BEGA 84 935 Compact Floodlight Instruction Manual

: June 1, 2024
: BEGA

Table of Contents

BEGA 84 935 Compact Floodlight
Compact floodlight
Instructions for use
safety
Installation
Cleaning · Maintenance
Accessories
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

BEGA 84 935 Compact Floodlight

Product Specifications

Lamp Module connected wattage: 10.2 W
Luminaire connected wattage: 11.8 W
Rated temperature: 25 – 55 °C
Ambient temperature: 25 – 55 °C
Colour temperature: 3000 K (LED-1148/930) and 4000 K (LED-1148/940)
Colour rendering index (CRI): > 90
Module luminous flux: 1500 lm (LED-1148/930) and 1575 lm (LED-1148/940)
Luminaire luminous flux: 1098 lm (LED-1148/930) and 1153 lm (LED-1148/940)
Luminaire luminous efficiency: 93.1 lm/W (LED-1148/930) and 97.7 lm/W (LED-1148/940)

Overvoltage Protection:
The luminaire comes with overvoltage protection in accordance with DIN EN 61547. For additional protection against transients, it is recommended to use separate overvoltage protection components available on the manufacturer’s website.

Safety Guidelines
Installation and operation of the luminaire should be done following national safety regulations. Only qualified electricians should carry out installation and commissioning. The manufacturer will not be liable for damage resulting from improper use or installation. Any modifications to the luminaire should be performed by authorized personnel..

Frequently Asked Questions (FAQ)
Q: Can I install the luminaire myself?
A: The installation and commissioning should only be carried out by a qualified electrician to ensure safety and proper functionality.

Compact floodlight

BEGA 84-935-Compact-Floodlight-1

Instructions for use

Application
Compact floodlight with mounting box for permanent installations on a wall, under a ceiling or on a pillar.

Product description

Luminaire made of aluminium alloy, aluminium and stainless steel
BEGA Unidure® coating technology
Colour graphite or silver
Clear safety glass
Reflector surface made of pure aluminium Rotation range of floodlight 350°
Swivel range -20°/+90°
Mounting box with 2 fixing holes
ø 6 mm · 85 mm spacing
2 cable entries for through-wiring of mains supply cable ø 7-10.5 mm, max. 5 G 1.5@ Connecting terminal 2.5@
with plug connection
Earth conductor connection
BEGA Ultimate Driver®
Complies with flicker requirements in accordance with IEEE 1789,
DIN IEC/TR 63158, DIN IEC/TR 61547-1 LED power supply unit
220-240 V 0/50-60 Hz
DC 176-264 V
DALI-controllable
Number of DALI addresses: 1
Basic insulation is provided between the mains and control cables
BEGA Thermal Control®
Temporary thermal regulation to protect temperature-sensitive components without switching off the luminaire
Safety class I
Protection class IP 65
Dust-tight and protection against water jets Impact strength IK09
Protection against mechanical
impacts < 10 joule
– Safety mark
– Conformity mark
Wind catching area: 0.058 m²
Weight: 5.0 kg
This product contains light sources of energy efficiency class(es) D

Overvoltage protection
The electronic components installed in the luminaire are protected against overvoltage in accordance with DIN EN 61547.
To achieve an additional protection against e. g. transients, etc. we recommend separate overvoltage protection components.
You can find them on our website at www.bega.com.

safety

The installation and operation of this luminaire are subject to national safety regulations. Installation and commissioning may only be carried out by a qualified electrician.
The manufacturer accepts no liability for damage caused by improper use or installation. If subsequent modifications are made to the luminaire, the person responsible for these modifications shall be considered the manufacturer.

Installation

Screw the floodlight G½ threaded connection firmly into the on-site G½ female thread or BEGA accessory.
G½ threaded connection torque = 40 Nm. Secure the screw connection from loosening on site (if provided with locking screw S, see fig. A).
Check the earth conductor connection between the G½ threaded connection and the on-site G½ female thread.

BEGA 84-935-Compact-Floodlight-2 Adjust floodlight:
Undo hexagon socket screw (wrench size 5 mm) and hexagon nut (wrench size 30 mm) and set the desired beam direction.

Torque :

Hexagon socket screw = 7 Nm
Hexagon nut = 35 Nm
Secure bolted connection Gß against loosening by tightening the hexagon socket screw (wrench size 2 mm) (see sketch B, C).
The electrical connection must be carried out with matching protection class and safety class, strain-relieved, with suitable connection terminals (not included in the scope of delivery) at the luminaire power supply cable.
Note correct configuration of the mains supply cable.
Make mains supply connection at the brown (L), blue (N) and green-yellow lead (1) .
The connection of the control cables is achieved by means of the both leads marked with DALI.
In case these leads are not used the luminaire will be operated at full light output.

Cleaning · Maintenance

Clean luminaire regularly with solvent-free cleansers from dirt and deposits.
Do not use high pressure cleaners.

Lamp

Module connected wattage 10.2 W
Luminaire connected wattage 11.8 W
Rated temperature ta = 25 °C
Ambient temperature ta max = 55 °C

84 935 K3

Module designation LED-1148/930
Colour temperature 3000 K
Colour rendering index CRI > 90
Module luminous flux 1500 lm
Luminaire luminous flux 1098 lm
Luminaire luminous efficiency 93,1 lm / W

84 935 K4

Module designation LED-1148/940
Colour temperature 4000 K
Colour rendering index CRI > 90
Module luminous flux 1575 lm
Luminaire luminous flux 1153 lm
Luminaire luminous efficiency 97,7 lm / W

Light technique

Broad spread light distribution.
Half beam angle 45°
For special lighting applications, an optical filter can be used to change the symmetrical light cone into a flat beam light distribution.

Replacing the LED module

The designation of the LE
Dmodule is noted on a separate label in the luminaire or on the underside of the specific LED module.
The light colour and light output of BEGA replacement modules correspond to those of the modules originally fitted. The replacement can be carried out by a qualified person using standard tools.
Disconnect the system from the power supply. Open the floodlight:
Remove the trim ring along with the safety glass and reflector by twisting it anti-clockwise. Replace LED module.
Please follow the installation instructions for the LED module.
Inspect and, if necessary, replace the luminaire gaskets.
Defective glass must be replaced.
Place the trim ring with glass and reflector on the floodlight housing so that the notches in the trim ring and luminaire housing sit on top of each other.
Twist on the trim ring clockwise as far as the stop.