Brook ZPP006 Pocket iRecatcher User Manual

: June 1, 2024
: Brook

Table of Contents

Brook ZPP006 Pocket iRecatcher
Product Usage Instructions
Product Description
Power Supply
Auto Reconnection
Auto Tap
Nano Tape Usage Instructions
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

Brook ZPP006 Pocket iRecatcher

Product Specifications

Brand: iRecatcher
Model: Pocket iRecatcher Type-C
Cable Type: Type-C to Type-C
Compatibility: Lightning, iPhone, Lightning OTG devices
Power Supply: Type-C charging port
Indicator Lights: Blue for standby mode
Nano Tape Thickness: 0.7mm, 0.9mm, 1.2mm

Product Usage Instructions

Nano Tape Usage Instructions
To ensure proper functionality, follow these steps:

Match the nano tape thickness to your screen protector thickness.
Apply appropriate nano tape thickness for effective adhesion.

Power Supply Connection Instructions

For powering up the iRecatcher:

Connect the Type-C charging port to your smartphone’s Type-C charging port.
Use the Lightning OTG charging cable for iPhone models with a Lightning port.
Indicator light will show solid blue when in standby mode.

Nano Tape Storage and Cleaning Instructions

Ensure longevity and cleanliness of the nano tape:

Stick the protective film to the adhesive surface when not in use.
Clean the nano tape by gently scrubbing with mild water and mild detergent.
Dry the adhesive surface before reusing.

Nano Tape Replacement Instructions

When replacing the nano tape:

Peel off old nano tape completely.
Select the appropriate thickness of new nano tape and remove backing film.
Connect the branched port with the lightning symbol for charging.

Frequently Asked Questions (FAQ)

Q: How do I activate the auto-tap function on iRecatcher?
A: Short-press the button until the indicator light flashes blue to activate auto-tap function.

Q: What is the FCC ID and other identification numbers of iRecatcher?
A: FCC ID: 2ADKM006F R-R-ZP0-ZPP006F, ICID: IC:29174-ZPP006F, P/N: Pocket iRecatcher M/N:ZPP006, ver.202311V1

Product Description

Power Supply

Connect Type-C charging port of iRecatcher with Type-C charging port of your smartphone or other Type-C power supply. The Lightning OTG charging cable is compatible with all iPhone models that use Lightning port for power supply. After connected, the indicator light will show a solid blue, indicating that it’s in standby mode.

Lightning Charging Cable Connection Instructions

For the Lightning OTG charging cable, connect one end to the smartphone’s charging port. For the branched part with the “OTG” label, please connect it with the Type-C charging cable of the Pocket iRecatcher. If there’s a lightning charging cable, you can connect with the other branched port that with a lightning symbol. In order to charge your phone and supply power to iRecatcher at the same time.

Auto Reconnection

Align the circular display screen with the poke ball icon in the upper right corner of the game. Ensure that the poke ball is centered on the circular display screen. Firmly attach iRecatcher to the phone screen by moving it straight up and down.

When sticking, please first peel off the protective film on top of the nano tape. 2. Press and hold the button for 1.5 seconds, and iRecatcher will enter the “auto reconnection” mode. At this stage, the indicator light will display the following three states:

A solid green light indicates successful recognition, and the device is currently in “Connected” status.
A solid red light indicates successful recognition but is in “Not Connected” status.
In this case, iRecatcher will wait for a few seconds and then automatically tap the Poké Ball button on the phone’s screen to attempt reconnection. If the connection is unsuccessful, it will wait for a moment and try to reconnect again, repeating this step until a successful connection is established.
If the indicator light is not lit, it means recognition has failed, possibly due to not recognizing the Poké Ball or the Poké Ball not being placed correctly in the center of the circular display screen. Please readjust.

Press and hold the button for 1.5 second again to deactive the auto reconnection function

Auto Tap

In standby mode (solid blue light),align the circular display screen with the location you want to perform auto-taping, then firmly attach iRecatcher to the phone screen by moving it straight up and down.
When sticking, please first peel off the protective film on top of the nano tape first.
Short-press the button. When the indicator light is flashing blue, it indicates that the auto-tap function has been successfully activated, and it will begin auto-taping.
Short-press the button again to deactivate the auto-tap function.

Nano Tape Usage Instructions

To provide better performance, please apply the appropriate nano tape thickness based on your mobile phone screen protector’s thickness. Below are the corresponding nano tape thicknesses for different screen protector thicknesses:

$Brook-ZPP006-Pocket-iRecatcher-FIG- $16$$

Nano Tape Storage Instructions
When iRecatcher is not adhered to your phone, please stick the protective film to the Adhesive surface to extend the nano tape’s usability period.

Nano Tape Cleaning

Wet your finger with mild water and gently scrub the nano tape’s adhesive surface (you can use a small amount of neutral and mild detergent).
Place the cleaned nano tape in a dry environment or use low-temperature drying, waiting for the nano tap’s adhesive surface to completely dry.

Instructional Video：
https://www.brookaccessory.com/tw/irecatcher_clean

Nano Tape Replacement

Carefully peel off the old nano tape,ensuring that there is no residual adhesive.
Choose the appropriate thickness of the new nano tape and remove the white backing film.
Adhere the new nano tape to the iRecatcher’s bottom frame.
Remove the transparent protective film,and now you can reuse the iRecatcher.

Instructional Video：
https://www.brookaccessory.com/tw/irecatcher_gluereplacement/

Cautions

Before use, please clean the screen thoroughly.
If the position is confirmed but iRecatcher cannot perform tapping action, observe whether there is anyscreen shaking behavior. If there is, it is recommended to replace it with a thicker nano tape; otherwise, it is advised to apply more pressure or replace it with a thinner nano tape.
Once attached to the phone screen, if you find that the placement is incorrect, please remove iRecatcher from the screen and reapply it to the correct position.
Do not move it while it’s attached to avoid any position shifts due to adhesive strength.
This product is not waterproof or dustproof.
This product is compatible with IPhone X and later models (Model with no home button). For compatibility information regarding Android system phones, please refer to our official website.
Before use, check if there are any foreign objects in iRecatcher’s camera hole.
Nano tape can be reused by washing it with water.
When using, make sure to enable “Always” for location authorization permissions.