Anolis CALUMMA M LED Lighting Installation Guide
- June 1, 2024
- ANOLiS
Table of Contents
Anolis CALUMMA M LED Lighting
Product Information
The CALUMMA series (M / L / XL SC and MC) by ROBE lighting is a versatile lighting fixture designed for professional use. It must be installed by a qualified electrician following all relevant electrical and construction codes. The fixture is classified as class one and must be properly grounded.
Specifications
- Model: CALUMMA M / L / XL SC and MC
- Manufacturer: ROBE lighting s. r. o.
- Country of Origin : Czech Republic
- Version: 6.0 / 8_2023
Product Usage Instructions
Step 1: Installation Using Yoke
- Choose fasteners suitable for your mounting surface.
- Drill two holes on the surface as per the provided dimensions for your specific model (Calumma M/L/XL).
- Secure the Yoke of the fixture to the surface using washers, spring washers, and screws.
Step 2: Cable Gland Installation
Thread the cable through the gland as shown in the provided image. Do not fully assemble the gland yet. Use a wrench size 22 for cable gland M20x1.5. Strip the cable to the following lengths for power and data connections:
| Power Connection| Data Connection
---|---|---
A| 9mm| 9mm
FAQ
- Q: Can I install the CALUMMA fixture myself?
- A: No, the fixture must be installed by a qualified electrician in compliance with all applicable electrical and construction codes.
- Q: What type of connections does the fixture support?
- A: The fixture supports various connections including power, data, wireless DMX, and DMX or Ethernet via E-Box. Refer to the manual for detailed wiring instructions.
INSTALLATION INSTRUCTIONS
Fixture must be installed by a qualified electrician in accordance with all national and local electrical and construction codes and regulations. This device falls under class one and must be grounded!
STEP 1 CALUMMA INSTALLATION USING YOKE
- Fasten the Yoke of the fixture to the surface by two washers, spring washers and screws.
- Use fasteners that are appropriate for use with your mounting surface
- Use an Allen key to release tilting lock on each side of luminaire and adjust tilt of LED module in range of +180°/-180°.
STEP 2 CABLE GLAND INSTALLATION
Slip the cable through the gland according to the picture below and do not
assemble the gland yet.
Use wrench size 22 for cable gland M20x1.5
STEP 3
CONNECTION – CE
(JUNCTION BOX IS NOT PART OF THE PACKAGE)
DMX or ETHERNET via E-Box with Leader and Jumper Cable
UNLOCK
CONNECTION – US
(JUNCTION BOX IS NOT PART OF THE PACKAGE)
DMX connection
NOTE: DMX line of Calummas M/L/XL has to be terminated at the last fixture.
EITHER connect a 120 Ohm resistor between terminals + and – in the junction box at last fixture. OR terminate via RDM Set the ‘Manufacturer PID’ ’Terminator active’ to ‘1’ at last fixture by means of RDM Control Panel.
Ensure ONLY the last fixture in the line is terminated using ONE of the above methods! If connected to E-box Star, the last fixture on each line needs to be terminated.
STEP 4
CABLE GLAND INSTALLATION
- Assemble the cable gland according to the picture.
- Use wrench size 22 for cable gland M20x1.5 Install Cable glands individually!
- We recommend applying an adequate layer of the paste LOCTITE 5331 on the plastic holder of the cable gland before inserting in into the body of the gland and an adequate layer of the paste LOCTITE 577 on the thread of the gland body.
- Failure to properly install cable glands will result in failure of the water-tight seal!
STEP 5
INSTALLATION OF ACCESSORIES
- Place the accessories (TOPHAT, HALF TOPHAT, OPTICAL DEMO SET) onto the luminaire and centre it.
- Fasten the accessories (TOPHAT, HALF TOPHAT, OPTICAL DEMO SET) to the luminaire by the 4 packed-in washers and screws.
FOR ALL INSTALLATION VERSIONS
- Pull the cable through the inside of the Pole Adaptor and the cable gland and return to STEP 3.
SCAN
QR code for Installations Instructions
ROBE lighting s. r. o.
- Palackeho 416 757 01 Valasske Mezirici Czech Republic
- Tel.: +420 571 751 500
- E-mail: info@anolis.eu
- www.anolislighting.com
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>