VOLLRATH 741105D Drop In Induction Retherm Instruction Manual
- June 1, 2024
- VOLLRATH
Table of Contents
VOLLRATH 741105D Drop In Induction Retherm
Specifications
- Manufacturer: The Vollrath Company, L.L.C.
- Address: 1236 North 18th Street Sheboygan, WI 53081-3201 U.S.A.
- Main Tel: 800.624.2051 or 920.457.4851
- Main Fax: 800.752.5620 or 920.459.6573
- Customer Service : 800.628.0830
- Canada Customer Service: 800.695.8560
- Email: techservicereps@vollrathco.com
- Induction Products Technical Services: 800.825.6036
- Countertop Warming Products Technical Services: 800.354.1970
- All Other Products Technical Services: 800.628.0832
- Part No.: 26237-1
- Date: 11/5/15
Installation Instructions
- Ensure the rim gasket is not stretched during installation.
- If necessary, use scissors to trim the gasket to the correct length.
- Refer to the Operator’s Manual for detailed installation procedures.
FAQ
Q: What should I do if the gasket is too long after installation?
A: If the gasket is too long, carefully trim it using scissors to fit the
required length.
Mirage® Drop-in Induction Warmer/Rethermalizer Gasket Installation
Purpose
This document is a supplement to the Operator’s Manual. It explains how to
install the gasket onto the rim of the Mirage® Drop-in Induction Warmer and
Rethermalizer. Install the gasket before performing the installation procedure
in the Operator’s Manual.
NOTICE: Gasket installation is mandatory. Failure to install the gasket will void the warranty.
- Turn the equipment so the bottom is facing up.
- Set the equipment on a stable surface, such as a countertop.
- Lubricate the gasket with a small amount of liquid dish soap or water.
- Carefully press the groove of the gasket onto the underside edge of the rim. Take care to evenly press the gasket as you feed it onto the rim, without stretching it.
- If needed, use scissors to trim the gasket to the proper length.
- Continue with the installation procedure in the Operator’s Manual.
The Vollrath Company, L.L.C.
- 1236 North 18th Street
- Sheboygan, WI 53081-3201 U.S.A.
- Main Tel: 800.624.2051 or 920.457.4851
- Main Fax: 800.752.5620 or 920.459.6573
- Customer Service: 800.628.0830
- Canada Customer Service: 800.695.8560
Technical Services
- techservicereps@vollrathco.com
- Induction Products: 800.825.6036
- Countertop Warming Products : 800.354.1970
- All Other Products : 800.628.0832
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>