VOLLRATH R3873546N Cafeteria Breath Guard Installation Guide
- June 1, 2024
- VOLLRATH
Table of Contents
VOLLRATH R3873546N Cafeteria Breath Guard
Product Information
Specifications
- Brand: Vollrath
- Model: Cafeteria Breath Guard
- Types: One Piece and Three Piece
- Item No.: 2350030-01
Product Usage Instructions
One Piece Breath Guard Installation:
- Ensure the breath guard uprights (A) and studs (B) are available.
- Secure the breath guard uprights to the studs using cap nuts (C). Be cautious not to overtighten to avoid cracking the plastic.
- Repeat the installation for all four uprights.
Three Piece Breath Guard Installation:
- Make sure the breath guard uprights (A), studs (B), and support tube (D) are available.
- Secure the breath guard uprights to the studs using cap nuts (C). Avoid overtightening.
- Attach the breath guard support tube between the uprights and secure with cap nuts as shown.
- Install the one piece breath guard, side breath protectors, and side shield following the provided instructions.
- Complete the installation by attaching the support bar and stud assembly to the side breath guards and securing the top breath guard.
Frequently Asked Questions (FAQ)
-
Q: What should I do if I encounter cracked plastic during installation?
A: If you notice cracked plastic while tightening the cap nuts, stop immediately to prevent further damage. Contact Vollrath’s Service Tel for assistance. -
Q: Can I install the breath guard without all the components?
A: It is crucial to follow the complete installation process with all components provided to ensure proper functionality and stability of the breath guard.
These instructions cover the installation of the one pice Cafeteria Breath Guard and the three piece Cafeteria Breath Guard.
Breath Guard Installation
One Piece Breath Guard Installation
Some units are shipped with a breath guard not installed. To install the breath guard follow these steps:
NOTE: Use caution when tightening the cap nuts. Overtightening may cause the plastic to crack.
- Install the breath guard uprights (A) to the studs (B) securing with cap nuts (C) as shown. See Figure 1. Repeat for all four uprights.
- Install the breath guard support tube (D) between the uprights (A) securing with cap nuts (C) as shown. Repeat on the other side.
- Install the one piece breath guard (E) securing with screws (F) and cap nuts (C) as shown. Repeat for all four mounting locations.
- Install the side breath protector (G) to the support tube (D) securing with cap nuts (C) as shown. Repeat on the other side.
Three Piece Breath Guard Installation
Some units are shipped with a breath guard not installed. To install the breath guard follow these steps:
NOTE: Use caution when tightening the cap nuts. Overtightening may cause the plastic to crack.
- Install the breath guard uprights (A) to the studs (B) securing with cap nuts (C) as shown. See Figures 1 and 2. Repeat for all four uprights.
- Install the breath guard support tube (D) between the uprights (A) securing with cap nuts (C) as shown. Repeat on the other side.
- Install the side breath guards (E) securing with screws (F) and cap nuts (C) as shown. Repeat for all mounting locations.
- Install the side shield (G) to the support tube (D) securing with cap nuts (C) as shown. Repeat on the other side.
- Install the support bar and stud assembly (H) to the side breath guards (E). Repeat for all mounting locations.
- Install the top breath guard (I) to the support bar and stud assembly (H) securing with cap nuts (C). Repeat for all mounting locations.
The Vollrath Company, L.L.C.
1236 North 18th Street
Sheboygan, WI
53081-3201
U.S.A.
Main Tel: 800.628.0830
Service Tel: 800.628.0832
FAX: 800.752.5620
Vollrath of Canada, Co.
Tel: 800.695.8560
FAX: 800.752.5620
© 2010 The Vollrath Company, L.L.C.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>