Brook UFB-UP5 Universal Fighting Board Upgrade Kit User Guide
- October 30, 2023
- Brook
Table of Contents
Brook UFB-UP5 Universal Fighting Board Upgrade
Product introduction and function
UFB-UP5 is an upgrade kit for Fighting Boards. After connecting UFB-UP5 to Fighting Board and updating the firmware, it will be compatible with PlayStation®5 console.
Product content
-
UFB upgraded kit (UFB-UP5) (L21 mm x W19.5mm x H6.6mm)
-
10cm 5Pin signal line /2.0mm
-
90o Wafer Connector/ 2.0mm
-
15cm 2Pin power cable /2.0mm
Layout description
How to connect
-
PS4+ Audio connects to UFB-UP5
-
UFB connects to UFB-UP5
-
PS3/PS4 FB Plus connects to UFB-UP5
-
PS3/PS4 FB connects to UFB-UP5
Assembly instruction
The following instructions are based on the UFB.
Step1
Check whether there is a wafer connector in the position of J2 in UFB. If not, you need to weld the Wafer connector at J2.
Step2
Connect signal line and power cable to UFB-UP5 and UFB. There is a detail you need to notice that the red line connects VDD_5V and a black line connects GND of a signal line.
Step3
After connecting UFB-UP5 to UFB, please update the firmware of UFB. Firmware download: https://www.brookaccessory.com/download/PS4/
Step4
Press PS button and SHARE/ SELECT button at the same time, then connect the arcade stick to the PC / laptop.
Step5
Click start button to update, then click finish button when it’s done. You will be able to enjoy your game on PlayStation®5.
Brook Design, LLC.
Visit our website for more information and assistance
©2022 Zeroplus Technology Co. Ltd All Rights Reserved Brook is the registered trademark of Brook Design, LLC. The other trademark names are the used marks, trademarks or registered trademarks of the corresponding companies.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>