SmallRig 4533 Cage for Sony Alpha 9 III User Manual
- May 15, 2024
- SmallRig
Table of Contents
SmallRig 4533 Cage for Sony Alpha 9 III
Thank you for purchasing SmallRig’s product.
Warnings
- Please read this User Manual carefully.
- Please read the instruction manual carefully and follow all safety warnings.
In the Box
- Cage x 1
- HDMI Cable Clamp x 1
- User Manual x 1
Product Details
- 1/4′-20 Threaded Hole
- 3/8′-l 6 Threaded Hole
- ARRI 3/8′-l 6 Locating Hole
- M4 Threaded Hole
- Arca-Swiss Plate
- Cold Shoe Mount
- Strap Slot
- QD Socket
- NATO Rail
- Dual Head Wrench
- Side Lock Adapter
Cage Installation
Before Installation:
Please remove the camera lens and the shoulder strap hook on the left side.
Step 1:
Use the Dual Head Wrench to lock the bottom 1/4′-20 screw
Step 2:
Use the Dual Head Wrench to remove the M4 screws at the bottom of the cage,
and align and tighten the M4 screws to the corresponding positions to secure
the cage
Step 3:
Use the Dual Head Wrench to loosen the screw that fixes the locating block,
but do not unscrew it completely. Align and tighten it close to the camera
strap groove.
Step 4:
Use the Dual Head Wrench to remove the screw at the front of the locating
block. Align the removed screws into the camera strap slot and secure the cage
and camera by tightening them with the Dual Head Wrench
Specifications
Compatibility | Sony Alpha 9 Ill |
---|---|
Product Dimensions | 165.0 x 70.3 x 112.5 mm/6.5 x 2.8 x 4.4in |
Product Weight | 194.0 ± 5.0g/6.8 ± 0.2oz |
Material (s) | Aluminum Alloy, Stainless Steel |