Offgridtec Narootei5n9cefabq Mounting Clamp for Attachment User Guide

June 1, 2024
Offgridtec

Offgridtec Narootei5n9cefabq Mounting Clamp for Attachment User Guide

Offgridtec Narootei5n9cefabq Mounting Clamp for
Attachment

Feature

  • Solid and durable, made of aluminum and stainless steel
  • Fitting with the PV module frame height from 28-50 mm
  • For attaching other devices to the back of the PV module,especially for microinverters
  • Suitable for all brands of micro inverters
  • Easy installation
  • Available in Silver and Black

FIG 1 Feature.jpg

Part List

A. Stainless Steel T Bolt M830
B. Staiinless Steel Flat Washer D26
2
C. Stainless Steel Flange Nut M8
D. Stainless Steel HEX Bolt M6*55
E. Stainless Steel HEX Selflock Nut M6
F. AL6063-T5 Clamp L type
G. AL6063-T5 Gear Clamp adjustable

FIG 2 Part List.jpg

Step 1
Slide the Self lock nut (E) into the groove of Clamp G, right matching the position of screw hole.

FIG 3 Part List.jpg

Step 2
Connect the Clamp F and Clamp G by HEX bolt (D) through each of screw hole on the clamps and half locked by Selflock nut (E)
Tips: The wall of the groove where Selflock nut (E) stay could be regarded as stopper when turning the bolt

FIG 4 Part List.jpg

FIG 5 Part List.jpg

FIG 6 Part List.jpg

FIG 7.JPG

Read More About This Manual & Download PDF:

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals