EDIFIER W830NB Wireless Over Ear Headphones with Active Noise Cancellation User Manual
- June 1, 2024
- Edifier
Table of Contents
W830NB
Wireless Over-Ear
Headphones with Active
Noise Cancellation
Manual
W830NB Wireless Over Ear Headphones with Active Noise Cancellation
For more information, please visit our website:
www.edifier.com
Edifier International Limited
PO. Box 6264
General Post Office
Hong Kong
www.edifier.com
©2024 Edifier International Limited. All rights reserved.
Printed in China
NOTICE:
For the need of technical improvement and system upgrade, information
contained herein may be subject to change from time to time without prior
notice.
Products of EDIFIER will be customized for different applications.
Pictures and illustrations shown on this manual may be slightly different from
actual product.
If any difference is found, the actual product prevails.
Model: EDF200163 XX-XXX-XXXXXXeXX V1.0
WHAT’S IN THE BOX
POWER ON/OFF
Press and hold the power button to power on/off.
FIRST PAIRING
- Once powered on, the headphones will automatically enter Bluetooth pairing mode.
- Select “EDIFIER W830NB’ in your device setting to connect.
PAIRING FOR NEW DEVICE
- In ON state, press and hold the logo” button for about 3 seconds to enter Bluetooth pairing mode.
- Select “EDIFIER W830NB”‘ in your device setting to connect.
Note: For subsequent use, the headphones will automatically connect to the device used last time.
RESET
In ON state, press “”+'”” and “-” buttons for 5s to finish reset, then headphones will automatically enter Bluetooth pairing mode if successful.
CHARGING
Connect the headphones to a power source via the USB-C cable for charging.
Input: 5V 1A
Note: Make sure the USB port is completely dry before charging.
CONTROL
Note:
- Default sound control: Hight Noise Cancellation / Ambient Sound / Noise Cancellation Off.
- Default sound mode: Music Mode / Game Mode.
- Download Edifier ConneX App for more customizable control settings.
FCC statement:
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions:
- this device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation.
IC statement: CAN ICES-003(B) / NMB-003(B).
FCC ID: Z9G-EDF236
IC:10004A-EDF236
XXX-XXXXXX
Declaration for EU
Frequency Band: 2400MHz – 2483.5MHz
RF Power Output: ≤ 13 dBm (EIRP)
There is no restriction of use.
Hereby, Edifier International Limited declares that the radio equipment type
EDF200163 is in compliance with Directive 2014/53/EU. The full text of the EU
declaration of conformity is available at the following internet address:
https://www.edifier.com/int/eu-doc.html
Input: 5V 1A
@Edifierglobal
@Edifier_Global
@Edifier_Global
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>