EDIFIER TWS6 True Wireless Earbuds Instruction Manual
- June 1, 2024
- Edifier
Table of Contents
EDIFIER TWS6 True Wireless Earbuds
Product Information
Specifications :
- Model: TWS6
- Features: True Wireless Earbuds with Balanced Armature Drivers
- Charging: USB charging cable
- Included Accessories: Memory foam eartips, Silicone eartips, Earwings
- Rated Input: 5V 55mA (earbuds), 5V 500mA (charging case)
- Charging Time: Approximately 1.5 hours for a full charge
Product Usage Instructions
How to Wear Eartips and Earwings:
There are different sizes of eartips included. Select the suitable ones to
wear.
How to Wear Earwings:
- Keep the earbud and earwing in the same direction.
- Place the earwing over the earbud.
- Put the eartip over the earbud.
How to Wear Memory Foam Eartips:
- Pinch the memory foam eartip and put it over the earbud.
- Fix the earbud by hand and release until the memory foam eartip rebounds.
Charging Instructions:
Earbuds:
- Charging Time: About 1.5 hours for a full charge.
- Indicator light flashing in a breathing pattern = Charging.
- Indicator light off = Fully Charged.
Charging Case:
- Flashing times of indicator light indicate remaining charge capacity.
- Rapid flashing = Low battery capacity, charge promptly.
- Indicator light flashing = Charging.
- Indicator light off = Fully charged.
TWS Pairing and Controls:
- To enter pairing state, ensure indicator light flashes rapidly.
- To clear pairing records, open the case, place the earbuds in it, and press and hold the pairing button for approx. 10 seconds.
- Voice Assistant: Double click the left earbud.
- Pause/Play: Double click the right earbud.
- Call Controls: Double click to accept/end a call.
Frequently Asked Questions (FAQ)
-
No sound:
If there is no sound, ensure there is no obstacle between the earbuds and mobile phone. -
Poor call quality:
If call quality is not good, check for obstructions and ensure a clear line of communication between devices. -
Cannot control pause/play via earbuds:
If you cannot control pause/play via earbuds, check if your device supports the A2DP (Advanced Audio Distribution Profile) profile. -
Suggestions for Usage:
- Avoid using the product during intense exercise or with excessive sweat to prevent damage from moisture.
- Avoid exposing the product to high temperatures to prevent damage to electronic components and battery life.
- Avoid dropping or impacting the product to prevent internal circuit damage.
- Avoid damaging the shell to maintain the product’s appearance and functionality.
- If the product malfunctions, contact your qualified maintenance agency for assistance.
Edifier International Limited P.O. Box 6264 General Post Office Hong Kong
TWS6
True Wireless Earbuds with Balanced Armature Drivers
www.edifier.com
Product Description and Accessories
There are different size of eartips attached in the package, please select the suitable ones to wear.
Wearing Instructions
How to wear earwings
How to wear memory foam eartips
- Pinch memory foam eartip and put it over the earbud
- Fix the earbud by hand and release until the memory foam eartip rebounds
User Guide
-
Charge the Earbuds
- You may hear a warning tone when at low battery level, please charge the earbuds.
- Charging : place the earbuds in the charging case
- Charging time: about 1.5 hours for a full charging
- Indicator light flashing in a breathe pattern=charging Indicator light off=fully charged
-
Charge the Charging Case
Every time when the charging case is opened, the flashing times of indicator light on its bottom mean the times that the earbuds can be charged; if the indicator light flashes rapidly, it means the charging case has a low battery capacity, please charge the case in time. Indicator light flashing = charging Indicator light off = fully charged- Rated input: 5V 55mA(earbuds) 5V ****500mA(charging case)
- Warning: The rechargeable batteries that provide power for this product must be disposed properly for recycling. Do not dispose of batteries in fire to prevent an explosion.
- If the product with lithium battery is not used for long periods of time, please charge the product at least once per three months.
-
Power ON/OFF
- Power on automatically when taken out from the charging case;
- Power off automatically while placed in the charging case.
-
Bluetooth Connection
- Open the charging case, then press and hold the pairing button to enter pairing state, the indicator light flashes rapidly;
- Set mobile phone to search for and connect to either “EDIFIER TWS6 L” or “EDIFIER TWS6 R”, after pairing is successful, the indicator light flashes slowly.
- You can choose to use one earbud or both earbuds.
-
TWS (true wireless stereo) Pairing of the Left and Right Earbuds
- The left and right earbuds have finished TWS pairing before leaving factory. If the wireless connection fails to resume, please follow the steps below to re-pair:
- Place the earbuds in the charging case, then press and hold the pairing button for 8 seconds to enter TWS pairing state, the indicator light flashes rapidly;
- After pairing is done, blue lights of both earbuds flash slowly.
Functional Operation Instructions
Music Playback
Call (same operation for the left and right earbuds)
Clear pairing records: Whether the charging case is being charged or not, open the case and place the earbuds in it, then press and hold the pairing button for approx. 10 seconds to clear pairing records.
FAQs
- Indicator light is off during charging.
- Please ensure the earbuds are correctly placed in the charging case.
- When the earbuds are not used for long periods of time, the battery will enter sleep state, it needs to charge about 30 minutes and then the light will be lit.
- No sound
- Check if the earbuds are operating.
- Check if the earbuds volume is at an appropriate level.
- Check if the earbuds are correctly connected with mobile phone.
- Check if the earbuds are operating within a normal working range.
- Call quality of the earbuds are not good.
- Check if mobile phone is in an area with strong signal.
- Please ensure the earbuds are within effective distance (10m) and no obstacle between the earbuds and mobile phone.
- When playing music, cannot control pause/play via earbuds.
- Please ensure the paired device support AVRCP (Audio/Video Remote Control Profile) profile.
Maintenance
During using, please read the following suggestions carefully.
- Keep the product away from humid places to avoid affecting internal circuit. Do not use the product during intense exercise or with much sweat to prevent sweat from dropping into the product to make damage.
- Do not put the product in places exposed to sun or with high temperature. High temperature will shorten service life of electronic components, damage battery and deform plastic components.
- Do not put the product in cold places to avoid damaging internal circuit board.
- Do not dismantle the product. Non-professional personnel may damage the product.
- Do not drop, strongly vibrate, strike the product with hard object to avoid damaging internal circuit.
- Do not use drastic chemicals or cleaner to clean the product.
- Do not use sharp objects to scratch product surface to avoid damaging shell and affecting facade.
If the product cannot operate properly, please send it to your qualified maintenance agency.
Edifier International Limited
- P.O. Box 6264
- General Post Office
- Hong Kong
- www.edifier.com
- 2019 Edifier International Limited. All rights reserved.
- Printed in China
NOTICE :
- For the need of technical improvement and system upgrade, information contained herein may be subject to change from time to time without prior notice.
- Products of EDIFIER will be customized for different applications. Pictures and illustrations shown on this manual may be slightly different from actual product. Images are for illustrative purposes only and may differ from the actual product.
Edifier International Limited
- P.O. Box 6264
- General Post Office
- Hong Kong
- www.edifier.com
- 2019 Edifier International Limited.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>