COLOMBO METALS + 500 ML Colour Instructions

May 15, 2024
COLOMBO

COLOMBO-LOGO

COLOMBO METALS + 500 ML Colour

COLOMBO-METALS-500-ML-Colour-PRODUCT

Product Information

Specifications

  • Brand: METALS +
  • Colour: 3 (Fe)
  • Optimal Iron Value: 0.15 mg/l

Product Usage Instructions

Dosage based on Iron test

  • 1 ml of the product should be used for every 100 litres of water, increasing 0.02 mg/l of iron. The optimal iron value to aim for is 0.15 mg/l.

Dosage based on Calcium test

  • Mix 4 ml of the product with 100 ml of Calcium plus solution as per your Calcium test results.

FAQ

  • How often should I test my iron levels when using METALS +?
  • We recommend testing your iron levels periodically to ensure they remain within the optimal range of 0.15 mg/l.
  • Can I use METALS + in combination with other water treatments?
  • It is essential to follow the dosage instructions provided and avoid mixing METALS + with other treatments unless explicitly stated by the manufacturer.

Instruction Manual

COLOMBO-METALS-500-ML-Colour-FIG-1

Colour-3 – Metals+ contains Iron and a.o. Manganese, Kobalt and Nickel. These elements are important especially yellow/green colours. Dosage after Iron test: 1 ml per 100 ltr increase the Iron content with +0,02 mg/l, optimal value is 0,15 mg/l. Iron can be absorbed quickly from seawater through phosphates. Hence, test and correct the Iron value once a week only. If you do not test the Iron content you can dose based on the Calcium absorption. Please note: This method is less accurate and must be used with care. Dose per 100 ml Colombo Calcium Plus added, 4 ml Colour-3. Shake well before use. Keep out of reach of children.

CONTACT

COLOMBO-METALS-500-ML-Colour-FIG-2

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals