WolfX NFB01C105 Running Boards 4 Doors Side Steps User Manual
- June 1, 2024
- WolfX
Table of Contents
WolfX NFB01C105 Running Boards 4 Doors Side Steps
Product Information
Specifications
- Model: NFB01C105
- Material: Q235A
- Product Dimensions: 65.7 x 9 x 5 inch
- Package Dimensions: 69.5 x 10.4 x 7.3 inch
- Product Weight: 57.3 lbs
Product Usage Instructions
Required Tools
- Socket
- Ratchet
- Safety Glasses
Parts Information
| NO. | Parts Name | Size | Qty | Color |
|---|---|---|---|---|
| 1 | Side Step L/R | Line Graph | 1 | Black |
Installation Instructions
- Step 1: Open the carton and take out the parts. Check whether the number of components is complete.
- Step 2: Install the bracket.
- Step 3: Splicing the Bumper.
Frequently Asked Questions (FAQ)
Q: What should I do if I encounter missing parts during installation?
A: In case of missing parts, please contact customer support for assistance
and replacement.
SIDE STEP
User Manual
2021-2023 Ford Bronco (not Bronco Sport)
| Model: | NFB01C105 |
|---|---|
| Material: | Q235A |
| Product Dimensions: | 65.7 x 9 x 5 inch |
| Package Dimensions: | 69.5x 10.4 x 7.3 inch |
| Product Weight: | 57.3 lbs |
Thank you for purchasing the SIDE STEP. Please read this manual carefully and keep it properly if you need to refer to it afterward. If you need any support or assistance, please contact us with your product model number and order number, and our support team will help you solve problems.
WARNING
This product is designed primarily to enhance the appearance of the vehicle. Do not rely in any way on the components of this product to protect against injury or death in the event of an accident. To reduce the risk of serious injury or proper-ty damage, please read all safety messages and understand all instructions and procedure notices before attempting to install or use this product.
CAUTION
Properly torque and recheck fasteners and security of step tread after 250
miles and inspect frequently. Do not use if damaged.
Parts Information
Note:
spare parts such as Half socket set bolts、N09、W19、W16、N22 are provided with
1PCS each (included in the number of parts details).
Installation Instructions
Note: This installation manual takes a single side as a sample, please repeat the steps for the other side.
-
Step 1: Open the carton and take out the parts. Check whether the number of components is complete.
-
Step 2: Install the bracket.
-
Step 3: Splicing the Bumper.
-
Step 4: Adjust the balance of the Side Step and the car side, and tighten the corresponding bolts.
-
Step 5 : Adjust the balance of the pedal to the ground and tighten the corresponding bolts.
Tips: Use a stretch ruler to measure and balance the left and right sides of the pedal. Please ensure that the pedal has the same distance to the ground on both sides. -
Step 6 : Installation of a Side Step is complete. Please do periodic inspections of the Side Step to make sure that all hardware is secure and tight.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>