Computer Bluetooth
There are some compatibility problems in certain computer versions.
Open the Bluetooth pairing interface, and search for the Bluetooth name of the
corresponding mode. Click the corresponding device, LED lights up after the
device is successfully paired.
Note: Please select the pairing mode according to the compatible mode of
the game. If the connection cannot be used normally, please reset and select a
new connection mode for pairing.
Connect to Android Device
Connect Bluetooth
Press and hold “B” and “HOME” buttons of the controller for 2 seconds. LED 1 of the controller flashes quickly to enter the Bluetooth search interface. LED 1 will be on after paired successfully while RGB is in green
Connect with Cable
Connect to Android device directly with the cable in the accesso-ries. The LED
light flashes when the controller is not fully charged. It will be always on
after the controller is fully charged.
To use it on Android devices, you need the games to support the controller
mode or to have a corresponding platform.
Connect to Apple Device
Connect Bluetooth
-
Apple devices support Bluetooth connection only.
(iOS, Mac OS) Bluetooth interface search, LED 2 will be on once connected. -
Press and hold “A” and “HOME” buttons of the controller for 2 seconds. LED 2 of the controller flashes quickly to enter the Bluetooth search interface for Apple device (iOS and Mac OS). LED 2 will be on after paired successfully while RGB is in purple.
In this mode, you can only play the games with the gamepad operation permission opened by the developer. Other incompatibilities don’t result from the product quality. Please check whether the game supports the controller operation before using it
Advanced Features
Action Mode (Self-defined Marco key)
Back keys AR/AL support to record and save up to 25 game actions for 30 seconds (recording and saving can be done with left/right joysticks, sL, sR, L, R, zL, zR, Up, Down, Left, Right, A, B, X and Y). It also supports to save with several buttons operated at the same time.
- Flip the back button switch of the controller to left to select Marco mode.
- Press and hold “AL” or “AR” button and press the ” ” button again. Under the current mode of the controller, LED starts to flash, indicating that AL or AR button has entered the programming status. After pressing the first button, the operation track within 30 seconds is recorded and saved. After recording, press AL or AR button again to save.
Note : When the recording exceeds 30 seconds, it will be cut off at 30 seconds (The recording will be also stopped if more than 25 buttons are used). Only the content within the recording limit will be saved.
Shoot Mode
- Flip the back button switch of the controller to right to select Shoot mode.
- After entering Shoot mode, press and hold AR button. The right joystick enters Precise mode. The range of the right joystick is controlled at 1/2 while releasing AR button will return to normal. While pressing and holding AL button, the left joystick enters Precise mode. The range of the left joystick is controlled at 1/2 while releasing AL button will return to normal.
Turbo Function
Close: Repeat the operations to close “Turbo” function.
LED 4 flashes with Turbo frequency.
Turbo Frequency Adjustment
- The Turbo frequency is divided into 3 levels: high, medium and low (15 times/s, 10 times/s and 5 times/s).
- The default setting is medium level (10 times/s).
A, B, X and Y Function Switching
Press and hold Setting button, and then press “SR” button to switch the functions of A & B, and X & Y. Repeat this operation to switch back to the original function setting.
Vibration and Strength Adjustment
(The function does not support Android or iOS.)
Vibrations in four levels (0/50%/70%/100%)
The default vibration level is 70%.
When the vibration intensity is adjusted to “0”, the vibration function is
turned off. It can be activated again by increasing vibration intensity.
RGB Light
Switch Mode: RGB in Red Windows Mode: RGB in Blue Bluetooth: RGB in Purple Android Mode: RGB in Green Apple Mode: RGB in Purple
Light Adjustment:
Press and “+” or “-“ button to switch between light colors.
Automatic Light Change Mode:
Long press for 3 seconds, and RGB light of the controller will automatically flash and change colors.
Auto reconnect
Once the controller is connected to the device via Bluetooth, just press “HOME
button” for 2 seconds, and the controller will be reconnected to your device
automatically. If the controller is paired with other devices, you need to
pair
again by following the instructions.
Sleep/Shutdown
The controller will automatically enter Sleep mode after 15 minutes without any operation. If you need to use it again, press “HOME button” to wake up the controller for further operation. Press “Pairing button” on the controller for 2 seconds to turn off the device.
Charging
When the controller is charging, 1-4 LED flashes slowly upon the battery
capacity. The LED lights are always on after the controller is fully charged.
In the wired mode, the LED lights flash slowly. When the controller is fully
charged, the LED lights are always on. When the controller is turned on, the
battery capacity is displayed by the number of LED lights (1: 25%, 2: 50%, 3:
75%, 4: 100%).
The displayed power is the approximate level. The displayed time lasts for 2
seconds.
Low battery Alert
When the battery level is low, the LED lights flash, indicating that the
controller needs to be charged.
When the power is too low, it will automatically shut down. After recharging,
it can be turned on and used normally.
It is recommended to charge the controller every 30 days when it is not used
for a long time.
Sensor
The controller contains built-in 6-axis gyroscope sensing mode, which supports
the game sensing experience during playing. The game can be operated by
shaking the joystick.
Requires: The game need to support the motion sensor game.
FCC Statement
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- This device must accept any interference received, including interference that may cause undesired operation.
NOTE : This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if
not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the
following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
This device has been evaluated to meet general RF exposure requirement. The
device can be used in portable exposure condition without restriction.
Attentions
- This product is not suitable for children of 3 years old and under.
- Please do not put this product in high temperature or high humidity environment.
- Do not try to disassemble this product in case of any unnecessary damage to the product.
- This product contains built-in battery. Please do not throw it away with domestic garbage.
- Do not charge the product near fire or other heat sources.
- Non-professionals should not disassemble this product; otherwise aftersales service will not be provided.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>