SmallRig ZV-E1 Sony Cage Kit User Manual
- June 1, 2024
- SmallRig
Table of Contents
SmallRig ZV-E1 Sony Cage Kit
Thank you for purchasing Small Rig’s product.
Warnings
- Please read this User Manual carefully.
- Please keep this User Manual. Always keep this User Manual.
- When passing the products on to the third party.Heed all warnings and follow all instructions in this User Manual.
In the Box
Product Details
- l/4″-20 Threaded Hole
- Cold Shoe Mount
- Strap Slot
- ARRI 3/8″-l 6 Locating Hole
- OD Socket
- Dual-Head Wrench
- Arca-Swiss Quick Release Plate
- Left Side Lock Adapter
- Right Side Lock Adapter
- Silicone Grip
Cage Installation Introduction
- Use the included Dual-Head Wrench to remove the Left and Right Side Lock Adapters from the cage.
- Remove the camera lens and place the camera into the cage from the back to the front.
- Use the Dual-Head Wrench to secure the bottom l/4″-20 screw, but do not fully lock it
- After fixing the Left and Right Side Lock Adapters with the camera shoulder strap slots, lock them via the Dual-Head Wrench.
- Use the Dual-Head Wrench to lock the bottom l/4″-20 screw.
HDMI Cable Clamp Installation Introduction
- Open the camera HDMI cover and insert the HDMI cable.
- Attach the HDMI Cable Clamp to the left side of the cage with the thumbscrew and lock the cable in place.
Silicon Grip Disassembly
Use the Allen Wrench to remove the screw holding the silicone grip, and then remove the silicone grip.
Compatibility
SonyZV-E1
Specifications
Product Dimensions: 159.5 x 89.8 x 65.5mm Product Weight 17 4.0 ± 5.0g
Material(s): Aluminum Alloy, Stainless Steel, Silicone
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>