LISEN 2E416 3-In-1 Wireless Charging Power Bank User Manual

LISEN 2E416 3-In-1 Wireless Charging Power Bank

Thanks for choosing Lisen! To bring you a fantastic experience, please read the manual before using.

PRODUCT DESCRIPTION

This product is a multifunctionalportable power bank with a built-in PD fast charging cable, a digital display screen, a wireless chargingpad for smartwatches, support for phone magnetic wireless charging, and a low-current charging mode. It can be used for various small electronic devices such as mobile phones, tablets (iPads), Bluetooth earphones, small speakers, and soon .

1. Supports 20W PD fast charging for iPhone 8-15, compatible with magnetic wireless charging for Apple iPhone 12/13/14/15 series,supports up to 1.5w wireless charging for iWatch, and also supports 22.5W fast charging for Huawei devices.
2. The total wireless output power of the three-in-one and the mobile phone wireless charging only support 15W when working independently.

PRODUCT INFORMATION

• PRODUKT NAME
  LISEN 3-IN-1 WIRELESS CHARGING POWER BANK

• MODELL
  2E416

• MATERIAL
  FIRE-RESISTANT ABS+PC

• BATTERY
  POLYMER LITHIUM BATTERY

• PRODUCT DIMENSIONS
  L113W69H35MM

• WEIGHT
  APPROXIMATELY 351G

• MAGNET
  N52 STRONG MAGNET WITH A SUCTION FORCE OF 10N

• BATTERY CAPACITY
  20000MAH 3.85V 77WH

PRODUCT PARAMETERS

• LIGHTNING INPUT
  5V/2.4A

• TYPE-C INPUT
  5V/3A, 9V/2A, 12V/1.5A (PD 18W MAX)

• TYPE-C OUTPUT
  5V/3A, 9V/2.23A, 12V/1.67A (PD 20W MAX)

• USB OUTPUT
  5V/3A, 9V/2A, 12V/1.5A (QC 18W MAX)

• TYPE-C CABLE OUTPUT
  5V/3A, 9V/2.23A, 12V/1.67A (20W MAX)

• LIGHTNING CABLE OUTPUT
  5V/3A, 9V/2.22A (20W MAX)

• MULTI-PORT SIMULTANEOUS OUTPUT
  5V/3A 15W MAX

• PHONE WIRELESS OUTPUT/PHONE WIRELESS

  • 15W MAX. COMPATIBLE WITH
  • 15W/10W/7.5W/5W

• APPLE WATCH WIRELESS OUTPUT/IWATCH WIRELESS

  • 1.5W MAX

PRODUCT INDICATION STATUS

1. Power On/Off and Display:
   Pressing the power button will turn on the display screen and all symbols will light up for one second. Pressing the button twice in a row will turn off the output.

2. Interface and Charging Cable
   Discharge and Charging Indicator Light : The power bank’s interface and built- in cable can be used for charging smartphones immediately. During fast charging, the green lightning symbol will remain lit. Pressing the button twice in a row will turn off the output.

3. Wireless charging indication status: Press the button once for about 6 seconds to activate wireless charging. The wireless symbol on the display screen is always on. After recognizing the wireless load, it will enter the 10W/15W charging status, and the green lightning symbol will be always on. Double-click the button continuously to turn off the output.

4. Apple Watch wireless charging indication status: Press the button once to turn on wireless charging. The wireless charging symbol on the display screen will light up. Then, press and hold the button for about 3 seconds to activate the Apple Watch wireless charging. The wireless symbol on the display screen will be on continuously. After recognizing the Apple Watch wireless load, it will start charging. Double-click the button continuously to turn off the output.

PRECAUTIONS

1. This product must be used or stored at the specified temperature.

2.  Avoid using or storing in places with high humidity, microwaves, etc.

3.  Do not place the battery in a heat source or under direct sunlight as the temperature rise may shorten the product’s lifespan.

4. Use a manufacturer-approved charging device and charging program. Improper charging can cause power damage.

5. Avoid using appliances or loads that exceed the output current of this product (the circuit will protect and there will be no output).

6. Avoid strong physical impact, including hitting, throwing, stepping, squeezing, etc.

7. Do not throw the power source into the fire.

8. Non-professionals are strictly prohibited from disassembling this product.

9. If accidents occur due to failure to follow the above regulations, our company is not responsible This device generates and radiates radio frequency energy during use. If not installed and used in accordance with the instructions, it may cause harmful interference to radio communication. However, it cannot be guaranteed that interference will not occur in a particular installation
   If the device does cause harmful interference to radio or television reception and it can be determined by turning the device off or on, users are encouraged to try one or more of the following measures to correct the interference

   • Relocate or reposition the receiving antenna.
   • Increase the distance between the device and the receiver.
   • Connect the device to a different outlet than the one connected to the receiver.
   • Seek help from a dealer or experienced broadcast/TV technician.

The antenna should be kept at a distance of 0cm from the user,and the transmitter should not be placed with other transmitters or antennas.
Declaration of Toxic and Hazardous Substances in Electronic Information Products:

This form is prepared according to the specification of SJ/T11364.

• 0: Indicates that the content of the toxic and hazardous substance in all materials of the part is below the limit requirement stipulated in the GB/T26572 standard.
• X: The content of the listed toxic and hazardous substances in at least one homogeneous material of the part exceeds the limit requirement specified in the GB/T 26572 standard.

FCC Warning Statement

This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.
365 DAY
Worry-free 365-Day Warranty
24 HOURS
24/7 Easy-to-Reach Support Email support@lisen.us, get connection within 24 hours.

AFTER SALE SERVICE
Lisen always dedicates to bring great shopping experience for each customer. Please feel free to contact us if you have any questions.

support@LISEN.com

Shenzhen Xiangdangwen Technology Co., Ltd.
ADDRESS: 106, 1/F, No.313-4 Building Huachang Road, Langkou Community Dalang Street Longhua District, Shenzhen, China.
MANUFACTURE: Huizhou Yimai Electronics Technology Co.Ltd.
ADDRESS: 3rd Floor, Building B, Huakai High-tech Industrial Park, Electronic City Road, Longxi Street, Boluo County.

LISEN.COM

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>