Anolis MC Calumma XS LED Lighting User Manual

Anolis MC Calumma XS LED Lighting

Product Information

Specifications:

• Model: Calumma XS
• Version: 1.14
• Compliance: FCC Part 15, EN 55035
• Wireless Operation: RF Exposure Compliant
• Maximum Calummas XS per E-box Remote: 32

Product Usage Instructions

Safety Instructions:
It is crucial to follow safety instructions to ensure safe operation and maintain warranty validity:

• Avoid unauthorized modifications to the fixture.
• Use original packaging for transportation.
• Avoid exposing the product to high-frequency electromagnetic fields above 3V/m.
• Handle fixtures with Harsh Environment Finish (HEF) carefully to prevent paint damage.

Fixture Exterior View:
The Calumma XS features:

1. Transparent glass cover
2. Mounting yoke
3. Tilt adjusting lock
4. LED module with heat sink

Control and Connection:
To operate the Calumma XS modules:

1. Connect to the E-Box Remote or E-Box Remote Basic via junction boxes.
2. Operate in Pass-Through mode.
3. Ensure E-box Remote is switched to Pass-Through mode.
4. Maximum of 32 Calummas XS can be connected in one string to an E-box Remote.

Frequently Asked Questions (FAQ)

• Can I connect more than 32 Calummas XS to an E-box Remote?
  No, the maximum number of Calummas XS that can be connected in one string to an E-box Remote is 32 due to operational requirements.

• What should I do if I encounter high-frequency electromagnetic fields during operation?
  Avoid exposing the product to high-frequency electromagnetic fields above 3V/m as it may lead to potential damages. Ensure proper handling and operation as per the manual.

INTRODUCTION

• FOR YOUR OWN SAFETY, PLEASE READ THIS USER MANUAL CAREFULLY BEFORE POWERING OR INSTALLING YOUR Calumma !
• This device has left our premises in absolutely perfect condition. In order to maintain this condition and to ensure safe operation, it is absolutely necessary for the user to follow the safety instructions and warnings written in this manual.
• The manufacturer will not accept liability for any resulting damages caused by the non-observance of this manual or any unauthorized modification to the device.
• Unauthorized modification will void warranty.

Safety instructions

DANGEROUS VOLTAGE CONSTITUTING A RISK OF ELECTRIC SHOCK IS PRESENT WITHIN THIS UNIT!

• Always disconnect the fixture from power before cleaning, servicing or installing.
• This fixture should be operated only from the type of power source indicated on the marking label. If you are not sure of the type of power supplied, consult your authorized distributor or local power company.
• Always disconnect the fixture from AC power before servicing or cleaning.
• Make sure the power/data cable is not damaged by sharp edges.
• Do not install the unit near an open flame.
• Refer servicing to qualified service personnel.
• Do not connect this fixture to a dimmer pack.
• This fixture falls under protection class III.
• LED light emission. Risk of eye injury. Do not look into the beam from a short distance without suitable protective eyewear. Do not look at LEDs with magnifiers or similar optical instruments that may concentrate the light output.
• The fixture was designed for outdoor use. This fixture must not be used for underwater installation.
• When choosing the installation spot, please make sure that the fixture is not exposed to extreme heat or dust.
• Avoid using the unit in locations subject to possible impacts.
• The fixture body never must be covered with cloth or other materials when the fixture is under operation.
• Only operate the fixture after having checked that the housing is firmly closed and all screws are tightly fastened.
• The fixture becomes hot during operation. Allow the fixture to cool approximately 30 minutes prior to servicing or maintenance.
• Please consider that unauthorized modifications on the fixture are forbidden due to safety reasons!
• Please use the original packaging if the fixture is to be transported.
• If this device will be operated in any way different to the one described in this manual, the product may suffer damages and the warranty becomes void. Furthermore, any other operation may lead to dangers like short-circuit, burns, electric shock etc.
• The product (covers and cables) must not be exposed to a high frequency electromagnetic field higher than 3V/m.
• Immunity of the equipment is designed according to the standard EN 55035 Electromagnetic compatibility of multimedia equipment – Immunity requirements
• Emission of the equipment complies with the standard EN55032 Electromagnetic compatibility of multimedia equipment – Emission Requirements according to class B.
• Contains FCC ID: 2A6PL-DMXRDMRW001
• Contains IC: 29573-DMXRDMRW001
• This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
• Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
• The [Device] wireless operation is safe and complies to RF Exposure requirements.
• This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
• However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
  • Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and receiver.
  • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
  • Consult the dealer or an experienced radio/TV technician for help.

Warning for fixtures with Harsh Environment Finish (HEF):

• Handle with care!
• Avoid any damage to the painted surface.
• Damaging the paint may result in corrosion and loss of warranty.

Fixture exterior view

1. Transparent glass cover
2. Mounting yoke
3. Tilt adjusting lock
4. LED module with heat sink

Control and connection

The Calumma XS modules should be connected to the E-Box Remote or E-Box Remote basic via junction boxes. The Calumma XS modules have to be operated in Pass- Through mode.
The E-box Remote has to be switched to the Pass-Through mode.

Example of connection with E-box Remote

Example of connection with E-box Remote Basic

Note. Combination of Calummas XS and Emineres Remote is also possible.
Example:

• From point of view of driver load (E-box Remote/E-box Remote Basic), max. number of Calummas connected to one E-box Remote/E-box Remote Basic is 40 but Calummas XS have to be operated in the Pass-through mode, it means that max. 32 Calummas XS can be connected in one string.
• Max. number of Calummas XS connected to the E-box Remote/E-box Remote Basic also depends on cable length.

E-box Remote

E-box Remote Basic

Cable length is a total cable length on both LED outputs.
Example:

Total cable length=L1+L2+L3+L4+L5+L6+L7+L8+L9

Power On/Off

Note: This type of connection is available for single chip (SC) versions only – pure white or single colour. Non dimmable.
LEDs Input voltage: 48V

Calumma XS Power On/Off connection

• CE version
  Colours of wires apply to the 5-cored cable UL 20969 5x 20AWG (P/N 13053481). Connector| Vcc| D+| D-| 0V|
  ---|---|---|---|---|---
  Function| LEDs +| Not connected| Not connected| LEDs –| Not connected
  Colour of wire| Red| –| –| Black| –
• US version
  ** Connector| Vcc| D+| D-| 0V| **
  ---|---|---|---|---|---
  Function| LEDs +| Not connected| Not connected| LEDs –| Ground
  Colour of wire| Red| –| –| Black| Yellow/Green

Colours of wires apply to the 5-cored cable UL 20969 5x 20AWG (P/N 13053481).

Installation

Mounting the fixture

• The Calumma can be fastened in any orientation on a flat, non-flammable surface by means of mounting yoke (2).

• The LED module (4) can be tilted +180°/-180°. Use an Allen key 2.5 for adjusting a LED module position.
  Ensure that the structure to which you are attaching the fixture is secure.

Connection to power

The unit must be installed by a qualified electrician in accordance with all national and local electrical and construction codes and regulations.

Junction box installation

• Junction box with one output

• Junction box with four outputs

1. Unscrew the four screws (1) from the cover (2) on the junction box to get access to the DPS with terminal blocks (3) and two mounting holes (4).
2. Screw the junction box on a non-flammable flat surface.
3. Connect cables to terminal blocks.
  * Two cable glands M20 x 1.5 serves for a power/data cable. One (or four) cable gland M12 x 1.5 serves for Calumma XS connection cable.
  * Remove the end cap from the cable gland before passing the cable.
  * We recommend to apply an adequate layer of the paste LOCTITE 5331 on the plastic holder of the cable gland before inserting it into the body of the gland.

• **Cable gland M20x1.5 and M12x1.5

**

  * Wiring of connection blocks on DPS RB4232 in the junction box with one LED output.

  * Wiring of connection blocks on DPS RB4233 in the junction box with four LED outputs.

Fuse F1-F4: 2A/500V AC.

• Calumma XS connection (CE):
  ** Connector| Vcc| D+| D-| 0V|
  ---|---|---|---|---|---
  Function| LEDs +| Data +| Data –| LEDs –| Not connected
  Colour of wire**| Red| Orange| White| Black| –

Colours of wires apply to the 5-cored cable UL 20969 5x 20AWG (P/N 13053481)

• Calumma XS connection (US):
  Connector| Vcc| D+| D-| 0V|
  ---|---|---|---|---|---
  Function| LEDs +| Data +| Data –| LEDs –| Ground
  Colour of wire| Red| Orange| White| Black| Yellow/Green

Colours of wires apply to the 5-cored cable UL 20969 5x 20AWG (P/N 13053481)

• Connection between junction box and E-box Remote and among junction boxes (CE):
  Connector| Vcc| D+| D-| 0V|
  ---|---|---|---|---|---
  Function| LEDs +| Data +| Data –| LEDs –| Not connected
  Colour of wire| Red| Orange| White| Black| –

Colours of wires apply to the 5-cored cable SJTW 5x 14AWG (P/N 1305 3336).

• Connection between junction box and E-box Remote and among junction boxes (US):
  Connector| Vcc| D+| D-| 0V|
  ---|---|---|---|---|---
  Function| LEDs +| Data +| Data –| LEDs –| Ground
  Colour of wire| Red| Orange| White| Black| Yellow/Green

Colours of wires apply to the 5-cored cable SJTW 5x 14AWG (P/N 1305 3336).
NOTE: Each DMX line of Calummas XS connected to the LED output of the E-box Remote has to be terminated at the last fixture. Connect a 120 Ohm resistor between terminals D+ and D- in the last junction box.
Example:

Screw the cover (2) back on the junction box.

Example of Control panel in RDM manager
The software RDM manager is available on the ROBE website (https://www.robe.cz/support), product RUNIT WTX.

Manufacturer PIDs

• LED calibration 4byte HEX! (RGBW/RGBA) – the item shows 4 bytes of calibration values for calibrated white colours of RGBW(RGBA) Calumma. E.g.

• CTC channel has to be set to some calibrated white colour (21 DMX-1800K, 66 DMX-2700K,

• 91 DMX-3200K, 141 DMX-4200K, 211 DMX-5600K, 255 DMX-6500K) otherwise the item shows values “ff ff ff ff” (and calibration values cannot be saved to the Calumma).
  Warning!
  Changing and saving values in this item will effect calibrated white colour(s) of the Calumma .

• Insect friendly light – the item effects RGBA Calumma only. If the item is on, blue colour is not used in calibrated white colours. This modification of white lights results in a smaller attraction of white light for insects (mosquitos, moths..). The function is also available from DMX chart (channel Special Function, range 7-10 DMX).

• WiFi unlink – the item is inactive for Calumma XS.

• Terminator active – the item inactive for Calumma XS

Software update

• Software update of Calumma XS modules has to be done by means of the software ROBE Uploader running on PC. The ROBE Uploader is a software for automatized software update of ROBE fixtures. The ROBE Uploader switches Calummas XS to the update mode automatically.
  Please see https://www.robe.cz/robe-uploader/ for more information.
  Note: CalummaXS modules in ON/OFF connection cannot be updated.

• The Calummas XS have to be operated in the Pass-Through mode only.

• To update Calummas XS including the E-box Remote.

  1. Update connected LED modules by means of the file Calumma.lib in the ROBE Uploader.
  2. Set the E-box Remote to the Standard mode and switch it off/on. Use the file EminereEbox.lib in the ROBE Uploader for software update of the E-box Remote.
  3. After updating the E-box Remote, set the E-box Remote to the Pass-Through mode and switch it off/on.
     For more information about updating please see the E-box Remote user manual and E-box Remote Base user manual.

Examples of connection for software update

1. By means of DMX connection and Robe Universal Interface.

2. By means of the Ethernet connection

Technical specifications

• Power supply

  • Input voltage: 48 V
  • Power consumption:
  • Calumma XS MC : 10 W
  • Calumma XS SC: 10 W

• Optic

  • Light source:
  • Calumma XS MC: one high power multichip LEDs
  • Calumma XS SC: 4 x high power single chip LED
  • Colour variants Calumma XS MC: RGBW (W – 6500 K), RGBA, PW (W – 3000 K)
  • Colour variants Calumma XS SC: PW (W – 3000 K)
  • Beam Angle Calumma XS MC:
  • Symetrical: 9°,12°, 15°, 25°, 30°, 45°, 65°, 100°
  • Bi-symetrical: 10° x 30°, 30° x 10°, 10° x 60°, 60° x 10°, 15° x 45°, 45° x 15°, 15°x90°, 90°x15°, 30°x60°, 60°x30°, 30°x90°, 90°x30°
  • Beam Angle Calumma XS SC:
  • Symetrical: 10°, 15°, 25°, 30°, 45°, 65°, 100°
  • Bi-symetrical: 10° x 30°, 30° x 10°, 10° x 60°, 60° x 10°, 15° x 45°, 45° x 15°, 15°x90°, 90°x15°, 30°x60°, 60°x30°, 30°x90°, 90°x30°
  • Projected Lumen Maintenance: L90B10 >90.000 hrs, Ta = 25°C / 77°F

• Compatible drivers

  • E-box Remote
  • E-box Remote Basic

• Mounting method

  • Via yoke
  • Adjustability: -180°/+180°

• Housing

  • High pressure die-cast aluminium body
  • Tempered glass

• Cooling system Convection

• Total heat dissipation

  • Calumma XS MC: 25 BTU/h (calculated)
  • Calumma XS SC: 25 BTU/h (calculated)

• Protection factor

  • CE: IP 67 (IP 66 junction box)
  • US: Suitable for wet location

• Impact rating IK10

• Operating ambient temperature range -20°C /+40°C (-4°F /+104°F)

• Connection

  • Via E-box Remote/E-box Remote Basic
    Calumma IN: cable UL 20969 5x 20AWG (P/N 13053481), length 1m standard Interconnecting cable between junction boxes: SJTW 5x 14AWG (P/N 13053336) Junction Box for Calumma XS, (1x Output) Junction Box for Calumma XS, (4x Output)

• Connection On/Off

  • Calumma IN: cable UL 20969 5x 20AWG black (P/N 13053481), length 1m standard Interconnecting cable between junction boxes: SJTW 5x 14AWG (P/N 13053336) Junction Box for Calumma XS, (1x Output) Junction Box for Calumma XS, (4x Output)

• Weight

  • Calumma XS MC : 0.59 kg (1.3 lbs)
  • Calumma XS SC : 0.6 kg (1.3 lbs)

• **Dimensions (All dimensions in mm [inch])

**

  *  **Junction box with one output

**

  *  **Junction box with four outputs

**

• Included items
  • 1 x Calumma XS MC / Calumma XS SC
  • 1 x User manual
• Optional accessories
  • Top Hat Calumma XS RAL9011 (P/N 10980732)
  • Half Top Hat Calumma XS RAL9011 (P/N 10980736)
  • Tenon Adaptor for Calumma XS
  • Pole Mount Bracket for Calumma XS
  • Junction Box for Calumma XS, 1x Output, Ral 9011 (P/N 10980715)
  • Junction Box for Calumma XS, 4x Output, Ral 9011 (P/N 10980716)

Cleaning and maintenance

DANGER !
Disconnect from the mains before starting any maintenance or cleaning work

• Rinse off loose dirt with low pressure water spray. Wash the housing with a soft brush or sponge and a mild, nonabrasive washing detergent. Rinse it.
• Maintenance and service operations are only to be carried out by a qualified person.
• Should you need any spare parts, please use ROBE OEM parts.

Disposing of the product
To preserve the environment please dispose or recycle this product at the end of its life according to the local regulations and codes.

ChangeLog

This section summarizes changes in the user manual.

instructins

DMX protocol for Calumma – All sizes – MC and SC

Version: 1.3 (16 modes in total)|  |  |
---|---|---|---
Mode/Channels in all| Mode 1- RGBW(A)-8bit, Mode 2- RGB 8-bit, Mode 3- full RGBW(A)|
1| 2| 3| 4| 5| 6| 7| 8-10| Mode 4- White-full control, Mode 5- Reduced RGBW(A)|
4| 3| 12| 3| 6| 8| 15| Reserved| Mode 6- Reduced RGBW(A)+white control, Mode 7- Full control|
 |  |  |  |  |  |  |  | Mode 7-Full RGBW(A)+virt. Colour wheel|
 |  |  |  |  |  |  |  | RGBW/RGBA/RGB modes|
Mode/channels|

DMX Value

| Function|

Type of control

1| 2| 3| 4| 5| 6| 7
–| –| –| –| –| –| 1|  | Special functions|
 |  |  |  |  |  |  | 0| No function| step
 |  |  |  |  |  |  |  | To activate following functions , stop in DMX value for at least 3 sec.|
 |  |  |  |  |  |  | 1-2| Save current DMX values to fixture as initial DMX values.| step
 |  |  |  |  |  |  | 3-4| Show saved initial DMX values| step
 |  |  |  |  |  |  | 5-6| Run factory demo sequences at switching fixture on (without DMX)| step
 |  |  |  |  |  |  | 7-8| Insect friendly light On (RGBA version only)| step
 |  |  |  |  |  |  | 9-10| Insect friendly light Off (RGBA version only)| step
 |  |  |  |  |  |  | 11-255| Reserved|
1| 1| 1| –| 1| 1| 2|  | Red|
 |  |  |  |  |  |  | 0 – 255| Red LEDs saturation control (0-100%)| proportional
–| –| 2| –| –| –| 3|  | Red Fine|
 |  |  |  |  |  |  | 0 – 255| Red LEDs saturation control fine| proportional
2| 2| 3| –| 2| 2| 4|  | Green|
 |  |  |  |  |  |  | 0 – 255| Green LEDs saturation control (0-100%)| proportional
–| –| 4| –| –| –| 5|  | Green Fine|
 |  |  |  |  |  |  | 0 – 255| Green LEDs saturation control fine| proportional
3| 3| 5| –| 3| 3| 6|  | Blue|
 |  |  |  |  |  |  | 0 – 255| Blue LEDs saturation control (0-100%)| proportional
–| –| 6| –| –| –| 7|  | Blue Fine|
 |  |  |  |  |  |  | 0 – 255| Blue LEDs saturation control fine| proportional
4| –| 7| –| 4| 4| 8|  | White (Amber)|
 |  |  |  |  |  |  | 0 – 255| White LEDs saturation control (0-100%)| proportional
–| –| 8| –| –| –| 9|  | White (Amber) Fine|
 |  |  |  |  |  |  | 0 – 255| White LEDs saturation control fine| proportional
–| –| 9| 1| –| 5| 10|  | Green correction|
 |  |  |  |  |  |  | 0| Uncorrected white| step
 |  |  |  |  |  |  | 1-127| Minus green – uncorrected white| proportional
 |  |  |  |  |  |  | 128| Uncorrected white (128=default)| step
 |  |  |  |  |  |  | 129-255| Uncorrected white – Plus green| proportional
–| –| 10| 2| –| 6| 11|  | Colour temperature correction (CTC)|
 |  |  |  |  |  |  | 0| No function| step
 |  |  |  |  |  |  | 1 – 10| Tungsten dimming 2700 K| step
 |  |  |  |  |  |  | 11 – 20| Tungsten dimming 3200 K| step
 |  |  |  |  |  |  | 21-255| Colour temperature changing from 1800 K –> 6500 K| proportional
 |  |  |  |  |  |  |  | (21-1800K, 66-2700K, 91-3200K,141-4200K, 211-5600K, 255-

6500K)

|
–| –| –| –| –| –| 12|  | Virtual Colour Wheel|
 |  |  |  |  |  |  | 0| No function| step
Mode/channels|

DMX Value

| Function|

Type of control

---|---|---|---
1| 2| 3| 4| 5| 6| 7
 |  |  |  |  |  |  | 1-2| White 1800 K| step
 |  |  |  |  |  |  | 3-4| White 2700 K| step
 |  |  |  |  |  |  | 5-6| White 3200 K| step
 |  |  |  |  |  |  | 7-8| White 4200 K| step
 |  |  |  |  |  |  | 9-10| White 5600 K| step
 |  |  |  |  |  |  | 11-12| White 6500 K| step
 |  |  |  |  |  |  | 13| Blue (Blue=full, Red+Green+White/Amber=0)| step
 |  |  |  |  |  |  | 14-23| Red=0, Green->up,Blue =full, White/Amber=0| proportional
 |  |  |  |  |  |  | 24| Cyan (Red=0, Green=full, Blue =full, White/Amber=0)| step
 |  |  |  |  |  |  | 25-34| Red=0, Green=full, Blue->down, White/Amber=0| proportional
 |  |  |  |  |  |  | 35| Green (Red=0, Green=full, Blue =0, White/Amber=0)| step
 |  |  |  |  |  |  | 36-45| Red->up, Green=full, Blue=0, White/Amber=0| proportional
 |  |  |  |  |  |  | 46| Yellow (Red=full, Green=full, Blue=0, White/Amber=0)| step
 |  |  |  |  |  |  | 47-56| Red=full, Green->down, Blue=0, White/Amber=0| proportional
 |  |  |  |  |  |  | 57| Red(Red=full, Green=0, Blue=0, White/Amber=0)| step
 |  |  |  |  |  |  | 58-67| Red=full, Green=0, Blue->up, White/Amber=0| proportional
 |  |  |  |  |  |  | 68| Magenta (Red=full, Green=0, Blue=full, White/Amber=0)| step
 |  |  |  |  |  |  | 69-78| Red -> down, Green=0, Blue=full, White/Amber=0| proportional
 |  |  |  |  |  |  | 79| Blue (Red=0, Green=0, Blue=full, White/Amber=0)| step
 |  |  |  |  |  |  |  | Transition effects|
 |  |  |  |  |  |  | 80-87| Rainbow effect (with fade time) from slow-> fast| proportional
 |  |  |  |  |  |  | 88-95| Rainbow effect (without fade time) from slow-> fast| proportional
 |  |  |  |  |  |  | 96-103| Full dynamic white (1800K->6500K->1800K) (with fade time)

from slow-> fast

| proportional
 |  |  |  |  |  |  | 104-111| Full dynamic white (1800K->6500K->1800K) (without fade time)

from slow-> fast

| proportional
 |  |  |  |  |  |  | 112-119| Dynamic warm white (1800K-3000K-1800K) (with fade time)

from slow-> fast

| proportional
 |  |  |  |  |  |  | 120-127| Dynamic warm white (1800K-3000K-1800K) (without fade time)

from slow-> fast

| proportional
 |  |  |  |  |  |  | 128-135| Rainbow effect + full dynamic white (with fade time) from slow-

fast

| proportional
 |  |  |  |  |  |  | 136-143| Rainbow effect + full dynamic white (without fade time) from

slow-> fast

| proportional
 |  |  |  |  |  |  | 144-151| Blue/Green effect (with fade time) from slow-> fast| proportional
 |  |  |  |  |  |  | 152-159| Blue/Green effect (without fade time) from slow-> fast| proportional
 |  |  |  |  |  |  | 160-167| Red/Blue effect (with fade time) from slow-> fast| proportional
 |  |  |  |  |  |  | 168-175| Red/Blue effect (without fade time) from slow-> fast| proportional
 |  |  |  |  |  |  | 176-183| Green/Red effect (with fade time) from slow-> fast| proportional
 |  |  |  |  |  |  | 184-191| Green/Red effect (without fade time) from slow-> fast| proportional
 |  |  |  |  |  |  | 192-199| Blue/4000K effect (with fade time) from slow-> fast| proportional
 |  |  |  |  |  |  | 200-207| Blue/4000K effect (without fade time) from slow-> fast| proportional
 |  |  |  |  |  |  | 208-215| Green/4000K effect (with fade time) from slow-> fast| proportional
 |  |  |  |  |  |  | 216-223| Green/4000K effect (without fade time) from slow-> fast| proportional
 |  |  |  |  |  |  | 224-231| Red/4000K effect (with fade time) from slow-> fast| proportional
 |  |  |  |  |  |  | 232-239| Red/4000K effect (without fade time) from slow-> fast| proportional
 |  |  |  |  |  | 13|  | Shutter/Strobe|
 |  |  |  |  |  |  | 0-31| Shutter closed| step
 |  |  |  |  |  |  | 32-63| Shutter open| step
 |  |  |  |  |  |  | 64-95| Strobe-effect from slow to fast| proportional
Mode/channels|

DMX Value

| Function|

Type of control

---|---|---|---
1| 2| 3| 4| 5| 6| 7
 |  |  |  |  |  |  | 96-127| Shutter open| step
 |  |  |  |  |  |  | 128-143| Opening pulse in sequences from slow to fast| proportional
 |  |  |  |  |  |  | 144-159| Closing pulse in sequences from fast to slow| proportional
 |  |  |  |  |  |  | 160-191| Shutter open| step
 |  |  |  |  |  |  | 192-223| Random strobe-effect from slow to fast| proportional
 |  |  |  |  |  |  | 224-255| Shutter open| step
–| –| 11| 3| 5| 7| 14|  | Dimmer|
 |  |  |  |  |  |  | 0 – 255| Light intensity coarse (0-100%)| proportional
–| –| 12| –| 6| 8| 15|  | Dimmer Fine|
 |  |  |  |  |  |  | 0 – 255| Light intensity fine| proportional
 |  |  |  |  |  |  |  |  |
Copyright © 2022-2024 Robe Lighting s.r.o. – All rights reserved|
All Specifications subject to change without notice|

DMX protocol for Calumma – All sizes – MC and SC

Version: 1.3 (16 modes in total)|  |  |
---|---|---|---
Mode/Channels in all| TW Modes: Mode 11- White selection + Dimmer, Mode 12- WW + CW|
11| 12| 13| 14-16| PW Mode: Mode 13- Dimmer|
3| 4| 2| Reserved|  |
 |  |  |  | TW and PW modes|
Mode/channels| DMX

Value

| Function|

Type of control

11| 12| 13
1| –| –|  | White colour selection|
 |  |  | 0 – 255| White from 2700 K – 6500 K| proportional
–| 1| –|  | Warm White|
 |  |  | 0 – 255| Warm White LEDs saturation control (0-100%)| proportional
–| 2| –|  | Cool White|
 |  |  | 0 – 255| Cool White LEDs saturation control (0-100%)| proportional
2| 3| 1|  | Dimmer|
 |  |  | 0 – 255| Light intensity coarse (0 – 100%)| proportional
3| 4| 2|  | Dimmer Fine|
 |  |  | 0 – 255| Light intensity fine| proportional
 |  |  |  |  |
Copyright © 2022-2024 Robe Lighting s.r.o. – All rights reserved|
All Specifications subject to change without notice|
 |  |  |  |  |

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>