EDIFIER EDF280027 True Wireless Earbuds Instruction Manual
- June 1, 2024
- Edifier
Table of Contents
EDIFIER EDF280027 True Wireless Earbuds
Specifications:
- Model: EDF280027 True Wireless Earbuds with Active Noise Cancellation
- Input: 5V 200mA (Earbuds), 5V 1A (Charging case)
Product Usage Instructions
Power ON/OFF
Open or close the case to power the earbuds on or off.
First Pairing
- Power on the earbuds.
- Select “EDIFIER W260NC” in your device’s Bluetooth settings to connect.
Pairing For New Device
- With the earbuds on, press and hold the button on the case for about 3 seconds.
- Select “EDIFIER W260NC” in your new device’s Bluetooth settings to connect. Note: Earbuds will auto-connect to the last used device below.
Dual-Device Connection
- Pair device A with the earbuds without removing them.
- Re-enter Bluetooth pairing and select “EDIFIER W260NC” in device B settings to connect.
- Manually select “EDIFIER W260NC” in device A settings to connect.
Reset
- Place the earbuds in the case with it open.
Press the button on the case three times to perform a factory reset.
Charging
Follow the charging instructions provided:
- Charging Case Battery Level: When battery level is below 5%,charge for 2 seconds, when above 30%, charge for 2 seconds.
- Input: 5V 200mA (Earbuds), 5V 1A (Charging case). Note: Do not charge if there is moisture in the charging port.
Controls
Note: Default sound controls include High noise cancellation,Ambient sound, and Noise cancellation off. Images are for illustrative purposes only.
FAQ:
Q: Can I use the earbuds while they are charging?
A: It is not recommended to use the earbuds while they are charging as it
may affect the charging process and the overall performance of the earbuds.
W260NC
Model: EDF280027
True Wireless Earbuds with Active Noise Cancellation
Power ON/OFF
Open or close the case to power on/off.
First Pairing
Power on and then select “EDIFIER W260NC” in your device setting to connect.
Pairing For New Device
- In ON state, press and hold the button on the case for about 3s.
- Select “EDIFIER W260NC” in your device setting to connect.
Note: For subsequent use, the earbuds will automatically connect to the device used last time.
Dual-Device Connection
- Pair device A with the earbuds and don’t take the earbuds out.
- Re-enter Bluetooth pairing and select “EDIFIER W260NC” in device B setting to connect.
- Select “EDIFIER W260NC” in device A setting to connect manually.
Reset
- Place the earbuds in the case and keep it open.
- Press the button on the case 3 times to finish factory reset.
Charging
- Input: 5V 200mA(Earbuds) 5V 1A(Charging case)
Note: Please do not charge the earbuds when there is sweat or other liquids inside the charging port, which may damage the earbuds.
Controls
Note:
- Default sound control: High noise cancellation / Ambient sound /Noise cancellation off.
- Images are for illustrative purposes only and may differ from the actual product.
For more information, please visit our website:
@Edifierglobal
@Edifier_Global
@Edifier_Global
Model: EDF280027
Edifier International Limited
P.O. Box 6264
General Post Office
Hong Kong
2024 Edifier International Limited. All rights reserved.
Printed in China
NOTICE:
For the need of technical improvement and system upgrade, information contained herein may be subject to change from time to time without prior notice.
Products of EDIFIER will be customized for different applications. Pictures and illustrations shown on this manual may be slightly different from actual product. If any difference is found, the actual product prevails.