WolfX WJ10-0594 Headlights User Manual
- June 17, 2024
- WolfX
Table of Contents
WolfX WJ10-0594 Headlights
Product Information
Specifications:
- Model: WJ10-0594
- Compatibility: 2017-2019 Ford F-250/F-350/F-450/F-550 Super Duty (Halogen Headlight Model Only)
- Not Fit for Factory LED Headlight Models
REQUIRED TOOLS
Product Usage Instructions
Installation Instructions:
- Remove the radiator support cover using the provided removal tool.
- Push down to release the four clips holding the front grille in place.
- Remove the front grille by unscrewing and removing the specified bolts (bottom, center, top).
- Disconnect the four factory plugs (Side Marker, Low Beam, Turn Signal, High Beam).
- Transfer all factory bulbs & sockets to the new headlight, except for the Turn Signal.
- Connect all the factory harness plugs to the new headlight.
- Reinstall the specified bolts in their respective locations.
- Repeat steps 6-14 for the other side of the vehicle.
- Reinstall any original removed parts and accessories.
Adjustment Steps
- Use a Phillips Head Screwdriver for adjustments.
- Locate the adjustment screw on the headlight housing.
- Turn the screw clockwise to adjust the headlight beam upwards, and counterclockwise to adjust downwards.
- Repeat the same adjustment steps for the other side of the vehicle.
FAQs
Q: Can these headlights be used on a vehicle with factory LED headlight models?
A: No, these headlights are specifically designed for Halogen Headlight Models and are not compatible with Factory LED Headlight Models.
Q: What tools are required for installation?
A: The tools required for installation include a ratchet, 10mm socket, flathead screwdriver, and a removal tool.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>