BLAUPUNKT GTS655MPRO 4 Way Slim Coaxial Speaker Instruction Manual
- June 1, 2024
- Blaupunkt
Table of Contents
BLAUPUNKT GTS655MPRO 4 Way Slim Coaxial Speaker
Product Information
- Specifications:
- Models: GTS655MPRO, GTS692MPRO
- Type: Slim Line
- Manufacturer: BP Americas Corp.
- Address: 9590 NW 40th St. Road, Doral, FL 33178
- Website: www.blaupunkt.com.
- Compliance: FCC Part 15
- Warning: Cancer and Reproductive Harm – www.P65Warnings.ca.gov.
Product Usage Instructions
- Installation:
- Follow the installation guide provided in the user manual to correctly set up the GTS655MPRO or GTS692MPRO Slim Line models.
- Powering On:
- Ensure the device is connected to a power source and press the power button to turn it on.
- Functionality:
- Explore the different features and functions of the device using the control panel or remote control.
- Maintenance:
- Regularly clean the device with a soft, dry cloth to prevent dust accumulation and maintain performance.
- Troubleshooting:
- If you encounter any issues with the device, refer to the troubleshooting section of the user manual for solutions.
FAQs
- Q: How can I obtain technical support for my GTS655MPRO/GTS692MPRO?
- A: You can contact our customer support team at [insert contact details] for assistance with technical queries.
- Q: Is the GTS655MPRO/GTS692MPRO compatible with external devices?
- A: Yes, the device supports connectivity with external devices such as smartphones and tablets via Bluetooth or AUX input.
- Q: What should I do if the device displays an error message?
- A: Try resetting the device by unplugging it from the power source for a few minutes and then plugging it back in. If the issue persists, refer to the user manual for further instructions.
Introduction
Dear Customer,
- Congratulations on your purchase of a BLAUPUNKT speaker, we are devoted to making our musical reproduction the very best, and we are pleased you have chosen our product.
- Through years of engineering expertise, hand craftsmanship, and critical testing procedures, we have created a wide range of products that reproduce music with all the clarity and richness you deserve.
- For maximum performance, we recommend you have your BLAUPUNKT product installed by an authorized BLAUPUNKT dealer, as they know, and have skills that will maximize the performance of your speaker.
- Please read this manual, and keep your receipt, and original carton for possible future use.
- If after reading this manual, you still have questions regarding your product, we recommend that you see your nearest BLAUPUNKT dealer,
WARNING
- Continuous, excessive exposure to sound pressure levels over 85dB can cause hearing loss.
- While BLAUPUNKT sound systems are capable of producing sound pressure levels greater than 85dB, they are also designed for enjoyment at reasonable levels.
- Please observe all local sound ordinances while listening to your BLAUPUNKT sound system. Need we say more? Use common sense.
Dimension
Model: GTS655M
Model: GTS692M 
Features
- High-Quality Polypropylene Cone
- Foam Surround
- High-Temperature Aluminium Voice Coil
- Ceramic Magnet
- Mylar Dome Tweeter
Specifications
Mounting
- NOTE: BLAUPUNKT strongly recommends that you operate your system at low volume levels before the completed installation of your BLAUPUNKT series speakers. This will allow for a test of the subwoofers before permanently securing it to a location.
- CAUTION: Make sure that all of the speaker’s wiring is fully protected from cuts, tears and possible wear. Any short circuits created from cuts, tears or wear could severely damage the source unit or amplifier. Make sure all speaker wires easily reach the speaker terminal with no stress on the wire or connectors.
- IMPORTANT: Never cut any metal that is an integral part of the vehicle’s safety or structural support system. Again, if you are unsure, it is best to have the speakers professionally installed. It could be a lot less expensive in the long run. Never sacrifice your safety for sound.
- CHOOSING A LOCATION: It is always best to plan the complete installation before attempting to install any product. The routing of wires, power connections and mounting locations should be planned first. As with any car stereo installation, all work performance should be checked thoroughly and carefully before the operation of the system.
- The placement of your BLAUPUNKT speakers within your vehicle will greatly affect the overall performance of your audio system. Every model of car is different, so installation into particular locations of the vehicle may not be possible without modifications. Factory-provided locations are usually.
- BLAUPUNKT speakers are designed to fit in almost any factory location. Again, if at all possible, it is recommended that you use a factory location. This applies mostly to later-model cars. For those earlier models that do not have factory locations or are limited to just the front speakers, it is recommended that you choose a location with a sufficient amount of air space.
- If you allow an insufficient amount of air space, the speaker may not produce low frequencies very well. It is recommended to mount the speaker in the door panels, kick panels, rear decks, etc. Ideally, the speakers should be mounted where it will be in an enclosed airspace. This will allow for extended bass response.
Troubleshooting
If you start having problems with distorted sound or loss performance after installing your subs, you can follow the instructions below to try and locate what is causing the problem.
- If you have any distorted sound, loss of performance, or rattling from your subs, check the connections running from your amplifier or other processors to the box. You will also want to check the connections inside the box to make sure no wires have become unhooked or are loose.
- If the above does not solve the problem, check your enclosure thoroughly to see if there are any leaks, cracks, or broken pieces. Any loss of structural integrity of your enclosure can cause significant performance loss and distortion.
- The next step you can take is to remove the subs and look for any burned wire leads or separated components. You can normally smell something burning when a sub blows or is going bad. Sometimes when you play subs to hard for too long, they will start to heat up.
- If none of the above steps solve the problem, you will want to start looking at the other components in the vehicle. Start by checking all connections to and from the box, amplifier, source unit, or any other processors you may be using. You will need to reference to that particular manufacturer for any setting configurations or troubleshooting.
Warning:
- Investigate the layout of your automobile thoroughly before drilling or cutting any holes. Take care when you work near the gas tanks, gas lines, hydraulic lines, and electrical wiring. Attach the system securely to the automobile to prevent damage, particularly in the event of an accident.
- Do not mount the system so that the wire connections are unprotected or are subject to pinching or damage from nearby objects.
- The +12V DC power wire must be fused at the battery-positive terminal connection. Before making or breaking power connections at the system power terminals, disconnect the +12V wire at the battery end.
- Confirm your radio/head unit or other equipment is turned off while connecting the input jacks and subwoofer terminals.
- If you need to replace the power fuse, replace it only with a fuse identical to that supplied with the system. Using a fuse of a different type or rating may result in damage to this system.
CONTACT
- BP Americas Corp.
- 9590 NW 40th St. Road
- Doral, FL 33178
- www.blaupunkt.com.
BLAUPUNKT. All Rights Reserved. This device complies with part 15 of the FCC Rules.
Operation is subject to the following two conditions:
- this device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation.
WARNING: Cancer and Reproductive Harm – www.P65Warnings.ca.gov.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>