WolfX WJ2025-0706 Full LED F150 Tail Lights User Manual
- June 1, 2024
- WolfX
Table of Contents
WolfX WJ2025-0706 Full LED F150 Tail Lights
Product Information
Specifications
- Model: WJ2025-0706
- Compatible with: 2009-2014 Ford F-150 Styleside Model Only
Product Usage Instructions
Installation Steps
- Ensure you have the following tools ready for installation:
- 2pcs Bolts
- Pull the taillight outward from the vehicle.
- Disconnect all the plugs of the original taillight.
- Grab either one of the black connectors or the white connectors on the truck and plug them into the corresponding connectors of the new taillight.
- Ensure that the black wire on the connector of the new taillight matches the black wire on the connector of the truck as they are negative electrodes.
- Push the taillight back into the truck.
- Securely put the two bolts back in place.
- Repeat steps 2 to 7 for the other side of the vehicle.
FAQ
Q: Can this taillight model be used on other vehicle models?
A: No, this specific taillight model is designed for use only with 2009-2014 Ford F-150 Styleside models.
Q: Do I need any special tools for installation?
A: You will require 2pcs of bolts for the installation process.
Model.: WJ2025-0706 2009-2014 Ford F-150 Styleside Model Only
REQUIRED TOOLS
Installation Instructions
- Pull the taillight outward
- Disconnect all the plugs of the original
- Grab either one of the black connectors and white connectors on the truck and plug them in the connector of the new taillight.
- Please notice, that the black wire on the connector of the new taillight should correspond to the black wire on the connector of the truck. Because they are negative electrodes.
- Push the taillight back into the truck
- Put your two bolts back in
- Repeat the steps 2~10 for the other side.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>