LISEN 2E721 Car Magnetic Wireless Charger Instruction Manual

LISEN 2E721 Car Magnetic Wireless Charger

Product Information

The product is a multifunctional blender designed to blend,chop, and puree various ingredients. It features a powerful motor with multiple speed settings to cater to different blending needs. The blender comes with a durable glass jar and stainless steel blades for efficient blending. Additionally, it has a secure lid with a removable cap for convenient ingredient addition during blending. The product is easy to clean and maintain, making it suitable for everyday use in kitchens.

Product Usage Instructions

1. Before using the blender for the first time, ensure that all parts are clean and free from any packaging materials.
2. Place the glass jar securely on the base of the blender.
3. Add the desired ingredients into the glass jar. Avoid overfilling to prevent spillage during blending.
4. Place the lid on the jar and make sure it is properly aligned with the handle.
5. Insert the removable cap into the lid’s opening if you wish to add additional ingredients during blending.
6. Ensure that the blender is placed on a stable and flat surface.
7. Plug in the power cord and switch on the blender.
8. For blending, select the desired speed setting based on the ingredients and desired consistency. Use lower speeds for soft ingredients and higher speeds for harder ones.
9. Press the blend button to start blending. Hold it down until you achieve the desired consistency.
10. After blending, switch off the blender and unplug it from the power source.
11. Remove the lid and carefully pour out the blended mixture from the glass jar.
12. Clean the glass jar, lid, and blades with warm soapy water and a sponge. Do not immerse the base of the blender in water.
13. Allow all parts to dry completely before reassembling for storage.

Thanks for choosing Lisen! To bring you a fantastic experience, please read the manual before using.

PRODUCT STRUCTURE

SPECIFICATION

• NAME
  LISEN METAL MAGNETIC WIRELESS
  CAR CHARGER

• MODEL
  2E721

• MATERIAL
  ABS/PC/ALUMINUM ALLOY/STAIN-
  LESS STEEL

• INPUT
  5V/2A 9V/2A

• OUTPUT
  5W/7.5W/10W/15W

• SIZE
  118MM61MM85MM

• WEIGHT
  300G

• INDICATOR
  LIGHT ON – POWER ON/LIGHT OFF
  – POWER OFF/ FLASH – METAL
  DETECTION

COMPATIBLE DEVICES

1. Headphone: Airpods Pro(With Magsafe battery)/Airpods Pro 2rd generation.
2. iPhone 12/13/14 series naked machine / Phone case with Magsafe /Phone case without Magsafe should be used with metal plate (Please refer to the following instruction).
3. Wireless charging phone without support Magsafe should be used with metal plate (Please refer to the following instruction).
4. Phone without wireless charger should be used with metal plate (Please refer to the following instruction).

SELECTION AND INSTRUCTION OF VENT HOOK CLIP

1. It is recommended to use extended hook clip in winter. Avoiding warm air blow car charger straightly and reducing slow charging caused by heating.
2. It is recommended to use compact hook clip in summer. Charging heat will be decreased if cold air blow car charger straightly.

METHOD

Tip: The installation procedure is the same for the short and long hook clips

1. Loosen the fixing nut;
2. Put the rotating ball into the bolt;
3. Tighten the fixing nut;
4. Turn the hook clip adjustment knob, adjust the hook clip to the biggest length;
5. Hook the hook clip into the blade,turn the hook clip adjustment knob to lock the blade tightly.
6. To remove the holder, loosen the adjusting knob of the hook clip, and then remove the holder from the blade.

The blade should be kept horizontal and perpendicular to the surface of the air vent.

USING STEPS

1. Position adjustment: press the sliding adjustment button, you can adjust the Rotating ball to the position you need.
2. Direction adjustment: loosen the support rod adjustment knob, you  can rotate the support rod 360° toadjust the direction, rotate it to the position you need, and then tighten the knob to fix the direction.

Tip: If the support rod adjustment knob fall off, you can screw it back clockwise.

INSTRUCTION OF METAL PLATE

Note: This metal plate is unsuitable for uneven phone case,phone case made of liquid silicone,oil spray ca- se, cloth &leather case.

1. if your phone case without Mags- afe, please install the metal plate to enable magnetic suction, process as follow.
2. Putting the plate metal positioning sheet on the back of your phone or case,align the edge of yourphone , ensure that the upper and lower scales / left and right scales are co- nsistent; take off the protective film of metal plate and stick it in the center of metal plate positioning sheet.

ATTENTION

1. For using a non-standard car charger: Please use car charger for QC 3.0 or more than 18W PD.

2. Metal accessories metal plate, ring buckle) or credit card will disturb charging. Phone case with metal, such as Pitaka, Evutec and Spigen QNMP will trigger foreign body detection and interrupt charging.

3. The speed of charging will be influenced significantly if GPS and music is running when charging.
   Please note that electric consumption speed will be higher than charging speed when using GPS.

4. lt is normal if the car charger heating slightly in using. Please stop to use it if heating seriously, and contact us through the After-Sal es mailbox.

365 Worry-free 365-Day DAY
Warranty

365 Worry-free 365-Day
DAY
Warranty
24 24/7 Easy-to-Reach
HOURS Support Email support@lisen.us, get connection within 24 hours.

AMZLAB GmbH Laubenhof 23,
45326 Essen
UKCA SERVICE LTD 21
Ellesmere Avenue, Worsley, Man-
chester, UK,M28 OAL

AFTER SALE SERVICE
Lisen always dedicates to bring great shopping experience for each customer. Please feel free to contact us if you have any questions.

@LISEN Tech
support@LISEN.com
@LISEN Tech
§ @LISEN Tech

ADDRESS: 106, 1. Stock, Nr. 313-4
Huachang Gasse,Gemeinschaft Langkou,
Dalang Straße, Bezirk
Longhua, Stadt Shenzhen,
Provinz Guangdong.

MANUFACTURE: Huizhou Yimai
Elektronische
Technik GmbH.
ADDRESS: 3.Stockwerk, Haus B,
Huakai Hightech
-Industriepark,Dianzicheng Str.
Longxi Wohnbezirk,Boluo Kreis.

FCC Warning Statement

This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

LISEN.COM

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>