WARING WDB600 Double Burner with Toggle Switch Instructions
- June 13, 2024
- WARING
Table of Contents
WDB600 Double Burner with Toggle
Switch Instructions Double Burner with Toggle Switch
WDB600
WDB600 Double Burner with Toggle Switch
| Illustration# | Part# | Description |
|---|---|---|
| 1 | 37470 | Toggle Switch (2 required) |
| 2 | 37471 | Knob (2 required) |
| 3 | 37472 | 14″ Blue Double Lead Assembly |
| 4 | 37473 | 26″ Blue Double Lead Assembly |
| 5 | 31118 | Heating Element Spring Washer (4 required) |
| 6 | 31117 | Heating Element Screw (4 required) |
| 7 | 31115 | Ground Lead Nut |
| 8 | 31116 | Ground Lead Spring Washer |
| 9 | 37474 | 12.25″ Brown Lead Assembly |
| 10 | 37475 | 27.5″ Brown Lead Assembly |
| 11 | 37476 | Green Ready Light with White Lead Assembly (2 required) |
| 12 | 19123 | Crimp Connector (2 required) |
| 13 | 13731 | Wire Ties (5 required) |
| 14 | 37477 | Small Rubber Sleeve (7 required) |
| 15 | 37478 | Large Rubber Sleeve |
| 16 | 031104 | Cord |
| 17 | 31103 | Strain Relief |
| 18 | 31112 | Center Burner Shaft Washer (2 required before bottom plate) |
| 19 | 31129 | Bottom Plate |
| 20 | 31108 | Screw (8 required) |
| 21 | 31109 | Screw (8 required) |
| 22 | 31120 | Plastic Feet (4 required) |
| 23 | 31106 | Rubber Feet (4 required) |
| 24 | 31107 | Screw & Washer Set (4 required comes with screw, 3 washers, 1 |
spring washer and 1 nut)
23| 31112| Center Burner Shaft Washer (2 required after bottom plate)
24| 31111| Center Burner Shaft Spring Washer (2 required after bottom plate)
25| 31110| Center Burner Shaft Nut (2 required after bottom plate)
Double Burner with Green Ready Light and Red On Light WDB600 (parts listed below are different from the current model)
| Illustration# | Part# | Description |
|---|---|---|
| 1 | 031098 | Knob (2 required) |
| 2 | 031109 | Screw (4 required) |
| 3 | 031100 | Bracket with Micro Switch (2 required) |
| 4 | 031125 | 22″ Red Lead (small burner side) |
| 031126 | 14″ Red Lead (large burner side) | |
| 9 | 031127 | 7 Lead Set (small burner side) |
| 031128 | 7 Lead Set (large burner side) | |
| 10 | 031124 | Connector Sleeve (2 required) |
| 11 | 031113 | Lead Sleeve (4 required) |
314 Ella T. Grasso Ave.
Torrington, CT 06790
Tele. 1-800-269-6640
Fax860-496-9017
www.waringcommercialproducts.com
Revised May 19, 2023
Documents / Resources
|
WARING WDB600 Double Burner with Toggle
Switch
[pdf] Instructions
WDB600 Double Burner with Toggle Switch, WDB600, Double Burner with Toggle
Switch, Burner with Toggle Switch, Toggle Switch
---|---