Offgridtec FSP-2 Ultra Faltbares Solarmodul Instruction Manual
- June 4, 2024
- Offgridtec
Table of Contents
Offgridtec FSP-2 Ultra Faltbares Solarmodul
User instructions
Safety Instructions
- Read all safety instructions before using the product.
- The FSP-2 is used as a power generator. Electric current presents hazards such as electric shock and fire. Therefore, the products may only be used if the consumer is familiar with the hazards and has the expertise to operate the solar system safely.
- Avoid physical pressure on the solar bag, as well as sharp objects in the near distance
- A suitable solar charge controller is required for operation. You will find a suitable selection in our online sh op and in the user manual.
- When setting up/opening the solar bag, make sure it is placed on a firm surface.
- If the solar bag is placed behind a window, e.g. the windscreen of a vehicle, the FSP-2 module can become very hot. The hotter the solar pocket becomes, the lower the performance and the life expectancy of the solar pocket, so protect the FSP-2 from extreme heat.
- After installation, check all connections for tightness.
- Wear appropriate safety glasses when connecting the charge controller to the battery.
- If a charge controller is included in the delivery (FSP-2 kit), it must remain inside.
FSP-2 Ultra structure
- Solar charging package body
- Bracket
- Length 6 meters 10AWG black side-by-side cable, with Anderson plug at the end
- Length 0.5 meters 10AWG black side-by-side cable with Anderson plug on one end and E2510 terminal on the other end
- Length 1m 10AWG Black side-by-side cable, with Anderson plug on one end, battery clip on one end, fuse in the middle
Offgridtec FSP-2 Ultra Series
Set up/connection
- Connect the connection cables (4 and 5) to the charge controller.
- Connect battery connection cable (5) to the battery.
- Connect the module connection cable (3) of the FSP-2 Ultra to the connection cable (4).
- Unfolding the module fields
- Unfold the feet completely
- For a better hold there are eyelets in the feet, for fixing with ground pegs
- Alternative: hanging via Offgridtec suction cups. (available in our online store)
Place the FSP-2 Ultra in full sun, without shading. Guide the module towards the sun every one to two hours for optimal solar output.
Frequently asked questions (FAQ)
Q: How to clean the solar surface?
A: If the surface of the solar panels is covered with dust and dirt, it can be
cleaned with a soft sponge, then wipe the surface of the solar panels with a
damp cloth to remove the remaining dust and dirt.
Q: Is the FSP-2 series rainproof or suitable for permanent installation?
A: Yes, the FSP-2 series is rainproof and has a water-repellent, impregnated
fabric and can withstand a rain shower without any problems. It is important
that no connectors or charge controllers get wet. However, permanent
installation is not recommended!
Q: Which charge controller do you recommend for maximum yields?
A: To get the maximum yield from the FSP-2 Ultra, we recommend using MPPT
charge controllers. Recommended MPPT charge controller:
- Victron SmartSolar 75/15, 100/20
- Offgridtec MPPT PRO Duo 12/24V 30A
- Votronic MPP 165 Duo (bis 160W), MPP 250 Duo
Technical Datas
Typ| Anzahl
Zellen
| Abmessung| Gewicht| Nennleistung| Vmp| Imp|
Voc| Isc
---|---|---|---|---|---|---|---|---
Modul| Modul| mm| kg| Wp| V| A| V|
A
80W| 2x40W| 565 x 440 x 15| 3,7| 80| 20,88| 3,98| 25,64| 4,22
120W| 3x40W| 560 x 440 x 20| 5,1| 120| 39,6| 3,04| 46,6| 3,21
135W| 3x45W| 560 x 440 x 20| 5,1| 135| 19,8| 6,82| 23,3| 7,22
180W| 4x45W| 560 x 440 x 30| 5,4| 180| 39,6| 4,55| 46,6| 4,81
195W| 3x65W| 820 x 440 x 20| 8,2| 195| 33,5| 5,82| 39,4| 6,17
225W| 5x45W| 560 x 440 x 40| 6,0| 225| 37,2| 6,05| 43,7| 6,41
STC Conditions(Standard test condition): Irradiance:1,000W/㎡ – AM1.5 Spectrum – Temperature:25℃
Disclaimer
Improper execution of the installation may cause damage to property and thus
endanger persons. The manufacturer can neither monitor the fulfillment of the
conditions nor the methods during installation, operation, use and maintenance
of the system controller. Offgridtec, therefore, accepts no responsibility or
liability whatsoever for any loss, damage or costs incurred as a result of or
in any way connected with incorrect installation, improper operation and
incorrect use and maintenance.
Similarly, we accept no responsibility for patent infringements or
infringement of other third-party rights resulting from the use of this solar
bag.
The manufacturer reserves the right to make changes to its products, technical
data or assembly and operating instructions, even without prior notification.
Opening the device, improper manipulation and repair attempts, as well as the
improper operation will result in loss of warranty.
Contact
Tel +49 (0) 8721 77861-87
Fax +49 (0) 8721 98290-98
Mail info@offgridtec.com
Onlineshop
www.offgridtec.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>