TKO 720LC Unilateral Plate Loaded Leg Curl Instruction Manual

TKO 720LC Unilateral Plate Loaded Leg Curl

Product Information

Specifications

• Model: 720LC
• Maximum Weight Limit: 200KG / 440 lbs
• Manufacturer: TKO Strength
• Website: www.tkostrength.com

Product Usage Instructions

Safety Precautions
Before using the Standing Leg Curl equipment, please ensure you follow these safety precautions:

1. Read the owner’s manual carefully before assembling or using the equipment.
2. Consult your personal physician before starting any exercise program.
3. Rest adequately between workouts to allow muscles to tone and develop.
4. Avoid allowing small children to use the machine without adult supervision.

Assembly Instructions

Assembly Step 1
Items Needed:

• Base Frame
• Right Upright Frame
• Left Upright Frame
• Main Frame
• Flat Washers (8)

Note : Hand tighten bolts and nylon lock nuts during assembly.

Assembly Step 2
Items Needed:

• Left Upright Frame
• Main Frame
• Left Arm Frame
• Elbow Pad Frame
• Weight Horns
• Arm Pivot Axle
• Aluminum Caps (2)
• Outer Safety Cover Assembly
• Bumper
• Plug
• Ball Bearings (2)
• Snap Spring (2)
• Socket Set Screws M8*10 (2)

Note : Hand tighten bolts and nylon lock nuts during assembly.

Assembly Step 3
Items Needed:

• Main Frame
• Left Arm Frame
• Knee Pad Frame (2)
• Elbow Pad Frame
• Aluminum Ring (25)
• Aluminum Cap
• Elbow Pad
• Leg Pad
• Knee Pad
• Foam
• Plugs (3)
• Socket Head Cap Screws M8*30 (7)

Frequently Asked Questions (FAQ)

• Q: What is the maximum weight limit for the Standing Leg Curl model 720LC?
  A: The maximum weight limit is 200KG / 440 lbs.

• Q: Can small children use this equipment?
  A: It is not recommended for small children to use the machine unless under adult supervision.

• Q: How can I contact customer service for assistance?
  A: You can contact customer service at 866-856-3488 or 713-895-9270 during Monday-Friday, from 8:30am to 4:30pm CT, or via email at sales@tkostrength.com.

Owner’s Manual
V 1.0 – 06.2023

www.tkostrength.com

Safety

Read this owner’s manual carefully before assembling or using TKO equipment.

WARNING: Serious injury could occur if these safety precautions are not observed

Safety Precautions

• Before beginning any exercise program, consult your personal physician. Evaluate appropriate for your particular age and condition.
• If you experience any pain or tightness in your chest, irregular heartbeats, shortness or breath, faintness or other unusal discomfort while exercising, stop and consult your physician before continuing.
• Make sure that the equipment(s) are set up and operated on a solid level surface. DO NOT install or use the equipment on an uneven surface.
• Exercise equipment has moving parts. In the interest of safety, keep others, especially children, at a safe distance while exercising.
• Make sure there are enough room for access and operate the equipment(s) safely. inspect and maintain the equipment(s) regularly.
• Replace the worn or damaged parts / components immediately to ensure safety. Use a spotter.
• Back support cushion may drop when knob is pulled. Hold the back support cushion when adjusting it.
• Make sure the pull pin is fully engaged before use.
• Lower the back support cushion to the lowest position when not in use.
• Warm up 5 to 10 minutes before each workout and cool down 5 to 10 minutes afterward. Never hold your breath while exercising.
• Remove all jewelry, including rings, chains and pins before commencing exercise. Always wear suitable clothing and footwear during exercise. DO NOT wear loose machine.
• Rest adequately between workouts. Muscles tone and develop during these rest periods.
• Most exercise equipment is not recommended for small children. Children should not use the machine unless they are under adult supervision.

If you have any question or need assistance please contact us at, Customer Service: 866-856-3488 or 713-895-9270 e mail: sales@tkostrength.com
Hours: Monday-Friday 8:30am to 4:30pm CT

© Copyright 2017, TKO Strength & Performance Inc. All rights reserved. TKO Strength & Performance Inc. 6387 Windfern Road, Houston, TX 77040 Phone + 713-895-9270 Fax + 713-934-8495
www.tkostrength.com

Product Diagram

Maximum Weight Limit: 200KG / 440 lbs.

Instructions

Before beginning assembly please take the time to read instructions thoroughly. Please use the various lists in this manual to make sure that all parts have been included in your shipment. When ordering, use part number and description from the lists. Use only our replacement part when servicing. Failure to do so will void your warranty and could result in personal injury.
The equipment is designed to provide the smoothest, most effective exercise motion possible. After assembly, you should check all functions to ensure correct operation. If you experience problems, first recheck the assembly instructions to locate any possible errors made during assembly. If you are unable to correct the problem, call your authorized dealer. Be sure to have your serial number and this manual when calling. When all parts have been accounted for, continue on.

Tools Required

Exploded Diagram

Parts List

NOTE: SOME OF THESE PARTS MAY COME PRE-INSTALLED

ITEM NO.| DESCRIPTION| QTY| ITEM NO.| DESCRIPTION| QTY
---|---|---|---|---|---
1| Base Frame| 1| 25| Outer Sa y Cover Assembly| 2
2| Right Upright Frame| 1| 26| Adjustable Foot| 1
3| Le Upright Frame| 1| 27| Bumper| 2
4| Main Frame| 1| 28| Plug PT60 120| 4
5| Right Arm Frame| 1| 29| Grip| 2
6| Le Arm Frame| 1| 30| | 2
7| Knee Pad Frame| 1| 31| Plug RT50 100| 3
8| Elbow Pad Frame| 1| 32| Ball Bearing| 4
9| Weight Horns| 2| 33| Socket Head Cap Screw M12 30| 20
10| Arm Pivot Axle| 2| 34| Socket Head Cap Screw M8 30| 13
11| Limit Sha| 2| 35| Socket Head Cap Screw M10 30| 4
12| Aluminum Cap| 3| 36| Flat Washer| 20
13| Aluminum Cap φ76| 4| 37| Flat Washer| 13
14| Aluminum Spacer Ring| 3| 38| Flat Washer| 4
15| Aluminum Ring Φ25| 4| 39| Flat Head Cap Screw M12 30|
16| Aluminum Cap| 6| 40| Flat Head Cap Screw M10 25| 6
17| Elbow Pad| 1| 41| Flat Head Cap Screw M6 16| 3
18| Leg Pad| 1| 42| Flat Head Cap Screw M6 30| 4
19| Knee Pad| 1| 43| Nut| 8
20| Foam| 2| 44| Socket Set Screw M5 3| 6
21| Grip| 3| 45| Phillip Screw         60| 8
22| Bumper| 2| 46| Snap Spring| 2
23| Plug| 3| 47| | 2
24| Rubber Foot| 3| 4| Socket Set Screw M8|

Measurement Guide

Assembly Instruction

Assembly of the equipment takes professional installers about 2 hours. If this is the first time you have assembled this type of equipment, plan to spend more time. It is strongly recommended to assemble the equipment by professional installers. You may find it quicker, safer, easier to assemble this equipment with the help of a friend, as some of components may be large, heavy or awkward to handle alone. It is important that you assemble your product in a clean, clear, uncluttered area. This will enable you to move around the product while you are fitting components and reduce the possibility of injury during assembly.

NOTE As with any assembled part, proper alignment and adjustment is critical. While tightening the fasteners, be sure to leave room for adjustments. Do not fully tighten the fasteners until instructed to do so. Be careful to assemble the components in the sequence presented in this guide.

Assembly

STEP 1

Note：Hand Tighten Bolts and Nylon Lock Nuts.

STEP 2

Note： Hand Tighten Bolts and Nylon Lock Nuts.

STEP 3

Note： Hand Tighten Bolts and Nylon Lock Nuts.

Maintenance Schedule

ROUTINE| COMMERCIAL MAINTENANCE| HOME MAINTENANCE| LATEST DATE ENTRY
---|---|---|---
Inspect;

Links, Pull Pins, Snap Locks, Swivels, Weight Stack Pins

| DAILY| WEEKLY|  |  |  |  |  |  |
Clean; Upholstery| DAILY| WEEKLY|  |  |  |  |  |  |
Inspect;

Cables or Belts and their tension

| DAILY| WEEKLY|  |  |  |  |  |  |
**** Inspect;

Accessory Bars, and Handles

| WEEKLY| 3 MONTHS|  |  |  |  |  |  |
Inspect; All Decals| WEEKLY| **** 3 MONTHS|  |  |  |  |  |  |
Inspect;

All Nuts and Bolts, Tighten if needed

| WEEKLY| 3 MONTHS|  |  |  |  |  |  |
**** Inspect;

Anti-Skid Surface

| WEEKLY| 3 MONTHS|  |  |  |  |  |  |
Clean & Lubricate;

Guide Rods with a Teflon (PTFE) based lubricant (Superlube)

| MONTHLY| 3 MONTHS|  |  |  |  |  |  |
Lubricate;

Seat Sleeves, Turcite Bushings, Linear Bearing

| MONTHLY| 3 MONTHS|  |  |  |  |  |  |
Clean and  Wax; All Glossy Finishes| 6 MONTHS| YEARLY|  |  | |  |  |  |
Repack with Grease; Linear Bearings| 6 MONTHS| YEARLY|  |  | |  |  |  |
Replace; Cables, Belts and Connecting Parts| YEARLY| 3 YEARS|  | |  |  |  |  |

Your equipment comes with a commercial maintenance decal. For personal, in home use, please follow the home maintenance schedule listed above.

General Maintenance Information

Lines, al pieceior signs of iSolks aro dema, Weight Stack Pins:

• Check springs in snap hooks and pull-pins for proper tension and alignment.
• If the spring sticks or has lost its rigidity, replace it immediately.

Upholstery:

• To ensure prolonged upholstery life and proper hygiene, all upholstered pads should be wiped down with a damp cloth after every workout.
• Periodically take the time to use a mild soap or an approved vinyl upholstery cleaner to deter the onset of cracking or drying. Avoid using any abrasive cleaners or cleaners not intended for use on vinyl.
• Replace ripped or warn upholstery immediately.
• Keep sharp or pointed objects clear of all upholstery.

Decals:

• Inspect and familiarize yourself with any safety warnings or other user information posted on each decal.

Nuts and Bolts:

• Inspect all nuts and bolts for any loosening and tighten if needed.
• Go through a re-tightening sequence periodically to ensure that all hardware is tensioned proper.

Anti-Skid Surfaces:

• These surfaces are designed to supply secure footing and need to be replaced if they appear worn or become slippery.

Belts and Cables:

• We uses only high quality belt, and mil-spec cables.
• Visually inspect the belts and cables for fraying, cracking, peeling or discoloration.
• While the machine is not in use, carefully run your fingers along the belt or cable to feel for thinning or bulging areas.
• Replace belts and cables immediately at the first signs of damage or wear. Do not use equipment until belts or cables have been replaced.

Belt and Cable Tension:

• Referring to the Owners Manual, when belts or cables are used check all bolts attachments to be sure they are properly attached.
• Check slack in cables and re-adjust cable tension if needed.

Seat Sleeves, Guide Rods:

• Wipe down adjusting tubes with a dust free rag before applying lubricant.
• Lubricate seat sleeves and Guide Rods with a Silicon or Teflon based lubricant spray.

Linear Bearings:

• Referring to the Owners Manual carefully disassemble the bearing from its housing and place a finger full of light grease (lithium, super lube, etc.) into the inside of the bearing. Using your finger, press the grease into the ball-bearings and their tracks. repeat until the ball-bearing tracks are full of grease. Insert the shaft back into the bearing and wipe off excess grease.

PLEASE KEEP THIS FOR YOUR RECORDS

Documents / Resources

| TKO 720LC Unilateral Plate Loaded Leg Curl [pdf] Instruction Manual
720LC Unilateral Plate Loaded Leg Curl, 720LC, Unilateral Plate Loaded Leg Curl, Plate Loaded Leg Curl, Loaded Leg Curl, Leg Curl
---|---

References

• TKO Strength & Performance

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>