VOLLRATH 74703D Drop In Induction Retherm Instruction Manual
- June 1, 2024
- VOLLRATH
Table of Contents
VOLLRATH 74703D Drop In Induction Retherm
Product Information
Specifications
- Manufacturer: The Vollrath Company, L.L.C.
- Part Number: 26237-1
- Website: www.vollrath.com
- Address: 1236 North 18th Street Sheboygan, WI 53081-3201 U.S.A.
- Main Tel: 800.624.2051 or 920.457.4851
- Main Fax: 800.752.5620 or 920.459.6573
- Customer Service: 800.628.0830
Product Usage Instructions
Installation Instructions
- Ensure the rim gasket is installed without stretching it.
- If needed, use scissors to trim the gasket to the proper length.
- Continue with the installation procedure as outlined in the Operator’s Manual.
Frequently Asked Questions (FAQ)
-
Q: Can I use this product for outdoor applications?
A: This product is designed for indoor use only and should not be used outdoors. -
Q: How often should I clean the product?
A: It is recommended to clean the product after each use to maintain optimal performance and hygiene. -
Q: What should I do if I encounter a problem with the product?
A: In case of any issues or malfunctions, please contact Customer Service at the provided numbers for assistance.
Installation Instructions
Mirage® Drop-in Induction Warmer/Rethermalizer Gasket Installation
Purpose
This document is a supplement to the Operator’s Manual. It explains how to
install the gasket onto the rim of the Mirage® Drop-in Induction Warmer and
Rethermalizer. Install the gasket before performing the installation procedure
in the Operator’s Manual.
NOTICE: Gasket installation is mandatory. Failure to install the gasket will void the warranty.
- Turn the equipment so the bottom is facing up.
- Set the equipment on a stable surface, such as a countertop.
- Lubricate the gasket with a small amount of liquid dish soap or water.
- Carefully press the groove of the gasket onto the underside edge of the rim. Take care to evenly press the gasket as you feed it onto the rim, without stretching it.
- If needed, use a scissors to trim the gasket to the proper length.
- Continue with the installation procedure in the Operator’s Manual.
The Vollrath Company, L.L.C.
1236 North 18th Street
Sheboygan, WI 53081-3201 U.S.A. Main Tel: 800.624.2051 or 920.457.4851 Main
Fax: 800.752.5620 or 920.459.6573 Customer Service: 800.628.0830 Canada
Customer Service: 800.695.8560
Technical Services
techservicereps@vollrathco.com
Induction Products: 800.825.6036 Countertop Warming Products: 800.354.1970 All
Other Products: 800.628.0832
© 2015 The Vollrath Company L.L.C.
Part No. 26237-1