MANOR BROOK MB00856 Timberline 4 Light Chandelier User Guide
- October 30, 2023
- MANOR BROOK
Table of Contents
Model # MB00856
SKU#1007018293
USE AND CARE GUIDE
TIMBERLINE 4 LIGHT CHANDELIER
THANK YOU
We appreciate the trust and confidence you have placed in Manor Brook through
the purchase of this light fixture.
We strive to continually create quality products designed to enhance your
home.
Thank you for choosing us!
Safety Information
- Consult a qualified electrician with any electrical questions you may have.
IMPORTANT: Inspect the wire insulation for any cuts, abrasions, or exposed copper that may have occurred during shipping. If there is a defect in the wire, do not continue the assembly process. Please call our Customer Service Team at 904-642-4340.
Warranty
1-YEAR LIMITED WARRANTY WHAT IS COVERED
The manufacturer warrants this lighting fixture to be free from defects in the
materials and workmanship for a period of one (1) year from date of purchase.
This warranty applies only to the original consumer purchaser and only to
products used in normal use. If this product is found to be defective, the
manufacturer’s only obligation, and your exclusive remedy, is the repair or
replacement of the product at the manufacturer’s discretion, provided that the
product has not been damaged through misuse, abuse, accident, modifications,
alterations, neglect or mishandling. This warranty shall not apply to any
product that is found to have been improperly installed, assembled, or used in
any way not in accordance with the instructions supplied with the product.
This warranty shall not apply to a failure of the product as a result of an
accident, misuse, abuse, negligence, alteration, faulty installation, or any
other failure not relating to faulty material or workmanship.
WHAT IS NOT COVERED
This warranty shall not apply to the finish on any portion of the product due
to weathering, as this is considered normal wear. The manufacturer does not
warrant and specifically disclaims any warranty, whether expressed or implied,
other than the warranty contained herein. The manufacturer specifically
disclaims any liability and shall not be liable for any consequential or
incidental loss or damage, including but not limited to, any labor or expense
costs involved in the replacement or repair of the product.
Contact the Customer Service Team at 904-642-4340.
Pre-Installation
PLANNING INSTALLATION
Read all instructions before assembly.
To avoid damaging this product, assemble it on a soft, non-abrasive surface
such as carpet or cardboard. Inspect each part for defects that may have
occurred during shipping.
Keep your receipt and these instructions for proof of purchase.
NOTE: This pendant requires the use of four 120V, 60Hz, 60-Watt max,
candelabra-base type B bulbs (not included).
Do not exceed the recommended wattage.
TOOLS REQUIRED
HARDWARE INCLUDED
NOTE: Hardware not shown to actual size.
Part | Description | Quantity |
---|---|---|
AA | Wire nut | 3 |
BB | Cross bar | 1 |
CC | Outlet box screw | 2 |
DD | Lock nut | 2 |
EE | Ground screw | 1 |
FF | Nipple | 1 |
GG | Canopy | 1 |
HH | Screw Collar Loop | 1 |
II | Screw Collar Nut | 1 |
JJ | Chain | 1 |
KK | Quick link | 2 |
PACKAGE CONTENTS
Part | Description | Quantity |
---|---|---|
A | Chain loop | 1 |
B | Fixture body | 1 |
C | Finial | 2 |
Assembly
-
Assemble the fixture body
Carefully unpack the fixture, lay out all parts on clean surface.
The metal rings have been turned to lay flat for shipping, turn the metal rings carefully so that they are evenly spaced apart as shown, and then secure with two finials.
Screw the chain loop (A) to top of the fixture body (B). -
Preparing the light fixture to hang
□ Attach the quick link (KK) to one end link of chain (JJ) and attach the quick link (KK) to the chain loop (A).
NOTE: The quick link (KK) must be fully threaded closed.
□ Remove chain links from the chain (JJ) in order to achieve the desired length for hanging the fixture .
□ Thread the fixture and bar copper or silver ground wires up through every other link in the chain (JJ).To open a chain link: Use a pair of pliers and a screwdriver as shown above to open a chain link.
Wrap the jaws of the pliers with cloth to protect the finish of the chain.
Installation
-
Installing the cross bar
CAUTION: Ensure the power is off at the main fuse box prior to beginning installation.
□ Turn off the switch at the wall.
□ Turn the power off at the main fuse box.
□ Install the cross bar (BB) with nipple (FF), lock nut (DD) to the outlet box using two outlet box screws (CC).
□ Unscrew the screw collar nut (II) from the screw collar loop (HH).
□ Slide the screw collar nut (II) and then the canopy (GG) onto the end of the chain (JJ).
□ Attach the quick link(KK) to end of the chain (JJ) and attach the quick link (KK) to the screw collar loop (HH).
NOTE: The quick link (KK) must be fully threaded closed.
□ Insert the fixture wires up through the nipple (FF). -
Connecting the wires
□ Install the fixture bare ground wire (1) under the ground screw (EE) on the crossbar (BB).
□ Connect the fixture bare ground wire (1) to the green (or bare, or green & yellow)supply ground wire (2) in the outlet box using a wire nut (AA).
□ Connect the ribbed fixture wire (3) to the white (or ribbed) supply wire (4) in the outlet box using a wire nut (AA).
□ Connect the smooth fixture wire (5) to the black (or red, or blue) supply wire (6) in the outlet box using a wire nut (AA). -
Hanging the light fixture
□ Push all excess wires into the outlet box.
□ Raise the canopy (GG) to the ceiling and secure in place by screwing the screw collar nut (II) onto the screw collar loop (HH). -
Installing the bulbs
□ Prior to installing the bulb, inspect socket for silica packet. If packet is present, then remove and throw away. Do not expose it to children or pets.
□ Install four 120V, 60Hz, 60-Watt max., candelabra-base type B bulbs (not included) into the sockets of the light fixture.
Care and Cleaning
- Clean the light fixture with a soft, dry cloth. Do not use any cleaners with chemicals, solvents, or harsh abrasives.
Troubleshooting
Problem | Possible Cause | Solution |
---|---|---|
“lhe bulb will not light. | ❑The bulb is burned out. | ❑Replace the light bulb. |
❑The power is off. | ❑Ensure that the power supply is turned on. | |
❑There is a faulty wire connection. | ❑Check the wiring. | |
❑The circuit breaker is off. | ❑Ensure that the circuit breaker is set in the |
on position.
The fuse blows or a circuit breaker trips when the light is turned on.| ❑There
is an exposed wire.
❑There are too many items on one circuit.| ❑Discontinue use of the light
fixture.
❑Contact a qualified electrician or call the Customer Service Team at
904-642-4340.
❑Unplug other items on the circuit.
Questions, problems, missing parts? Before returning to the store,
call Manor Brook Customer Service
8 a.m.-6 p.m., EST, Monday-Friday
904-642-4340
Documents / Resources
|
MANOR BROOK MB00856 Timberline 4 Light
Chandelier
[pdf] User Guide
MB00856, 1007018293, MB00856 Timberline 4 Light Chandelier, MB00856
Timberline, MB00856 4 Light Chandelier, Timberline 4 Light Chandelier, 4 Light
Chandelier, Timberline Chandelier, Timberline, Chandelier
---|---
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>