EDIFIER EDF221 Comfo Run Open Ear Wireless Sports Headphones User Manual
- June 1, 2024
- Edifier
Table of Contents
EDIFIER EDF221 Comfo Run Open Ear Wireless Sports Headphones
Specifications
- Model: EDF200121 IB-200-xxxxxx-xx V1.0
- Dimensions: 90x180mm
- Weight: 80g
- Input: 5V1A
Product Information
The Comfo Run Open Ear Wireless Sports Headphones by EDIFIER are designed for
active individuals who enjoy listening to music while on the go. These
headphones offer a comfortable fit and high-quality sound for an enhanced
listening experience.
Power On/Off
To power on/off the headphones, press and hold the Multi-Function Button (MFB)
for about 3 seconds.
Pairing
- To pair the headphones for the first time, power them on and then select “EDIFIER Comfo Run” in your device settings to connect.
- In case of re-pairing, ensure the headphones are in OFF state, then press and hold the MFB for about 5 seconds. Select “EDIFIER Comfo Run” in your device settings to connect.
POWER ON/OFF
Press and hold the MFB for about 3s to power on/off.
FIRST PAIRING
Power on and then select “EDFIER Comfo Run” in your device setting to connect.
PAIRING
In OFF state, press and hold the MFB for about 5s.
Select “EDIFIER Comfo Run” in your device setting to connect.
RESET
Power on and then press the MFB 5 times to reset to factory settings.
For more information, please visit our website: www.edifier.com
- Edifier International Limited
- P.O. Box 6264
- General Post Office
- Hong Kong www.edifier.com
- 2023 Edifier International Limited. All rights reserved.
- Printed in China
NOTICE:
For the need of technical improvement and system upgrade, information
contained herein may be subject to change from time to time without prior
notice.
Products of EDIFIER will be customized for different applications. Pictures
and illustrations shown on this manual may be slightly different from actual
product.
If any difference is found, the actual product prevails.
Model: EDF200121 IB-200-xxxxxx-xx V1.0
- Open or close the case to power on/off.
- Power on then Select “EDIFIER W320TN” in your device setting to connect.
- Power on then press and hold the button for 3s.Select “EDIFIER W320TN” in your device setting to connect.
- Enter Bluethooth paring with Andriod device then comfirm the pop-up window to connect.
CHARGING
Input: 5V 1A
CONTROL
Note: Images are for illustrative purposes only and may differ from the actual product.
APP
Download Edifier ConnecX App for more customizable control settings.
Input: 5V 1A
Note: Images are for illustrative purposes only and may differ from the actual
product.
Customized controls and detailed instructions via Edifier Connect App.
FCC statement
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions:
- This device may not cause harmful interference, and
- This device must accept any interference received, including interference that may cause undesired operation.
- IC statement: CAN ICES-003(B) / NMB-003(B).
- FCC ID: Z9G-EDF221
- IC:10004A-EDF221
Declaration for EU
- Frequency Band: 2400MHz – 2483.5MHz
- RF Power Output: ≤13 dBm (EIRP)
- There is no restriction of use.
Hereby, Edifier International Limited declares that the radio equipment type
EDF200121 is in compliance with Directive 2014/53/EU. The full text of the EU
declaration of conformity is available at the following internet address:
https://www.edifier.com/int/eu-doc.html
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>