ASUS ROG Strix Scope RX TKL Wireless Keyboard User Guide

: June 9, 2024
: Asus

Table of Contents

Package Contents
Keyboard features
Connecting your gaming keyboard
Updating the firmware and customization
Battery Status
Key combinations
Switching between different paired host devices
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

ROG Strix Scope RX TKL Wireless Keyboard
User Guide

Package Contents

ASUS ROG Strix Scope RX TKL Wireless Keyboard

The illustration is for reference only Actual vary with models, such as keyboard layout.
** We recommend using the wireless don le extender when using the board in 2.4GHz mode.
*** Only use the wireless dongle extender for the wireless dongle.

Keyboard features

Top view (US layout for reference)

ASUS ROG Strix Scope RX TKL Wireless Keyboard - Figure
1

RGB indicator
Caps Lock indicator
Scroll Lock indicator
Function Lock indicator
Win lock indicator
Kickstand
Magnetic dongle storage
Power switch
USB Type-C® port
Magnetic wrist rest

Connecting your gaming keyboard

Using the bundled cable
Connect the bundled USB Type-C® to Type-A cable to your gaming keyboard and a USB port on your computer
Pairing Bluetooth mode for the first time
Set the connection switch to the Bluetooth mode

Using RF wireless mode

Connect the USB dongle to a USB port on your computer.
Set the connection switch to the RF 2.4G Wireless mode.

Pairing Bluetooth mode to additional host devices (max. 3)

Set the connection switch to the Bluetooth mode.
Press and hold the FN + 7 for 3 seconds until the RGB indicator on your gaming keyboard starts to blink blue.
Once your gaming keyboard has been successfully paired, the RGB indicator on your gaming keyboard will light up blue for 3 seconds.

Updating the firmware and customization

Connect your gaming keyboard using the bundled cable and the USB dongle to USB ports on your computer.
Download and install the Armoury Crate software from https://rog.asus.com.
Follow the software instructions to update your gaming keyboard firmware.
Customize your gaming keyboard using Armoury Crate.

Battery Status

The RGB indicator on your gaming keyboard will turn red (blinking) and the LEDs for all the other keys will switch off when the battery power is below 20% in wireless mode. You may charge your gaming keyboard by using the bundled USB cable.
NOTE: When charging the wireless gaming keyboard, the power output may vary according to the USB port you connect your gaming keyboard to.

Key combinations

NOTE: When running AURA SYNC, the hot key related with the lighting effect will be disabled, for example: Profile switch, Lighting effects switch, Brightness level.

Switching between different paired host devices

Hot Key	Function	Lighting effect color
Fn + 8/9/0	BLE paired device 1 (default) / 2 /3	8/9/0 key will remain lit up

in white

Safety Guidelines
Keep the device away from liquid, humidity, or moisture. Operate the device only within the specific temperature range of 0°C(32°F) to 40°C(104°F). When the device exceeds the maximum temperature, unplug or switch off the device to let it cool down.

Notices
Limitation of Liability
Circumstances may arise where because of a default on ASUS’ part or other liability, you are entitled to recover damages from ASUS. In each such instance, regardless of the basis on which you are entitled to claim damages from ASUS, ASUS is liable for no more than damages for bodily injury (including death) and damage to real property and tangible personal property; or any other actual and direct damages resulted from omission or failure of performing legal duties under this Warranty Statement, up to the listed contract price of each product.
ASUS will only be responsible for or indemnify you for loss, damages or claims based in contract, tort or infringement under this Warranty Statement.
This limit also applies to ASUS’ suppliers and its reseller. It is the maximum for which ASUS, its suppliers, and your reseller are collectively responsible.
UNDER NO CIRCUMSTANCES IS ASUS LIABLE FOR ANY OF THE FOLLOWING: (1) THIRD- PARTY CLAIMS AGAINST YOU FOR DAMAGES; (2) LOSS OF, OR DAMAGE TO, YOUR RECORDS OR DATA; OR (3) SPECIAL, INCIDENTAL, OR INDIRECT DAMAGES OR FOR ANY ECONOMIC CONSEQUENTIAL DAMAGES (INCLUDING LOST PROFITS OR SAVINGS), EVEN IF ASUS, ITS SUPPLIERS OR YOUR RESELLER IS INFORMED OF THEIR POSSIBILITY.

RF exposure warning
The equipment complies with FCC RF exposure limits set forth for an uncontrolled environment.
The equipment must not be co-located or operating in conjunction with any other antenna or transmitter.

Federal Communications Commission Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

This device may not cause harmful interference.
This device must accept any interference received including interference that may cause undesired operation.

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with manufacturer’s instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.

CAUTION! The use of shielded cables for connection of the monitor to the graphics card is required to assure compliance with FCC regulations. Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment.

Compliance Statement of Innovation, Science and Economic Development Canada (ISED)
This device complies with Innovation, Science and Economic Development Canada licence exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device.
CAN ICES-003(B)/NMB-003(B)

Radio Frequency (RF) Exposure Information
The radiated output power of the Wireless Device is below the Innovation, Science and Economic Development Canada (ISED) radio frequency exposure limits. The Wireless Device should be used in such a manner such that the potential for human contact during normal operation is minimized.
This device has been evaluated for and shown compliant with the ISED Specific Absorption Rate (“SAR”) limits when operated in portable exposure conditions.

REACH
Complying with the REACH (Registration, Evaluation, Authorisation, and Restriction of Chemicals) regulatory framework, we published the chemical substances in our products at ASUS REACH website at http://csr.asus.com/english/REACH.htm.

ASUS Recycling/Takeback Services
ASUS recycling and takeback programs come from our commitment to the highest standards for protecting our environment. We believe in providing solutions for you to be able to responsibly recycle our products, batteries, other components as well as the packaging materials. Please go to http://csr.asus.com/english/Takeback.htm for detailed recycling information in different regions.

Proper disposal
DO NOT throw the device in municipal waste. This product has been designed to enable proper reuse of parts and recycling. The symbol of the crossed out wheeled bin indicates that the product (electrical, electronic equipment and mercury-containing button cell battery) should not be placed in municipal waste. Check local regulations for disposal of electronic products.
DO NOT throw the device in fire. DO NOT short circuit the contacts.
DO NOT disassemble the device.

Lithium-Ion Battery Warning
CAUTION: Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type recommended by the manufacturer. Dispose of used batteries according to the manufacturer’s instructions.

Regional notice for Singapore
This ASUS product complies with IMDA Standards.
Complies with
IMDA Standards
DB103778

Simplified UKCA Declaration of Conformity:
ASUSTek Computer Inc. hereby declares that this device is in compliance with the essential requirements and other relevant provisions of The Radio Equipment Regulations 2017 (S.I. 2017/1206). Full text of UKCA declaration of conformity is available at https://www.asus.com/support/.

Function	Frequency	Maximum Output Power (EIRP)
2.4GHz wireless	(2403 – 2480MHz) – Keyboard	10dBm
(2403 – 2480 MHz) – Dongle	6dBm
BLE	(2403 – 2480MHz) – Keyboard	9dBm

CE Mark Warning

ASUSTek Computer Inc. hereby declares that this device is in compliance with the essential requirements and other relevant provisions of Directive 2014/53/EU. Full text of EU declaration of conformity is available at https://www.asus.com/support/.

Service and Support
Visit our multi-language website at https://www.asus.com/support/.

https://www.asus.com/support/

Manufacturer
ASUSTek COMPUTER INC.
Address, City
1F., No. 15, Lide Rd., Beitou Dist., Taipei City 112
Address
Harkortstrasse 21-23, 40880 Ratingen
Country
Germany
Authorized Representative in United Kingdom
ASUSTEK (UK) LIMITED
Address
1st Floor, Sackville House, 143-149 Fenchurch Street, London, EC3M 6BL, England
Country
United Kingdom