BLAUPUNKT Bluebot XBOOST Robot Vacuum Cleaner User Manual

: June 1, 2024
: Blaupunkt

BLAUPUNKT logo1

BLUEBOT XBOOST

USER MANUAL

Enjoy it.

Safety regulations

Before using this product, please read the following safety instructions and follow all routine safety precautions.
Please read the instructions carefully, please keep the instructions.
Any operation inconsistent with this instruction manual may cause damage to this product.

Note:

Only authorized technicians can disassemble this product. Users are not recommended to disassemble this product by themselves.
This product can only use the power adapter provided by the factory. If other adapters are used, the product maybe damaged.
Do not touch wires, sockets or power adapters when your hands are wet.
Do not use cloth curtains or body parts to roll into the product drive wheels.
Do not place this product near cigarette butts, lighters and other smoldering fires.
Please clean the product after charging.
Do not bend wires excessively or place heavy objects and sharp objects on the machine.
This product is an indoor household product. Do not use it outdoors.
Do not sit on the product.
Do not use this product (e.g. bathroom) in wet environment.
Before using this product, please remove all vulnerable items (e.g. glasses, lamps, etc.) on the ground as well as items (e.g. wires, pa per sheets, curtains) that may entangle the side brushes and air suction passages.
Do not put this product in a place where it is easy to fall (e.g. on desks and chairs).
Please carefully check whether the power adapter is connected to the socket before use, otherwise the battery may be damaged.
To prevent tripping, please inform other members of the house when this product works.
Please empty the dust box before using this product when the dust box is full.
The temperature used for this product is 0 to 40 degrees celsius.
Do not use this product in high temperature environment.
Please remove the battery from the machine before the product is scrapped.
Please make sure that this product is not powered on when removing the battery.
Please recycle the discarded batteries safely.

Warning:

Use only the original rechargeable battery and charging seat specially equipped by the manufacturer. Non – rechargeable batteries are strictly prohibited, please refer to “product parameters” for battery specification information.
It forbidden to use products in environments with open flames or fragile objects.
It is forbidden to use products in extremely hot (above 40 °C) or extremely cold (below 0 °C).
It is forbidden for human hair, clothes, fingers and other parts to approach the opening and operating parts of the product.
It is forbidden to use products on wet or stagnant ground.
It is forbidden for products to absorb any articles such as stones and waste paper that may dog products.
It is forbidden for products to absorb any inflammable substances, such as petrol, toner and toner for printers to photocopies. Prohibit the use of products in clean areas with flammable items.
It is forbidden for products to absorb any burning articles, such as cigarettes, matches, ashes and other articles that may cause fire.
It is forbidden to place articles at the suction opening. Do not use the product when the suction port is blocked. Clean up dust, cotton wool, hair, etc. at the suction opening to ensure smooth air circulation at the suction opening.
Use the power cord carefully to avoid damage. It is forbidden to use the power cord to drag or pull the product and the product charging seat. It is forbidden to use the power cord as a handle. It is forbidden to clamp the power cord in the crack of the door. It is forbidden to pull the power cord at sharp corners and corners. It is forbidden for the product to run on the power cord while the power cord should be far away from the heat source.
Do not use damaged charging seat.
Even if the product has been severely damaged, burning of the product is prohibited, which may lead to explosion of the battery of the product.

Product composition/ package contents

Robot Charging station Remote control(incl. battery x2)

Water tank Dust bin Mopping cloth

Cleaning brush Side brush pair x2 Adapter

Instruction manual Hepa filter Magnetic strip x1

Product composition / part name

Front Side Robot

Start/pause Button
Main Cover
Omnidirectional Lens
Dust Bin/Water Tank Button

Bottom Side Robot

Drop Sensor
Side Brush
Drive Wheel
Dust Bin
Charging Poles
Universal Wheel
Battery
Main Brush

Dust Container

High Efficiency Net Cover
Dust Bin Side Cover
Dust Bin/Water Tank Conductive Sheet
Dust Bin Metal Sheet
Primary Filter Strainer
High Efficiency Strainer

Water Tank and Mopping Cloth

Water Injection Port
Water Tank
Mopping Cloth

Charging Station

Signal Indicator
Dc Plug
Charging Dock Pins

Remote Control

Screen display
Mode switching
Direction button
Clock settings
Recharging
Time scheduling settings
Start/Pause
Auto cleaning mode

Product usage / preparation

Remove Protection
Before using the Robot, remove the protective strip on the Robot and remove the protective film on the charging station.

Direction Control

Product use / robot charging

1. Placing and charging: Place charging station against the wall and on a flat ground. Do not place items within the range of 0.5m left and right and 1.5m in front.

2. Connect the power supply.
3. Installing side brush: Install the side brush according to the left and right (L/R).

4. Charging: Place the robot on the charging station for charging. During charging, the indicator light flashes. When the charging is over, the light remains on. The charging time s about 5 hours.

During the cleaning process, the robot will automatically switch to “Recharging” mode when the battery is low and automatically finds the charging station to charge. You can also command the robot to switch to “Recharging” mode through the “Recharging” button on the remote control.

Charging attention:

The charging station cannot be used in environments with strong reflection such as direct sunlight and nearby mirrors.
If there s any object with strong reflection, please cover it 7 cm from the bottom.
In order to ensure that the Robot operates in full, please fully charge it before use. The charging time is about 5 hours.
When charging, do not attach the water tank to ensure the safety of charging and prevent wet rags from damaging the floor.

Product use / start cleaning

According to different cleaning needs, this product has a variety of cleaning mode to choose from. You can start various cleaning mode through a robot, remote control or App.

Auto cleaning
Applicable scenario: The most commonly used cleaning method is that the main engine uses a bow-shaped path to plan and clean the whole house according to the actual home environment.
Setting method: In the shutdown state, press and hold the start/pause button. When the indicator light of the robot s on, this indicates that the robot is powered on. When the button s pressed for a short time, or you use the automatic cleaning bottom ) on the remote control, the robot starts automatic cleaning.
To enter the robot super suction mode, press the one more time.

BLAUPUNKT Bluebot XBOOST Robot Vacuum Cleaner - d7

Single Room Cleaning
Applicable scenario: used to cleaning with the single room’ setting method: click the remote control switch button to select the single room cleaning’ mode and to start the single room cleaning.

Friendly reminder: When one single room is in need of cleaning, please close the door and the Robot will do centralized cleaning in the room. If this room does not have a charging station, the Robot will return to the starting point after cleaning. Single room cleaning mode s always in the super suction cleaning mode.

Edge Cleaning
Applicable scenario: For indoor corners cleaning, the robot cleans along the perimeter of fixed objects (such as walls), and returns to the charging station after the edge cleanings finished.

Setting method: Click the “Mode Switch” button on the remote control to select the Edge cleaning mode to start the edge cleaning.

Manual Control

Applicable scenario: Suitable for manual control cleaning.

Setting method: Click the ‘direction’ buttons on the remote control to control the robot to move forward, left, right or to turnaround 180°.

Product use / pause, start and shutdown

Pause: During the operation of the robot, press the robot start/pause button or “pause” button on the remote control to pause the operation of the robot.
Start: If the robot stops working for more than ten minutes, it will automatically switch to sleep mode (all the robot lights are off). You can wake up the robot by clicking the robot start/pause button first; then click the robot button again or any keys on the remote control and app to restart.
Shutdown: After the robot stops working, press the robot start/pause button for a long time. When the indicator light of the robot s off, it means the robot s shut down.

*Recommendation: after the robot finishes its work, do not shut down but keep it in charging state in order to perform better next time.

Product usage / time scheduling setting

Scheduling settings: Press the “Scheduling” button on remote control for a short time to set the robot time scheduling.
After you have set the time scheduling, the robot will automatically start cleaning at the scheduled time.

PS: Before scheduling setting, you need to set the robot time through timing setting button on the remote control.

Product use / water tank use

Do not use the floor mopping function on carpets.
After mopping the floor, please empty the water tank in time and remove the mopping cloth.

A. Add water

B. Install mopping Cloth

C. Install the Water Tank Assembly

D. Start mopping the floor

BLAUPUNKT Bluebot XBOOST Robot Vacuum Cleaner - e4

Component maintenance / dust container

A. Press the dust bin button to take out the dust bin

B. Open the dust box side cover

C. Empty dust container

D. Open the lid of the high efficiency filter

E. Take out the high-efficiency filter and the primary filter. Tap gently on the high-efficiency filter to remove dust.

! Attention: Do not clean the high-efficiency filter with water.

F. Rinse the primary filter screen

G. The dust container can be cleaned with a dry cloth.

! Attention: Do not wash the dust container with water

H. Air dry the dust container and filters; keep them dry to ensure its service life.
Recommendation: wash the primary filter with water after use of approx. 15 – 30 days.
The maximum service life of the high efficiency filter is 3 months.

I. Place the primary fitter and the high efficiency filter back info the dust container

Attention:

Before installing the filter, please ensure that the high efficiency filter and the primary filter are in a dry state.
Do not expose the high efficiency filter and primary filter to direct sunlight.

J. Close the dust container cover and install the dust container in the Robot.

Note: Do not allow water to seep into the fan port when cleaning.

Component maintenance / water tank and mopping cloth

A. Take out the water tank

B. Remove the mopping cloth

C. Empty the Water Tank

D. Rinse Cloth

E. Air dry

F. Dry or air dry the water tank

Component maintenance / main brush and side brush

A. Open the main brush cover

B. Take out the main brush shaft

C. Thread removal tool

D. Cleaning side brush

Component maintenance / charging dock pins, down view sensor, drive

wheel and universal wheel

Attention: The interior o the charging station pins, the down-view sensor and the bumper all contain sensitive Electronic components. Please use at all times a cry cloth when cleaning! Do not use any wet cloths in order to prevent damage caused by water inflow.

Clean charging station pins

Clean the down-view sensor

Clean drive wheels and universal wheel

If the product will not be used for a longtime, you need to fully charge it and turn it off before storing. The robot must be re-supplied with power every 3 months to maintain the life of the battery. If the battery is discharged or is not used for a longtime, the product may not be able to be charged. Please contact us for after-sales maintenance and do not disassemble it yourself.

Troubleshooting

No.

| Message| Cause| Solution
---|---|---|---

1

| Wheels off the ground| Robot suspended| Please put the robot back to the ground and press the cleaning key again.

2

| Dust bin not installed| Dust box removed and not installed| Please the dust container back into the robot and press cleaning button again.

3

| Battery failure| Abnormal battery charging| Contact after-sales for battery test.

4

| Please check if the wheel is stuck| Wheel jammed| Remove any possible objects which causes the jammed wheel.

5

| Please check if the front collision is stuck| Front impact bracket stuck| Check whether the front collision can rebound normally.

6

| Robot connection failed| Machine failed to connect to server| Check connectivity of the wireless network with the internet.

7

| The battery is low, please charge the machine| Battery power less than 20 %| The machine automatically enters to the recharge mode.

8

| Please check whether the side brush is tangled or jammed| Abnormal edge brushing| Remove any possible objects which causes the jammed side brush.

9

| Please move the machine to the open area.| The machine failed to get out of trouble.| Please move the robot to an empty place and press the cleaning button again.

Product Parameter

Classification

| Projects| Parameter
---|---|---

Structural class

| Diameter| 330 mm
Height| 76 mm
Net weight| 2.7 kg

Battery

| Voltage| 14.4 volts
Battery| 2500 mAh rechargeable lithium battery pack

Parameter

Robot

| Rated power (w)| 28
Operating voltage (v)| 14.4

*Due to the continuous improvement of the product, this information is subject to the physical object, We reserve the right to update the product at any time,

WARRANTY & RECYCLING

This product has 2 years warranty for manufacturing defects. The warranty period will be counted from the date of purchase of the product, according to purchase invoice. Product warranty only covers manufacturing defects, defects resulting from improper use are not covered in the warranty, such as (but not limited to) dropping the robot, improper transportation, connection to the mains power supply not in compliance with the voltage specified in this manual, insertion of foreign objects and natural wear of parts and parts Such as plastic parts (caps, buttons, handles, latch locks, power cables, etc) and metal parts (wires, motors, etc).

Also not covered are damages due to agents of nature, lightning, food, sea, oxidation, humidity etc). The product will lose its warranty if it presents defects, which after analysis by our technicians, are characterised s being improperly used, used for professional use or for the purpose for which it is not intended (according to the Owner’s Manual). This warranty will be void if it is found that the device has been tampered with, has been repaired by a person or service not authorised by Blaupunkt. The guarantee s only valid with the receipt/ invoice provided at purchase.

Blaupunkt undertakes to provide the above-mentioned services in the warranty period only in places where it maintains an authorised service. Consumers who are not located near an authorised service centre should be responsible for the costs and risks of transport to the authorised service of their choice.

Natural ‘wear and tear’ is not covered under warranty.

This product is for domestic use only.

THIS APPLIANCE AND ITS ACCESSORIES AND BATTERY ARE RECYCLABLE

DISPOSAL AND RECYCLING
This marking indicates that this product should not be disposed with other household wastes throughout the EU. To prevent possible harm to the environment or human health from uncontrolled waste disposal, recycle it responsibly to promote the sustainable reuse of material resources. To return your used device, please use the return and collection systems or contact the retailer where the product was purchased. They can take this product for environmental safe recycling.

Enjoy it.

blaupunktrobotics.eu/support-bluebot/
+31(0)88 566 7700
[email protected]

BLAUPUNKT logo1

Documents / Resources

| BLAUPUNKT Bluebot XBOOST Robot Vacuum Cleaner [pdf] User Manual
Bluebot XBOOST Robot Vacuum Cleaner, XBOOST Robot Vacuum Cleaner, Robot Vacuum Cleaner, Vacuum Cleaner, Cleaner
---|---