delta RS5103 Foldable Bicycle Wall Mount Hanger Instruction Manual
- June 1, 2024
- Delta
Table of Contents
delta RS5103 Foldable Bicycle Wall Mount Hanger
Product Information
Specifications
- Product Name: Two Bike Wall Mount Rack w/shelf
- Model: RS5103
- Maximum Total Weight Limit: 65 lbs (30 Kgs)
- Manufacturer: Delta Cycle Corporation
- Manufacturer Contact: 800-474-6615
FAQ
- Q: What should I do if I encounter difficulties during assembly?
- A: For assistance, please contact our customer service at 1-800-474-6615 or email us at service@designbydelta.com.
- Q: Can I exceed the weight limit specified for the product?
- A: No, it is crucial not to exceed the maximum weight limit of 65 lbs (30 Kgs) to prevent any accidents or injuries.
Two Bike Wall Mount Rack w/shelf
Assembly instructions: RS5103
Parts
- A. x1 — Rack Shelf
- B. x1 — Shelf Support
- C. x1 — Wall Bracket
- D. x3 — Screws
Tool(s) Required
- Phillips Head
- Screwdriver
WARNING
- NEVER EXCEED MAXIMUM TOTAL WEIGHT LIMIT OF 65 LBS (30 Kgs) INCORRECT WALL MOUNTING COULD RESULT IN ITEMS FALLING AND INJURY TO PERSONS.
- IMPROPER INSTALLATION OR USE CAN RESULT IN PERSONAL INJURY AND/OR DAMAGE TO PROPERTY
Installation Instructions
- Locate stud beneath wallboard.
- Position wall bracket at deisred height.
- Before mouting wall bracket position rack shelf behind upper part of bracket. (Figure 1)
- Make sure the rack shelf is level when mounting.
- Once in correct position screw into place.
- (screws should be in the center or Wall Stud)
- IMPORTANT: SAFETY NOTE
- Beware of drilling into electrical wire or pipes within wall!
- Beware of drilling into electrical wire or pipes within wall!
- Compress shelf support slightly and release into holes on shelf. (Figure 2)
- Make sure that shelf support is securely placed in bottom of wall bracket. (Figure 3)
Single bike horizontal wall mount rack
Assembly instructions: RS5701W
- Locate stud beneath wallboard.
- Mark position on wall at desired height.
- Assemble front plate and arms against back plate to a secure fit.
- Mount securely to wall. (screws should be in center of wall stud)
- IMPORTANT SAFETY NOTE
- Beware of drilling into electrical wire or pipes within wall!
WARNING
- Do not exceed maximum total weight limit of 22kg/50lbs.
- Incorrect wall mounting could result in items falling and injury to persons.
- Avoid mounting in a position where personal injury could result from walking into protruding rack.
MAKE LIFE EASY: READ AND FOLLOW ALL INSTRUCTIONS
- Locate stud beneath wallboard.
- Position shelf at desired height and screw into place. (screws should be in center of wall stud)
- NOTE: make sure the shelf is level when mounting.
- Slide cables into mounts on main frame and shelf.
- WARNING: Make sure cables are fully seated before using shelves.
- WARNING: Make sure cables are fully seated before using shelves.
- WARNING: Max. Weight 50 lbs. (22.5 KG)
Single Bike Wall Mount Pole Rack
Assembly instructions: RS6300
Parts
- x1 — Bar
- x2 — Padded Arms
- x1 — Accessory Hook
- x2 — Wall Screws
Tools Required
- Hand Drill 1/8″(3mm)
Installation instructions
- Identify where wooden stud lies within wall, drill pilot holes for wood screws.
- Position bar at desired height and screw into place.
- IMPORTANT SAFETY NOTE
- Make sure the bar is level when mounting.
- Attach padded arms.
- Place first hook behind bar sideways, then pull towards you and twist up.
- Push down to lock into place. (FIGURE 1)
- Hook accessory hook to bottom bar for additional storage (FIGURE 2)
WARNING
- Do not exceed maximum total weight limit of 18kg/40lbs.
- To avoid injury, Do not overload.
Contact
Delta Cycle Corporation
- 36 York Avenue, Randolph, MA 02368 USA
- 800-474-6615
- www.designbydelta.com
© Copyright 2021
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>