WolfX F-150 Front Bumper Bull Bar User Manual
- May 15, 2024
- WolfX
Table of Contents
WolfX F-150 Front Bumper Bull Bar
Thank you for purchasing the FRONT BUMPER BULL BAR. Please read this manual carefully and keep it properly if you need to refer to it afterward. If you need any support or assistance, please contact us with your product model number and order number, and our support team will help you solve problems.
WARNING
This product is designed primarily to enhance the appearance of the vehicle.
Do not rely in any way on the components of this product to protect against
injury or death in the event of an accident. To reduce the risk of serious
injury or property damage, please read all safety messages and understand all
instructions and procedure notices before attempting to install or use this
product.
CAUTION : Properly torque and recheck fasteners and security of step tread after 250 miles and inspect frequently. Do not use if damaged.
Product Features
- Model: NF101A105-3A
- Material: Q235A
- Product Dimensions: 48.3 x 7.6 x 7.6 inch
- Package Dimensions: 5.5 x 5.9 x 33.5 inch
- Product Weight: 8.8 lbs
REQUIRED TOOLS
Parts Information
Note : spare parts such as B22 and N14 are provided with 1PCS each (included in the number of parts details).
Installation Instructions
- Step 1 : Open the carton and take out the parts. Check whether the number of components is complete.
- Step 2 : Splicing the Bumper
- Step 3: Install the Bull Bar.
The Bull Bar is installed. NOTE : This design only fits for NF101A105-1A & 2A.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>