COMMSCOPE SA,4C 4-Way Snap-in Style Hanger Stand-off Adapter Installation Guide
- August 6, 2024
- CommScope
Table of Contents
COMMSCOPE SA,4C 4-Way Snap-in Style Hanger Stand-off Adapter
Specifications:
- Material: Metal
- Size: 4-way adapter
- Mounting Hole Size: 3/4 inch
- Mounting Hardware Size: 3/8 inch
- Maximum Hanger Loading: Twelve 4-17 mm hangers or eight 26-42 mm hangers
Product Usage Instructions
Banding Installation:
Insert the banding through the desired slots on the 4-way adapter. Use the
outside slots for mounting on large diameter pipes and poles, and the inside
slots for smaller diameters.
Securing the Adapter:
Tighten the banding to securely attach the 4-way adapter to the round
member. Cut off any excess strap tail for a clean finish.
- Insert banding though desired slots. Use outside slots for mounting on large diameter pipes and poles. Inside slots for small diameters.
- Tighten banding to secure 4-way adapter tightly to round member. Cut off excess strap tail.
- Configuration showing adapter securely attached to round member. Maximum hanger loading is twelve 4-17 mm hangers or eight 26-42 mm hangers.
- 4-way adapter can also be mounted to tower angle and standoff adapters with 3/8” hardware. Same maximum hanger loading applies.
Additional CommScope Materials
Part Number| Description
CB-12-16LH| Heat-stabilized weather resistant acetal cable
banding, 1/2 in x 16 in length
CB-12-27LH| Heat-stabilized weather resistant acetal cable
banding, 1/2 in x 27 in length
CB-12-50| Cable banding, ½ inch X 50 foot reel
CB-LH-25| Locking heads for cable banding number CB-12-50
243684| Angle adapter
SSH-411| 4.0 mm to 11.0 mm cable hangers – PIM Free
SSH-1117| 11.0 mm to 17.0 mm cable hangers – PIM Free
SSH-2630| 26.0 mm to 30.0 mm cable hangers – PIM Free
SSH-3642| 36.0 mm to 42.0 mm cable hangers – PIM Free
Mounting Options:
Option 1: Attach the adapter to a round member as shown in the configuration. Ensure a tight fit for stability. The maximum hanger loading capacity varies based on the size of hangers used.
Option 2: The 4-way adapter can also be mounted to tower angle and standoff adapters using 3/8 hardware. The same maximum hanger loading capacity applies in this configuration.
Additional CommScope Materials:
For related products and accessories, refer to the following part numbers:
- CB-12-16LH
- CB-12-27LH
- CB-12-50
- CB-LH-25
- 243684
- SSH-411
- SSH-1117
- SSH-2630
- SSH-3642
Contact Information:
CommScope 3642 E US Highway 70, Claremont, NC 28610 USA
Technical Support: +1 888 297 6433
(Toll-Free US and Canada) or +1 828 323 4220 (local)
Website: www.commscope.com/wisupport
Frequently Asked Questions (FAQ):
Q: What is the maximum hanger loading capacity for the 4-way adapter?
A : The maximum hanger loading capacity is twelve 4-17 mm hangers or
eight 26-42 mm hangers.
Q: Can the 4-way adapter be mounted on tower angle and standoff adapters?
A : Yes, the 4-way adapter can also be mounted on tower angle and standoff adapters using 3/8 hardware. The same maximum hanger loading capacity applies in this configuration.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>