VOLLRATH 5960845 Mirage Induction Warmer Installation Guide

Table of Contents

VOLLRATH-5960845-Mirage-Induction-Warmer-PRODUCT

Specifications

Manufacturer: Vollrath
Compatibility: Vollrath drop-in induction cookers and warmers
Material: Food-grade silicone
Clamp Requirement: Minimum of four clamps for two hob templates, a minimum of eight clamps for four hob templates

Installation Instructions

Ensure the induction template is installed by qualified service or installation personnel.
Verify that the induction unit is in contact with the bottom of the induction template for proper operation.
Measure the template, unit, and countertop to ensure a proper fit before installation.
Apply food-grade silicone around the edge of the template to secure it in place and prevent liquid from entering the unit.

Installation of Vollrath Induction Templates

Use a minimum of four clamps for two hob templates and a minimum of eight clamps for four hob templates, evenly spaced.
Maintain all clearance and air circulation requirements for the induction unit(s) as per the operator’s manual specifications.
Consider drawer, door, and other clearances before installation of the Vollrath template and unit.
Note that Vollrath is not responsible for damage during installation or subsequent use due to different installation methods.

FAQ

Q: Can I use the Vollrath induction templates with other brands of induction cookers?

A: No, the induction templates are designed to be used specifically with Vollrath drop-in induction cookers and warmers for optimal performance.

Q: How should I clean the induction template?

A: Clean the induction template with a mild soapy solution and a soft cloth. Avoid abrasive cleaners that may damage the surface.

Vollrath Induction Template Instructions

The Vollrath induction templates are specially manufactured to the highest standards.
To maximize the life and beauty of these surfaces, read and follow all the instructions.
The Vollrath induction template must only be installed by qualified service or installation personnel.
These induction templates should only be used with Vollrath drop-in induction cookers and warmers. The top of the induction unit must be in contact with the bottom of the induction template for proper operation.
Measure the induction template, induction unit, and countertop before installation to verify the template will fit.
Apply food-grade silicone between the induction template and the countertop around the entire edge. This will help the template stay in place and reduce liquid from entering the induction unit.
A minimum of four clamps must be used with two hob templates and a minimum of eight clamps evenly be used with four hob induction templates.
All clamps must be evenly spaced.
All clearance and air circulation requirements for the induction unit(s) must be maintained. See the unit’s operator’s manual specifications.
Drawer, door, and other clearances need to be considered before installation of the Vollrath temple and the Vollrath induction unit.
Due to the variety of installation applications and installation methods
Vollath is not responsible for damage to the induction template or induction unit during installation or subsequent use.

INSTALLATION OF VOLLRATH INDUCTION TEMPLATES

The strategy or method you choose may differ from the one listed below. Figure 1 shows the method currently used to install an induction template to a Vollrath Buffet Table.
Figure 2 shows another method which can be used. (Note: All clips, clamps and fastening hardware shown are customer provided.)
A Vollrath induction template.
B Countertop or tabletop.
C Vollrath drop-in induction unit.
D Clamp. Figure 1 shows a wood clamp. Figure 2 shows a metal clamp commonly used for mounting under cabinet sinks.
E Fastener.
F Nut.
G Washer.