WOLFX NFB01A105-1A Front Bumper User Manual
- June 1, 2024
- WolfX
Table of Contents
WOLFX NFB01A105-1A Front Bumper User Manual
※Thank you for purchasing the FRONT BUMPER. Please read this manual carefully and keep it properly if you need to refer to it afterward. If you need any support or assistance, please contact us with your product model number and order number, and our support team will help you solve problems.
※ This product is designed primarily to enhance the appearance of the vehicle.
Do not rely in any way on the components of this product to protect against
injury or death in the event of an accident. To reduce the risk of serious
injury or property damage, please read all safety messages and understand all
instructions and procedure notices before attempting to install or use this
product.
※ Properly torque and recheck fasteners and security of step tread after 250 miles and inspect frequently. Do not use if damaged.
REQUIRED TOOLS
Socket
| Ratchet
| Wrench
| Allen Wrench
| Safety Glasses
Parts Information
|
NO.
| Parts Name| Size| Line Graph| Qty|
Color
---|---|---|---|---|---|---
®| 1A|
Bumper
| /| 
| 1|
Black
1B
©| /|
Bull Bar Barkect
| /| 
| 1|
Black
0| /|
License Prlate
Hokle
| /| | 1|
Black
0 .| Bo,
‘
| Half Head Allen Bolts|
M6x20
| | 3| Dacro Black
©| N09|
Hex Flange
Nuts
|
M6
| | 3| Dacro Black
0| W13|
Flat Washer
| 06x18x1| | 3| Dacro Black
®| B43|
Square Neck
Bolt
| M10x35| | 7| Blue Zinc
Plating
0| W33|
Flat Washer
| 010)(25)0| | 7| Blue Zinc
Plating
C)| W32|
Spring Washer
| 010| | 7| Blue Zinc
Plating
(t)| N26|
Hex Nuts
| M10| | 7| Blue Zinc
Plating
©| W21|
Plastic Plate
| M10| | 7| Blue Zinc
Plating
(rt)| B12| Half Head Allen Bolts| M8x16| | 17| Dacro Black
42)| NU|
Hex Flange
Nuts
| M8| | 17| Dacro Black
®| Bila
‘
| Half Head Allen Bolts| M6x40| | 5| Dacro Black
(4| N11|
Lock Nuts
| M6| | 5| Dacro Black
※ Note: spare parts such as B07、N09、W13、B43、W33、W32、N26、
W21、B12、N14、B46 and N11 are provided with 1PCS each (included in the number of
parts details).
Installation Instructions
※Note: This installation manual takes one of the models as an example.
Step 1: Open the carton and take out the parts. Check whether the number
of components is complete.
Step 2: Remove the original bumper and prepare the parts needed to
install the bumper.
Step 3: Install the Radar Probe.
Note： If the car does not have a radar probe, this step can be ignored.
Step 4: Splicing the Bumper.
Note: There are two options for the front bumper installation, choose one
according to your personal preference.
④ B07 Half Head Allen Bolts M6x20 2
⑧| W33| Flat Washer| Φ10x25x2
| 7
---|---|---|---|---
⑨| W32| Spring Washer| Φ10
| 7
10| N26| Hex Nuts| M10
| 7
11| W21| Plastic Plate| M10| 7
Option 1.
Option 2.
※Note: Please keep the Bull
Bar Barkect properly.
The Bull Bar is equipped with a Barkect. In case you need to install an Bull
Bar.
Step 5 : Install the Bumper.
The Front Bumper is installed.
Option 1.
Option 2.
Documents / Resources
|
WOLFX NFB01A105-1A Front
Bumper
[pdf] User Manual
NFB01A105-1A, NFB01A105-1A Front Bumper, Front Bumper, Bumper
---|---