VIXEN AIR VXT4100AB Ports Suspension Train Horn Aluminum Air Tank Installation Guide

VIXEN AIR VXT4100AB Ports Suspension Train Horn Aluminum Air Tank

Product Information

Specifications

• Product Model: VXT4100AB
• Capacity: 4 Gallon
• Material: Aluminum
• Color: Black
• Maximum Working Pressure: 200 PSI
• Port Thread Size: NPT

Product Usage Instructions

• Installation Guide
  Before beginning your installation, read through the instruction guide. Professional installation is recommended.

• Safety Instructions
  Install all fittings and accessories in the tank before pressurizing. Use thread sealant on fitting’s threads and tighten with a wrench.

• Planning Your Installation
  Determine component spots before starting. Confirm proper length of airline and wire.

• Mounting
  Find a suitable mounting location in your vehicle. Ensure ports are accessible before drilling holes. Use provided hardware to secure the tank. Do not mount on flexible material.

• Braided Hose Installation
  Connect the compressor’s stainless steel braided hose to the tank’s inlet port.

• Maintenance
  Regularly inspect, clean, and tighten electrical and fitting connections. Tighten mounting screws as needed. Drain weekly to prevent condensation buildup.

Solutions to Common Issues

• Issue: Loss of pressure in tank.
  • Solution 1: Tighten drain cock.
  • Solution 2: Check air and check valves for damage.
  • Solution 3: Use soap and water solution on connections and tank, tighten or repair leaks.
• Issue: Excessive moisture in horn or safety valve.
  • Solution 1: Depressurize and drain the tank.
  • Solution 2: Relocate compressor to a drier location.

Frequently Asked Questions (FAQ)

Q: Is professional installation required for this product?
A: Professional installation is recommended for safety reasons.

VXT4100AB INSTALLATION GUIDE

BEFORE BEGINNING YOUR INSTALLATION

Read through the instruction guide before getting started with the installation. Professional installation is recommended for this product.

CONTENTS

• 4 Gallon Aluminum Air Tank (Black)
• Mounting Hardware

Over pressuring the tank beyond the specified maximum working pressure (200 PSI) may result in death or serious injury.

SAFETY INSTRUCTIONS

• Install all fittings and accessories in the tank before pressurizing the tank.
• Before assembly, use thread sealant on all fitting’s threads, then use a wrench to tighten each part. IMPORTANT: Do not over tighten.
• Tank must be drain frequently.
• We recommend always to install a drain and safety valves in the tank.
• Always depressurize the tank before servicing or adding accessories.
• Do not use this tank as a breathing device.
• Be sure to pump nothing other than atmospheric air.
• It is important to determine the maximum air pressure for any tool or attachment before using it.
• Make sure your battery ground is detached before you begin the installation.
• Employ equipment for eye protection during drilling operations.

PLANNING YOUR INSTALLATION

• Before beginning the installation, determine each component’s spot.
• Confirm you have the proper length of airline and wire.

MOUNTING

• Find a convenient mounting location in your vehicle for the air tank. Ensure ports are reachable before drilling any holes.
• Mark the location of holes using the mounting bracket of the air tank as a template, and then drill to size.
• Using mounting hardware provided, secure the air tank. IMPORTANT: Do not mount on a flexible material.

BRAIDED HOSE INSTALLATION

Connect the stainless steel braided hose of your compressor to the tank’s inlet port.

PORT LOCATIONS AND THREAD SIZE (NPT)

MAINTENANCE’

• Make sure that electrical and fitting connections are regularly inspected, cleaned and tightened when needed.
• Make sure mounting screws are regularly tightened if needed.
• Drain weekly, to avoid excessive buildup of condensation.

SOLUTIONS TO COMMON ISSUES

• Issue: Loss of pressure of tank.
  • Solution 1: Tighten drain cock.
  • Solution 2: Examine air and check valves and replace if damaged or leaking.
  • Solution 3: Use soap and water solution on air connections and tank, and tighten connections or repair leaks where needed.
• Issue: Excessive moisture in horn or safety valve (if installed).
  • Solution 1: Depressurize and drain the tank.
  • Solution 2: Relocate the compressor to a drier location.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>