VOLLRATH BCO-7000 Premium and CanMaster Can Openers Blade Replacement Instruction Manual
- June 1, 2024
- VOLLRATH
Table of Contents
VOLLRATH BCO-7000 Premium and CanMaster Can Openers Blade Replacement
Specifications :
- Product Name: CanMasterTM EaziClean Premium and CanMaster
- Manufacturer: The Vollrath Company, L.L.C.
- Address: 1236 North 18th Street, Sheboygan, WI 53081-3201 U.S.A.
- Customer Service: 800.628.0830
Product Usage Instructions
Preparation:
Before replacing the blade, wash the new blade in warm soapy water and rinse thoroughly.
Blade Replacement:
- Remove the blade cartridge from the can opener.
- Loosen the screws using appropriate tools.
- Discard the old blade carefully.
- Insert the new blade into the designated slot.
- Tighten the screws securely to hold the blade in place.
- Re-insert the blade cartridge back into the can opener.
FAQ
- Q: Do I need any special tools for replacing the blade?
- A: Yes, you will need appropriate tools to loosen and tighten the screws during blade replacement.
- Q: How often should I replace the blade?
- A: It is recommended to replace the blade when you notice a decrease in cutting efficiency or if the blade shows signs of damage or wear.
Tools You Will Need
Flathead screwdriver for Premium and CanMaster.
- Wash the new blade in warm soapy water. Rinse thoroughly.
- Remove the blade cartridge.
- Loosen the screws. Remove the blade. EaziClean
The Vollrath Company, L.L.C.
- 1236 North 18th Street Sheboygan, WI 53081-3201 U.S.A.
- Main Tel : 800.624.2051 or 920.457.4851
- Main Fax : 800.752.5620 or 920.459.6573
- Customer Service : 800.628.0830
- Canada Customer Service: 800.695.8560
- www.vollrath.com
© 2017 The Vollrath Company L.L.C.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>