LISEN 2E47 3 in 1 Wireless Charging Mobile Power Bank 10000mAh User Manual

Liseen3-in-1Wireless
ChaargingMobbilePower Bank
(10000 0mAh)with Cable

ProductReendering:

ProductCoolor:White baseshell,Semi-trannslucentblacklensgraymiddle fram andchargingcable.

ProductDescription:

1. This product is a multifunctional portable power bank with a built-in PD fast charging cable, a digital display screen, a wireless charging pad for smartwatches, support for phone magnetic wireless charging, and a low-current charging mode. It can be used for various small electronic devices such as mobile phones, tablets (iPads), Bluetooth earphones, small speakers, and so on.
2. It supports iPhone 8-14 20W PD fast charging/wireless charging, perfect matching for the 12-14 series magnetic wireless charging, supports smartwatch wireless charging with a maximum power of 2.5W, and supports Huawei 22.5W fast charging.

Product Information:

Product Name:| Lisen 3-in-1 Wireless Charging Mobile Power Bank (10000mAh) with Cable
---|---
Model:| 2E47
Material:|  Fire-resistant ABS+PC
Battery:|  Polymer lithium battery
Battery Capacity:|  10000mAh 3.85V 38.5Wh
Rat Capacityed:| 5800mAh
Product Size:| L112 W6E9H17mm (coil protrusion thickness 21mm)
Weight:| 210g
Magnet:| N52 strong magnet with a suction force of 10N

Product Parameters:

Product Indication Status and Meaning

1. Power On/Off and Display: Pressing the power button will turn on the display screen and all symbols will light up for one second. Pressing the button twice in a row will turn off the output.

2. Charging Indicator Light: When charging, the last digit of the current battery level on the white digital matrix screen will blink. During fast charging, a green lightning symbol will remain lit.

3. Interface and Charging Cable Discharge Indicator Light: The power bank’s interface and built-in cable can be used for charging smartphones immediately. During fast charging, the green lightning symbol will remain lit. Pressing the button twice in a row will turn off the output.

4. Wireless charging indication status: Press the button once for about 6 seconds to activate wireless charging. The wireless symbol on the display screen is always on.
   After recognizing the wireless load, it will enter the 10W/15W charging status, and the green lightning symbol will be always on. Double-click the button continuously to turn off the output

5. Apple Watch wireless charging indication status: Press the button once to turn on wireless charging. The wireless charging symbol on the display screen will light up.
   Then, press and hold the button for about 3 seconds to activate the Apple Watch wireless charging. The wireless symbol on the display screen will be on continuously.
   After recognizing the Apple Watch wireless load, it will start charging. Double-click the button continuously to turn off the output

Precautions

1. This product must be used or stored at the specified temperature
2. Avoid using or storing in places with high humidity, microwaves, etc
3. Do not place the battery in a heat source or under direct sunlight as the temperature rise may shorten the product’s lifespan
4. Use a manufacturer-approved charging device and charging program. Improper charging can cause power damage
5. Avoid using appliances or loads that exceed the output current of this product (the circuit will protect and there will be no output)
6. Avoid strong physical impact, including hitting, throwing, stepping, squeezing, etc
7. Do not throw the power source into the fire
8. Non-professionals are strictly prohibited from disassembling this product
9. If accidents occur due to failure to follow the above regulations, our company is not responsible

Warning:
This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help

The device has been evaluated to meet general RF exposure requirement. The devi ce can be used in portable exposure condition without restriction.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>