Raymarine AXIOM 2 PRO 9S Hybrid Touch Multifunction Display Instruction Manual
- June 1, 2024
- Raymarine
Table of Contents
Raymarine AXIOM 2 PRO 9S Hybrid Touch Multifunction Display
Product Specifications:
- Product Name: Mounting Template
- Language: English (EN)
- Recommended Software: Adobe Acrobat Reader
Product Usage Instructions
Printing Instructions:
Caution: Ensure the mounting template is printed true-to-scale.
Before modifying the mounting surface, ensure the actual printed template matches the measurements provided in the template document.
- Open the mounting template document in Adobe Acrobat Reader.
- Select File → Properties.
- Make a note of the Page Size.
- Select File → Print to open the print dialog.
- Select Properties.
- Ensure the paper size is set to the same dimensions as the page size noted in Step 3.
- Click OK to return to the print settings dialog.
- Ensure Size Options and Page Scaling options are set to Actual Size or None.
- Ensure Auto-Rotate and Center or Auto portrait/landscape option is NOT selected.
- Select the orientation (portrait or landscape) that matches the template document orientation.
Note: Most templates are landscape-oriented. See page 3 of the template for reference.
Frequently Asked Questions
- Q: Why is it important to print the mounting template true-to-scale?
- A: Printing the template true-to-scale ensures accurate measurements for mounting, preventing errors during installation.
- Q: What should I do if the printed template does not match the measurements provided?
- A: If the printed template does not match, do not proceed with modifications to the mounting surface. Recheck your printing settings and ensure they match the recommended settings provided in the user manual.
Mounting template printing instructions
Caution: Ensure the mounting template is printed true-to-scale
Before modifying the mounting surface, ensure actual printed template matches
the measurements provided in the template document
Adobe Acrobat must be configured correctly to ensure mounting templates print true-to-scale. With the mounting template document open in Acrobat Reader:
- Select File→Properties.
- Make a note of the Page Size.
- Select File→Print. The print dialog is displayed.
- Select Properties.
- Ensure the paper size is set to the same dimensions as the page size identified in Step 1.
- Click OK to return to the print settings dialogue.
- Ensure “Size Options” and “Page Scaling” options (as appropriate) are set to “Actual Size” or “None”.
- Ensure the “Auto-Rotate and Center” or “Auto portrait / landscape” option (as appropriate) is NOT ticked.
- Select the relevant orientation to match the template document orientation (“portrait” or “landscape”; most templates are landscape).
Surface Mounting Template
Axiom 2 Pro 9” Flush / Surface Mounting Template
STATED DIMENSIONS REFLECT ACTUAL PRODUCT SIZE AND DO NOT INCLUDE ANY CLEARANCE ALLOWANCES
Before drilling or cutting any holes in your vessel, ensure that you read the detailed Installation instructions provided with your product, as well as the guidance provided below:
- Always select a drill bit type (for holes) or saw type (for cutouts) which is suitable for the mounting surface material and thickness.
- For products supplied with self-tapping screws, drill one pilot hole only and then use one of the provided screws to test the mounting surface. Ensure that when the screw is fully inserted, it is tight and secure and does not move in any direction. Once confident that you have selected a suitable drill bit size and type, drill the remaining pilot holes.
- For products supplied with bolts, drill one pilot hole only and then select a suitable drill bit size for the mounting surface material and thickness. If in doubt, use a smaller drill bit size than is indicated by the mounting hole or bolt size. Drill out the pilot hole in one position only, then use one of the provided bolts to test the mounting surface. Ensure that when the bolt is fully inserted, it is tight and secure and does not move in any direction. Once you are confident that you have selected a suitable drill bit size and type, drill the remaining holes.
- Always use any supplied washers or other additional fixing hardware supplied with the product.
- Do NOT overtighten screws or bolts.