ISUZU TN0040B Car Audio Instruction Manual
- June 16, 2024
- ISUZU
Table of Contents
ISUZU TN0040B Car Audio Instruction Manual
Operation Manual
| Model name | Car Audio |
|---|---|
| Model No | TN0040B |
Index : Page
- Specification of the EUT: 2P
- Button Function Spec :3P
- Radio operation procedure :4P
- Operating manual (Bluetooth/Handsfree): 5P
- FCC Operating manual Requirement :6P
Specification of the EUT
| Equipment name | Car Audio |
|---|---|
| Model name | TN0040B |
| Brand | ISUZU |
| FCC ID | BABTN0040B |
| IC Number | – |
| Purpose of the equipment | Vehicle installation |
| Function | Broadcast radio receiver : AM/FM/RDS/DAB Bluetooth : Hands Free and |
Audio WIFI : For Wireless Carp lay/AndroidAutoGNSS : GPS, Galileo, GLONASS,
QZSS
RATED VOLTAGE| 12.0V (10.5～16.0V) – ground
LOAD IMPEDANCE| 4Ω
BACK UP CURRENT| 1mA or less
RATED CURRENT| 1.98Ａ or less(Vic=13.2V, 0.5W output)
AM TUNING RANGE| 522 – 1710 kHz (9kHz step)
FM TUNING RANGE| 87.5 – 108 MHz (100kHz step)
DAB TUNING RANGE| 174.928 – 239.200 MHz
Rating of usage environment| – 30 to +65 °C(Performance assured temperature
range)
Size of Equipment| D 178.15mm×W 253.89mm×H 174.09mm
Weight of Equipment| 2012g
Software version| –
Hardware version| –
Button Function Spec
| Button No. | Button Name | Operation |
|---|---|---|
| ① | TUNE/MODE | Push knob: Transition to Mode selection screen Rotate |
knob: Jump between preset channels
②| TALK| Short Push: Transition to Dial screenLong Push: Transition to
Bluetooth pairing screen
③| HOME| Transition to home screen
④| BACK| Transition to previous screen
⑤| VOLUME/POWER| Push knob: Audio ON/Orotate knob to the right: Adjust volume
by +1 Rotate knob to the left: Adjust volume by -1
Radio operation procedure
Operation procedure
After the ACC-ON, confirm that Isuzu screen is displayed.
CAUTION
The screen is changed to “CAUTION” screen after a few seconds.
Note : It takes a little longer for the first time of ACC-ON.
Continue
Press the “Continue” button on the face panel after a few seconds to move MENU
screen.
POWER
Press the POWER button.
When the Radio Mode Window on the screen is pressed,”FM1″ screen is displayed
SEEK
Confirm that the screen is changed as below, Please push down the ”<”button or
”>”button. This will start to SEEK
.
AM/DAB
Same as AM/DAB mode.
Operating manual (Bluetooth/Handsfree)
Operation procedure
After the ACC-ON, confirm that Isuzu screen is displayed.
CAUTION
The screen is changed to “CAUTION screen after a few seconds.
Note : It takes a little longer for the first time of ACC-ON.
Continue
Press the “Continue” button on the face panel after a few seconds to move MENU
screen.
Setting
Please press the “Setting” button on the face panel to move to Settings screen
Add Device
Please press the ”Add Device” button of the screen
Search Device
Please press the ”Search Device” button of the screen
Bluetooth
Confirm if screen is changed as below, Please set iPhone or iPod in pairing
mode.
Displays when you have more than one pairing equipment
Select the iPhone or iPod to connect.
Operate the phone after the message on the screen
Connection Completed
”Connection Completed” is displayed if completed.
FCC Operating manual Requirement
CAUTION : Radio Frequency Radiation Exposure
This equipment complies with FCC radiation exposure limits set forth for
uncontrolled
equipment and meets the FCC radio frequency (RF) Exposure Guidelines. This
equipment should be installed and operated keeping the radiator at least 20cm
or more away from person’s body
Co-location: This transmitter must not be co-located or operated in
conjunction with any
other antenna or transmitter
This device complies with part 15 of the FCC Rules. Operation is subject to
the following
two conditions: (1) This device may not cause harmful interference, and (2)
this device must accept any interference received, including interference that
may cause undesired operation
FCC WARNING
Changes or modifications not expressly approved by the party responsible for
compliance
could void the user’s authority to operate the equipment.