GVISION POE32MD-AU-400G Power of Ethernet Monitor User Manual

GVISION POE32MD-AU-400G Power of Ethernet Monitor

Product Specifications

• Model: POE32MD-AU-400G
• Manufacturer: GVISION USA, INC
• Power Input: AC 125-240V
• Resolution: 1920 x 1080
• Screen Size: 32

Product Usage Instructions

Important Safety Information
It is crucial to follow these safety precautions to ensure safe usage of the monitor:

• Avoid exposing the monitor to rain or moisture.
• Do not use the plug with an extension cord receptacle unless prongs can be fully inserted.
• Do not open the cabinet as there are high voltage components inside.
• Unplug the power cord before cleaning the monitor.

Care and Cleaning
Follow these steps for proper care and cleaning of the monitor:

• Always unplug the monitor before cleaning.
• Use a lint-free, non-abrasive cloth to clean the LCD monitor surface.
• Avoid using liquid, aerosol, or glass cleaners on the monitor.

Safety Precautions and Maintenance
Additional safety precautions and maintenance tips:

• Do not use the monitor near water.
• Clean only with a dry cloth.
• Ensure ventilation openings are not blocked.
• Avoid placing the monitor near heat sources.
• Do not push objects or spill liquid into the monitor.

Frequently Asked Questions (FAQ)

1. Q: What should I do if I encounter issues with my monitor?
   A: If you experience any problems with your monitor, please contact GVISION USA, INC at Tel. 949-586-3338 or email info@gvision-usa.com for assistance.

2. Q: Can I use any power cord with the monitor?
   A: It is recommended to use the power cord provided with the display. If not supplied, contact GVISION for the appropriate power cord matching your power socket.

3. Q: How should I clean the monitor?
   A: Unplug the monitor before cleaning. Use a lint-free, non-abrasive cloth to clean the LCD surface. Avoid using any liquid cleaners.

GVISION USA, INC
30398 Esperanza, Rancho Santa Margarita CA 92688 / 949.586.3338 / info @gvision-usa.com

Important Information

WARNING
TO PREVENT FIRE OR SHOCK HAZARDS, DO NOT EXPOSE THIS UNIT TO RAIN OR MOISTURE. ALSO, DO NOT USE THIS UNIT’S POLARIZED PLUG WITH AN EXTENSION CORD RECEPTACLE OR OTHER OUTLETS UNLESS THE PRONGS CAN BE FULLY INSERTED. REFRAIN FROM OPENING THE CABINET AS THERE ARE HIGH VOLTAGE COMPONENTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

CAUTION
TO REDUCE THE RISK OF ELECTRIC SHOCK, MAKE SURE POWER CORD IS UNPLUGGED FROM WALL SOCKET. TO FULLY DISENGAGE THE POWER TO THE UNIT, PLEASE DISCONNECT THE POWER CORD FROM THE AC OUTLET. DO NOT REMOVE COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
This symbol warns user that uninsulated voltage within the unit may have sufficient magnitude to cause electric shock. Therefore, it is dangerous to make any kind of contact with any part inside this unit.
This symbol alerts the user that important literature concerning the operation and maintenance of this unit has been included. Therefore, it should be read carefully in order to avoid any problems.

CAUTION: Please use the power cord provided with this display in accordance with the table below. If a power cord is not supplied with this equipment, please contact GVISION. For all other cases, please use the power cord with the plug style that matches the power socket where the monitor is located. The compatible power cord corresponds to the AC voltage of the power outlet and has been approved by, and complies with, the safety standards in the country of purchase.
*When operating this monitor with its AC 125-240V power supply, use a power supply cord that matches the power supply voltage of the AC power outlet being used.

Care and Cleaning

• Always unplug your monitor from the wall outlet before cleaning. Clean the LCD monitor surface with a lint-free, non-abrasive cloth. Avoid using any liquid, aerosol or glass cleaners.
• Slots and openings on the back or top of the cabinet are for ventilation. They must not be blocked or covered. Your monitor should never be placed near or over a radiator or heat source, or in a built-in installation unless proper ventilation is provided.
• Never push objects or spill liquid of any kind into this product.

Safety Precautions / Maintenance

• Do not use this apparatus near water.
• Clean only with dry cloth.
• Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.
• Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.
• Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.
• Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.
• Only use attachments/accessories specified by the manufacturer.
• Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the monitor combination to avoid injury from tip-over.
• Unplug monitor during lightning storms or when unused for long periods of time.
• Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the monitor has been exposed to rain or moisture, does not operate normally, or has been dropped.
• Do not press strongly upon the panel with a hand or a sharp object such as a nail, pencil, or pen, or make a scratch on it.
• Do not stick metal objects or any other conductive material into the power cord. Do not touch the end of the power cord while it is plugged in.
• Keep the packing anti-moisture material or vinyl packing out of the reach of children. Anti-moisture material is harmful if swallowed. If swallowed, induce vomiting and go to the nearest hospital. Additionally, vinyl packing can cause suffocation. Keep it out of the reach of children.
• Concerning the Power Cord (Can differ by country): Check the specification page of this owner’s manual to be certain concerning current requirements. Do not connect too many devices to the same AC power outlet as this could result in fire or electric shock. Do not overload wall outlets. Overloaded wall outlets, loose or damaged wall outlets, extension cords, frayed power cords, or damaged or cracked wire insulation are dangerous. Any of these conditions could result in electric shock or fire. Periodically examine the cord of your device, and if its appearance indicates damage or deterioration, unplug it, discontinue use of the device, and have the cord replaced with an exact replacement part by an authorized servicer. Protect the power cord from physical or mechanical abuse, such as being twisted, kinked, pinched, closed in a door, or walked upon. Pay particular attention to plugs, wall outlets, and the point where the cord exits the device. Do not move the monitor with the power cord plugged in. Do not use a damaged or loose power cord. Be sure do grasp the plug when unplugging the power cord. Do not pull on the power cord to unplug the monitor.
• To reduce the risk of fire or electrical shock, do not expose this product to rain, moisture or other liquids. Do not touch the screen with wet hands. Do not install this product near flammable objects such as gasoline or candles, or expose the TV to direct air conditioning.
• Do not use high voltage electrical equipment near the TV (e.g., a bug zapper). This may result in product malfunction.
• Do not expose to dripping or splashing and do not place objects filled with liquids, such as vases, cups, etc. on or over the apparatus (e.g., on shelves above the unit).
• Do not attempt to modify this product in any way without written authorization from GVISION. Unauthorized modification could void the user’s authority to operate this product.
• Moving: Make sure the product is turned off, unplugged, and all cables have been removed.
• If you smell smoke or other odors coming from the screen, unplug the power cord and contact an authorized service center.
• If water or another substance enters the product (like an AC adapter, power cord, or unit), disconnect the power cord and contact the service center immediately. Otherwise, this may result in fire or electric shock.

Accessories
Please check the following listed accessories before installation

PACKAGE OF CONTENTS

LCD Monitor| x1| Remote Control| x1
User’s Manual| x1| HDMI Cable| x1
Power Cord| x1|

Installation

Interface

This section describes the I/O ports of the monitor.

Supports maximum resolution up to 1080p@30fps.Supported memory card capacity: Up to 32GB.Supported file types: AVI/MPG/MPEG/XVID/VOB/DAT/MP4/TS/M2TS/MKV/H.264/RM/ RMVB
RJ45| Power Consumption: Less than 35W
Minimum PoE Required: PoE++ (802.3bt Type 3) 60W
BNC In/Out| BNC In Supports following Analog HD signals. TVI/CVI/AHD/CVBS BNC Out acts as a loop out of the Input signal from BNC In.
VGA| Connect device with a VGA output 15 pin D-sub cable
AC| Power input:  AC 110V ~ 240V, 50/60Hz

Control & Functions

If you cannot locate your remote, you can use the side panel buttons of your monitor to operate the monitor’s features. (* Depends on the types or models, the OSD button may not available)

__

MENU

| Brings up the MONITOR Main menu. When in the OSD, press MENU button to return to the previous menu or exit
+| Turn on the volume. In the MONITOR menu system, function like the right arrow button on the remote control and adjusts menu controls.
–| Turn down the volume. In the MONITOR menu system, function like the left arrow button on the remote control and adjust menu controls

How to Use Buttons
Use the buttons to on the monitor to use it’s functions.

press ＋ button select, press ‘SOURCE’ to enter the video mode
3| Press MENU button then press ＋／－ button move highlight icon left / right.
4| Press SOURCE button to enter the sub-menu，then press ＋／－button correspondingly to change the setting
5| When the setting is done, press MENU button to return to the previous menu or exit

Remote Control

Motion Control

**| Turn on or off the monitor
Mute| Turn on or off sound
Lock| OSD menu lock and unlock
Menu| Display the main menu
▲| Select Up
▼| Select Down
◄| Volume Down/ Select Left
►| Volume Up/ Select Right
Info| Display information
Exit| Exit the Monitor OSD
Source| Source selection menu
Special Controls| Media Controls
---|---
▲| Select Up| ◄◄| Rewind
▼| Select Down| ►►| Forward
◄| Select Left| ▲| Fast Rewind Speed / Up
►| Select Right| ▼| Fast Forward Speed / Down
MENU| OSD| ◄| Volume Down / Select Left
Source| Open Source Menu| ►| Volume Up / Select Right
Exit| Exit| **| Play / Pause
| OK| Confirm Selection
■| Exit / Stop

Ensure the remote control is pointed toward the IR receiver on the display. No obstacles should be placed between the remote control and the IR receiver. The effective receiving distance for the controller is 3 meters.

1. To ensure a normal operation, the remote control should not be dropped or damaged in any way. It should also be kept dry and away from all heat sources.
2. Battery replacement is necessary when the remote controller acts inconsistently or stops operating the LCD display.

Input Source

Choose the input source
If you want to show the video from the external input source, chose the right source in OSD. You need to connect the devices first, otherwise, when you select the source the none or no signal will appear on the screen, Press Source -> Navigate using the up and down key -> Click “>” to select the source

• HDMI : the input source from HDMI
• VGA : the input source from VGA
• BNC : the input source from BNC
• USB/SD：Monitor built-in multimedia to display advertisement Video or Photo

The PVM Can automatically switch between the Advertisement and Camera based on motion detection pls refer to the setting of the PVM Image mode>Motion. The PVM can also auto switch between different channel based on time, pls refer to the Image Mode setting>Switch

OSD Setup

OSD Setup under HDMI/AV Input Mode

PICTURE

Picture Mode| Press “OK “button to select picture modes, then press the

SOUND

Sound Mode| Press “< or >” button to select sound modes, “Music, Movie, Sports, standard, or User”. Then, press “Menu” button to exit.
Balance| Adjusts how much audio is sent to the left and right (-50 to +50). The intermediate value is 0, when indication value of balance increases toward +50, sound of the right and left speaker becomes stronger and weaker, respectively, when indication value of balance decrease toward -50 sound of the right and left speaker becomes weaker and stronger. Press “OK “button, then press the “< or >” button to adjust sound of the right and left. Finally, press “Menu” button to exit.
Mute| Press “< or >” button to select ”On or Off”,Then, press “Menu” button to exit.

OPTION

OSD Language| There are nine kinds of languages. Press “< or >” button to select the languages which you need. Finally, press “Menu” button to exit.
OSD H/V Pos| Press “< or >” button to set OSD position on the screen.
OSD Timeout| Press “< or >” button to set the time that OSD disappear from the screen.
OSD
Transparency| Press “< or >” button to set the OSD transparency. (Low, Middle, or High)
Restore Factory| Press “ >” button to Restore factory menu.
Mirror H/V| Press “< or >” button to select “On or Off”. Then the picture could flip (horizontally or vertically).
Backlight| Press “< or >” button to set backlight. You have three sections: “High, Middle and Low”. Finally, press “Menu” button to exit.

ADVANCE

H/V-Start| Press “< or >” button to set the over scan In this part. Finally, press “Menu” button to exit.
H/V- Size| Press “< or >” button to set the size of horizontal/ Vertical over-scan. Finally, press “Menu” button to exit.

OSD Setup (VGA)

OSD Setup under VGA Input Mode

PICTURE

Picture Mode| Select your preferred color module Press “OK “button to select picture modes, then press the “< or >” button to select “Standard, Dynamic, Mild or User”. Finally, press “Menu” button to exit.
Color Temperature| Select your preferred color Temperature, Press ”OK” button to Change the color intensity of the temperature Selected (Medium, Warm, Cool or User), you could change “RGB”. Finally, press “Menu” button to exit.
Aspect Ratio| Change the screen between 4:3 and 16:9, Press “OK “button to select picture scales, then press the ““ button to select “ 4:3 or Full”. Finally, press “Menu” button to exit
Noise Reduction| N/A.

SOUND

Sound Mode

| Press “< or >” button to select sound modes, “Music, Movie, Sports, standard or User”. Then press “Menu” button to exit.
Balance| Adjusts how much audio is sent to the left and right ( -50 to +50). The intermediate value is 0, when indication value of balance increases toward +50, sound of the right and left speaker becomes stronger and weaker, respectively, when indication value of balance decrease toward -50 sound of the right and left speaker becomes weaker and stronger. Press “OK “button, then press the “< or >” button to adjust sound of the right and left. Finally, press “Menu” button to exit
Mute| Press “< or >” button to select ”On or Off”,Then, press “Menu” button to exit.

OPTION

OSD Language| There are nine kinds of languages. Press “< or >” button to select the languages which you need. Finally, press “Menu” button to exit.
OSD H/V Pos| Press “< or >” button to set OSD position on the screen.

OSD Timeout

| Press “< or >” button to set the time that OSD disappear from the screen.
OSD

Transparency

| Press “< or >” button to set the OSD transparency. (Low, Middle, or High)
Restore Factory| Press “ >” button to Restore factory menu.
Mirror H/V| Press “< or >” button to select “On or Off”. Then the picture could flip (horizontally or vertically).
Backlight| Press “< or >” button to set backlight. You have three sections: “High, Middle and Low”. Finally, press “Menu” button to exit.

Setup Under SD Card / USB

**Function**| Press source on the monitors OSD setting and select either USB or SD Card. Navigate through the showing menu’s to select the file format of the file loaded on the USB or SD Card.
---|---

Care and Cleaning

CAUTION: Turn off your MONITOR before cleaning.
You can clean the MONITOR as required, using a soft lint-free cloth. Be sure to occasionally dust the ventilation slots in the cabinet to help assure adequate ventilation. The Monitor’s screen may be cleaned with a soft, lint- free cloth as well. Take care not to scratch or mar the screen. If necessary, you may use a cloth dampened with warm water. While cleaning do not spray liquid directly on the screen since the liquid can run down the screen and enter inside the Monitor. Also, never place drinks or vases with water on top of the monitor. This could increase the risk of fire or shock hazard or damage to the monitor.

Mounting Monitor to Wall

CAUTION: The wall mount should be able to support the weight of the monitor indicated in the specifications (At least allow 5 to 10lbs extra). Use the VESA hole to mount the screw with at least 8mm length screw.

Specifications

INTERFACE
Inputs| BNC x1, HDMI x1, VGA x1, RJ45 x1, USB x1, Audio x1 , SD Slot x1
Outputs| BNC x1
AUDIO
Speaker| 2.5W x2
ADVANTAGES
Features| Auto Adjustment, 3D Comb Filter, 3D Noise Reduction, Multi Language
CABINET
Color/Material| Black/Durable Metal Housing
POWER
Min. PoE Required| PoE++ (802.3bt Type 3) 60W (Injector Not Included)
Consumption| 35W
Electrical Rating| AC 100V ~ 240V, 50/60Hz
TEMPERATURE
Operating| 0~40°C
VESA™
Mount Size (mm)| 100 x 100 / 200 x 200 / 400 x 200
COMPLIANT
Certification| CE/FCC

Dimensions

30398 Esperanza, Rancho Santa Margarita CA 92688

• Tel. 949-586-3338
• Fax. 949-272-4594
• Email. info@gvision-usa.com

References

• USA Location information - USA.com
• GVISION-USA.COM

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>