whall ZM1523 Masticating Slow Juicer User Manual
- June 17, 2024
- Whall
Table of Contents
whall ZM1523 Masticating Slow Juicer
Household use only
For optimal performance, please read the user guide carefully before using your new appliance. We also recommend keeping the instructions for future reference to easily recall its functions
SAFETY PRECAUTIONS IN USE
- The input voltage of the appliance is 120V/60Hz. Please confirm it before using the appliance.
- Do disconnect the power supply before dismantling, assembling or adjusting any part of the appliance.
- The appliance has Y connection. If its power cord is damaged, please contact our customer service department for a replacement to avoid danger. Do not dismantle and repair it by yourself.
- Before use, please check if the power cord, the plug, the juice strainer, the spiral pusher and any other parts are damaged. lf any of the said part is damaged, stop using the appliance and contact our customer service department promptly. Do not dismantle and repair it by yourself, otherwise danger may happen.
- lf it is necessary to repair the appliance during use, please contact our customer service department. Do not dismantle it by yourself, otherwise dangers may happen.
- lt is necessary before connecting the power supply to ensure that the juicing body, the spiral pusher, the juicing body cap and all other dis-mountable parts are properly installed.
- Never put hands or sharp objects into the feed port or contact the spiral pusher when the appliance is running, otherwise injuries may be caused or the appliance may be damaged; never replace the spiral pusher with any other objects or have eyes get close to the feed port, otherwise accidents may happen.
- Cut food ingredients into small blocks with sizes fitting the feed port of the juicing body. Do not begin to process any vegetables or fruits with cores, hard seeds or thick skin or shells until they are removed.
- When feeding a food ingredient, do not make the pushing force too large but have it just enough to cut the food ingredient.
- Dyeing of the juice strainer, the juicing body cap, the spiral pusher and other accessories after juicing some vegetables or fruits is normal and will neither affect food eating nor do harm to health.
- Do not dismantle the dis-mountable parts of the appliance immediately after use but after both the motor and the spiral pusher have stopped and the power supply is disconnected.
- Do not sterilize any accessories of the appliance with hot water that is higher than 80 ℃ or a microwave oven, otherwise, they may be heated, deformed and damaged. The materials of all parts in contact with food ingredients should comply with food hygiene certification and be clean, hygienic and reliable.
- Do not put the main body into water or another liquid or flush it with water or another liquid, otherwise it may be damaged.
- Do not clean the appliance with steel wool, abrasive cleaning agents or corrosive liquids(such as gasoline or acetone].
- The appliance is applicable to use by individuals or families only.
- The appliance is not to be used by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction.
- Accessories, other than those supplied with the appliance, include instructions for their safe use.
- Use a wet cloth to clean surfaces in contact with food before unplug the plug.
- Switch off the appliance and disconnect from supply before changing accessories or approaching parts that move in use.
- If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified persons in order to avoid a hazard.
- Warning: potential danger may be against misuse
- Always disconnect the appliance from the supply if it is left unattended and before assembling, disassembling or cleaning.
- To enhance product durability and safeguard its functionality, we have integrated an intelligent protection chip into the device. This chip ensures that after 20 minutes of uninterrupted operation, the device will automatically stop. For optimal protection and extended lifespan, we kindly advise waiting for 20 minutes before resuming its usage.
PARTS AND FUNCTIONS
The masticating slow juicer incorporates IMD touch buttons on its control
screen. The control screen offers various functions, including Soft Speed,
Hard Speed, Power, and Reverse. Here’s a detailed description of each
functions
DIRECTIONS FOR USE
- Before using the appliance for the first time, clean its parts in contact with food ingredients thoroughly
Use of the appliance
Please install and use the appliance following the steps below.
|
---|---
Connect the juicing body and the main body:
1. Have the triangular aligning sign“▼” on the juicing body aligned with the aligning “unlocking triangular sign” on the main body and then put the juicing body into the main body (the three clips on the juicing body will realize alignment).
2. Then turn the juicing body anticlockwise. When there is a click, it suggests that the connection is finished.
|
Install the tray on the upper end of the feed port of the juicing body. The tray can make feeding of food ingredients more conveniently, particularly when small-particle food ingredients are processed.
|
Have the hexagonal shaft of the spiral pusher aligned with the hole on the main body and push it horizontally until it reaches the bottom (when alignment fails, just turn the spiral pusher slightly
| Fit the larger-hole end of the juicer strainer into the tail of the spiral pusher and push it while the three clips of the juicer strainer align with the three clamping slots in the juicing body.(The juice strainer is used with the juicing button in the rear only. This function is used for juicing.)
|
---|---
Align the triangle alignment mark on the juice extractor with the unlock
triangle mark on the juice extractor, and then put the end cup into the juice
extractor.| Put food ingredients into the feed port on the juicing body cap to
squeeze the fed food ingredients gently for their full contact with the spiral
pusher and higher juice extraction efficiency.
__
|
Put the juice cup in the corresponding place and have its opening aligned with the bottom of the juice outlet of the juicing body.| Put the pulp cup below the pulp outlet of the juicing body and have it close to the juice cup.
MAINTENANCE
- Before cleaning the appliance, do switch off the switch and disconnect the power supply.
- After use, clean the appliance promptly.
- Do not wash the main body with water but wipe the stains on it with a piece of wrung rag or cotton cloth.
- Before storing the appliance, make sure it is clean and dry.
- Clean the appliance after dismantling it following the steps below.
|
---|---
After the operation is completed, please remove the juice cup and pulp cup in
order and rinse them directly with water.|
Disassemble the end cup and rinse it with water directly.
|
Remove the filter and rinse it with water. For any food residue, you can use a brush for cleaning.
|
Remove the auger and rinse it with water directly.
|
---|---
Remove the pusher and rinse it with water directly.| Remove the tray and rinse
it with water directly.
|
To disassemble the juicing body, press and hold the button to unlock it, and then rotate the juicing body in the opposite direction to disassemble it.|
Remove the juicing body and rinse it with water directly.
|
After removing the juicing body, remove the juicing button, juicing body cap, juice strainer (or squeezer), and other detachable parts. These parts can be flushed with clean water.
SAFETY INDEXES
Notes:
- What given about are the analysis and elimination methods of ordinary faults. For other faults, please contact our customer service department. Do not dismantle and repair it by yourself.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>