VOLLRATH 74701D Drop-in Induction Retherm Instruction Manual
- June 1, 2024
- VOLLRATH
Table of Contents
VOLLRATH 74701D Drop-in Induction Retherm
Product Specifications:
- Manufacturer: The Vollrath Company, L.L.C.
- Part Number: 26237-1
- Website: www.vollrath.com
- Address: 1236 North 18th Street Sheboygan, WI 53081-3201 U.S.A.
- Main Tel: 800.624.2051 or 920.457.4851
- Main Fax: 800.752.5620 or 920.459.6573
Product Usage Instructions
- Ensure the surface where the product will be installed is clean and dry.
- Place the rim gasket around the designated area, without stretching it.
- If needed, use scissors to trim the gasket to the proper length.
- Continue with the installation procedure as outlined in the Operator’s Manual provided.
Frequently Asked Questions (FAQ):
-
Q: How do I know if the gasket needs trimming?
A: If the gasket appears too long or is causing difficulty during installation, it may need trimming. Use scissors to carefully cut it to the required length. -
Q: Where can I find technical support for this product?
A: For technical services related to induction products, contact 800.825.6036. For countertop warming products, call 800.354.1970. For all other products, reach out to 800.628.0832. Contact Customer Service at 800.628.0830 for further assistance or inquiries.
Installation Instructions
Mirage® Drop-in Induction Warmer/Rethermalizer Gasket Installation
Purpose
This document is a supplement to the Operator’s Manual. It explains how to
install the gasket onto the rim of the Mirage® Drop-in Induction Warmer and
Rethermalizer. Install the gasket before performing the installation procedure
in the Operator’s Manual.
NOTICE: Gasket installation is mandatory. Failure to install the gasket
will void the warranty.
- Turn the equipment so the bottom is facing up.
- Set the equipment on a stable surface, such as a countertop.
- Lubricate the gasket with a small amount of liquid dish soap or water.
- Carefully press the groove of the gasket onto the underside edge of the rim. Take care to evenly press the gasket as you feed it onto the rim, without stretching it.
- If needed, use a scissors to trim the gasket to the proper length.
- Continue with the installation procedure in the Operator’s Manual.
The Vollrath Company, L.L.C. 1236 North 18th Street
- Sheboygan, WI 53081-3201 U.S.A.
- Main Tel: 800.624.2051 or 920.457.4851
- Main Fax: 800.752.5620 or 920.459.6573
- Customer Service: 800.628.0830
- Canada Customer Service: 800.695.8560
- Technical Services techservicereps@vollrathco.com
- Induction Products: 800.825.6036
- Countertop Warming Products: 800.354.1970
- All Other Product s: 800.628.0832
- www.vollrath.com
- © 2015 The Vollrath Company L.L.C.
- Part No. 26237-1
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>