VOLLRATH JT1 Conveyor Bread and Bun Toasters Owner’s Manual

VOLLRATH JT1 Conveyor Bread and Bun Toasters

Product Information

Specifications:

• Models: JT1, JT1H
• Item No.: CT2-120350, CT2-23035003, CT2-23035002, CT2H-120250, CT2H-23025003, CT2H-23025002
• Voltage: JT1 – 220-240V, JT1H – 220-240V
• Slices Per Hour: JT1 – 500, JT1H – 250
• Plug Types: NEMA 5-15P (for JT1), UK, Schuko (for JT1H)

Product Usage Instructions

CLEARANCE AND ENVIRONMENT REQUIREMENTS
Ensure the toaster is placed on non-combustible surfaces away from curtains and heat-producing appliances.

BEFORE FIRST USE

1. Clean the toaster as per Daily Cleaning instructions on page 2 of the manual.
2. Ensure the feed ramp is in the up position.

FEATURES

• Conveyor Speed ​​Control Knob
• Power Knob (Full Power, Standby)
• Feed Ramp
• Crumb Tray
• Pan Collection
• Reset Button

OPERATION

• Preheat:

1. Plug the toaster into a grounded electrical outlet matching the rated voltage.
2. Rotate the power knob to the full power position.
3. Set the conveyor speed control knob to 7.
4. Wait for 5 minutes for the toaster to preheat.

FAQ (Frequently Asked Questions):

• Q: Can I use the JT1H model toaster for standard-size bread?
  A: The JT1H model toasters are not recommended for toasting standard-size bread.

• Q: What happens if I do not install the crumb tray during operation?
  A: Failure to install the crumb tray will cause the toaster to overheat.

Thank you for purchasing this Vollrath equipment. Before operating the equipment, read and familiarize yourself with the following operating and safety instructions. SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE. Save the original box and packaging. Use this packaging to ship the equipment if repairs are needed.

SAFETY PRECAUTIONS

To ensure safe operation, read the following statements and understand their meaning. This manual contains safety precautions which are explained below. Please read carefully.

• Warning is used to indicate the presence of a hazard that will or can cause severe personal injury or death.
• Caution is used to indicate the presence of a hazard that will or can cause minor or major personal injury if the caution is ignored.
• NOTICE: Notice is used to note information that is important but not hazard-related.

To reduce risk of injury or damage to the equipment

• Plug only into grounded electrical outlets matching the voltage on the rating plate.
• Use this equipment in a flat, level position.
• Unplug equipment and let it cool before cleaning or moving. Equipment remains hot after it is turned off.
• Do not touch during operation.
• Unplug when not in use.
• Keep equipment and power cord away from open flames, electric burners or excessive heat.
• Do not operate unattended.
• Closely supervise equipment operating in public areas and/or around children.
• Do not operate if equipment has been damaged or is malfunctioning in any way.

FUNCTION AND PURPOSE

This equipment is intended to toast bread products. It is intended for use in commercial foodservice operations only. It is not intended for household, industrial or laboratory use. The JT1H model toasters are not recommended for toasting standard size bread.

Item No.| Model| Voltage| Slices Per **Hour* (Up to)| Product Opening| Plug**
---|---|---|---|---|---
CT2-120350| JT1| 120| 350| 1³⁄₈ (3.2)| NEMA 5-15P
CT2-23035003| 220-240| 500| UK
CT2-23035002| Schuko
CT2H-120250| JT1H| 120| 250| 1-2¹⁄₈ (2.5-7.6)| NEMA 5-15P
CT2H-23025003| 220-240| 500| UK
CT2H-23025002| Shuko

Slices per hour is based on maximum conveyor speed. Conveyor speed determines toasting time and affects color and texture of the toast. Results may vary based upon type of bread, color and texture preference.

CLEARANCE AND ENVIRONMENT REQUIREMENTS

Do not place on surfaces or near walls, partitions or kitchen furniture unless they are made of non-combustible material or clad with noncombustible heat- insulating material. Toasters must not be used near or below curtains and other combustible materials. Do not place the toaster adjacent to a heat producing appliance.

BEFORE FIRST USE

1. Clean the toaster. See “Daily Cleaning” on page 2.
2. Place the feed ramp in the up position. It is shipped folded down in the crumb tray.

FEATURES

• A. Conveyor Speed Control Knob
• B. Power Knob
• C. Feed Ramp
• D. Crumb Tray
• E. Collection Pan
• F. Reset Button

OPERATION

CAUTION – Burn Hazard
Do not touch the equipment while it is heating or operating.
Hot surfaces can burn skin.

NOTICE: The crumb tray must be installed in the toaster during operation. Failure to install the crumb tray will cause the toaster to overheat.

Preheat

1. Plug the toaster into a grounded electrical outlet that matches the rating on the name plate found on the back of the toaster.
   NOTICE: Using a voltage other than the nameplate rated voltage will cause damage to the unit. Incorrect voltage, modification to the power cord or electrical components can damage unit and will void the warranty.

2. Rotate the power knob to the full power position (I).

3. Set the conveyor speed control knob to 7.

4. Wait 5 minutes for the toaster to preheat.

Test

1. Adjust the settings for the bread to be toasted. Test the settings by placing a sample of the bread items to be toasted onto the feed ramp.
2. Evaluate the results.

Tips

slower conveyor speed.
Buttered or coated, such as pastries| Not recommended.
Frozen| Must be thawed before toasting.

Toast

1. Adjust the conveyor speed as needed.
   • Toast too light: Rotate the speed control knob to a lower number to reduce the speed and darken the toast.
   • Toast too dark: Rotate the speed control knob to a higher number to increase the speed control and lighten the toast.
2. For best performance do not overload the toaster. Wait a few seconds before loading a second row of bread into the toaster.

If Bread Becomes Stuck

1. Rotate the power knob to the OFF position (O) and unplug the toaster.
2. Let the toaster cool completely.
3. Use tongs to remove the bread item. Take care to not bump the glass heating elements above and below the conveyor.

CLEANING

WARNING – Electrical Shock Hazard
Do not spray water or cleaning products. Liquid could contact the electrical components and cause a short circuit or an electrical shock.

CAUTION – Burn Hazard
Allow equipment to cool before moving or cleaning.

NOTICE: Do not use abrasive materials, scratching cleansers or scouring pads to clean the exterior of the equipment. These can damage the finish.
NOTICE: Heating elements do not need to be cleaned. Crumbs and food debris will burn off. Over time the heating elements may develop a chalky appearance, but this will not impact performance.

Daily Cleaning

1. Before turning off the equipment and with the conveyor rotating, watch the conveyor belt for food debris.
2. When the food debris reaches the front of the conveyor, rotate the power knob to the OFF position.
3. Unplug the equipment.
4. Let the equipment cool completely.
5. When the equipment is cool, use a brush or scrub pad to remove the food debris.
6. To clean the exterior, use a soft cloth dipped in hot soapy water to wipe the exterior and fan air intake under the equipment. If needed, wipe the fan intake area with degreaser to prevent long term build up.
7. Empty and clean the crumb tray(s).

PREVENTATIVE MAINTENANCE
Contact an authorized service agent for a professional cleaning of the components.

TROUBLESHOOTING

Problem| Might be Caused By| Course of Action
---|---|---
Toaster does not heat and the conveyor belt does not move.| Toaster is not plugged in.| Plug in the toaster.
Power knob setting is incorrect.| Rotate the power knob to the ON (|) position.
The wall breaker may be tripped.| 1.   Inspect for tripped breaker.

2.   Reset the breaker.

3.   If the breaker was not tripped, inspect the toasting chamber for broken heater elements.

4.   For broken elements, contact Vollrath Technical Services.

The reset may be tripped.| Look under the toaster to see if an object is preventing the fan blades from turning.

1.   Rotate the power knob to the OFF (O) position.

2.   Unplug the toaster.

3.   Wait 30 minutes for the toaster to cool.

4.   Remove the object.

5.   Plug in the toaster.

6.   Rotate the power knob to the ON (|) position.

7.   Press the reset button, located below the back panel. You should hear and feel the button reset. The toaster should start to operate.

8.   If the problem persists call Vollrath Technical Services.

Inspect the fan blades to see if they are dirty.

1.   Rotate the power knob to the OFF (O) position.

2.   Unplug the toaster.

3.   Wait 30 minutes for the toaster cool.

4.   Clean the fan blades.

5.   Plug in the toaster.

6.   Rotate the power knob to the ON (|) position.

7.   Press the reset button.

8.   If the problem persists call Vollrath Technical Services.

Toaster heats and the conveyor belt does not move.| There may be a problem with the motor/ speed control or drive chain.| Contact Vollrath Technical Services.
Top or bottom heat tubes do not heat.| One or more elements may have burned out.| Contact Vollrath Technical Services.

Toaster repeatedly overheats.

| The crumb tray may not be installed.| Verify the crumb tray is installed.
The fan may be dirty.| Verify the fan blades are clean. See instructions above for inspecting and cleaning the fan blades.
There may be a problem with the fan.| Contact Vollrath Technical Services.
The fan is not running.| There may be a problem with the fan.| Contact Vollrath Technical Services.

SERVICE AND REPAIR

When under warranty, repair is available for this product via carry-in service. To begin the process:

1. Contact Vollrath Technical Services at 1-800-309-2250. Please be ready with the item number, model number and serial number. You can find this information on the nameplate located on the side or back of the equipment. Also please provide a proof of purchase indicating the date the equipment was purchased.
2. A technical services representative will help you troubleshoot the problem over the phone.
3. If the representative determines the issue require professional service, he or she will help you locate an authorized service center.
4. Contact the authorized service center and transport the equipment to the authorized service center. Vollrath will cover the cost to repair and/or replace defective parts within the equipment warranty period. The cost of transporting the equipment to and from the service center is not covered by the warranty.

WARRANTY

WARRANTY STATEMENT FOR THE VOLLRATH CO. L.L.C.
The Vollrath Company LLC warrants the products it manufactures or distributes against defects in materials and workmanship as specifically described in our full warranty statement. In all cases, the warranty runs from the date of the end user’s original purchase date found on the receipt. Any damages from improper use, abuse, modification or damage resulting from improper packaging during return shipment for warranty repair will not be covered under warranty.
The warranty does not apply to products purchased for personal, family or household use, and The Vollrath Company LLC does not offer a written warranty to purchasers for such uses.

Heater Tubes: The warranty period is 1 year, including labor when performed at an authorized service center. Heater tube glass damage is not covered by this warranty. Customer is responsible for the cost of transporting the product to the authorized service center.
Warrantied Parts: The warranty period is 2 years parts, 1 year labor.
For complete warranty information, product registration and new product announcement, visit www.vollrath.com.

The Vollrath Company, L.L.C. Headquarters
1236 North 18th Street
Sheboygan, Wisconsin
53081-3201 USA
Main Tel: 800-624-2051 or 920-457-4851
Main Fax: 800-752-5620 or 920-459-6573
Canada Customer Service: 800-695-8560
Tech Services: techservicereps@vollrathco.com
www.vollrath.com

Pujadas
Ctra. de Castanyet,
132 P.O. Box 121
17430 Santa Coloma de Farners
(Girona) – Spain
Tel. +34 972 84 32 01
info@pujadas.es

Vollrath of China
Vollrath Shanghai Trading
Limited
23A, Time Square Plaza | 500
Zhang Yang Road
Pudong, Shanghai 200122
Tel: 86-21-50589580

Vollrath de Mexico S. de R.L. de C.V.
Periferico Sur No. 7980 Edificio 4-E
Col. Santa Maria Tequepexpan
45600 Tlaquepaque, Jalisco |
Mexico
Tel: (52) 333-133-6767
Tel: (52) 333-133-6769
Fax: (52) 333-133-6768

© 2018 The Vollrath Company L.L.C.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>