ELMAG 16017 KBM 32 S I-Vario V-Belt Column Drill Owner’s Manual
- June 1, 2024
- ELMAG
Table of Contents
ELMAG 16017 KBM 32 S I-Vario V-Belt Column Drill
Product Information
Specifications
- Drilling capacity in steel: Mandrel holding fixture (screw mandrel)
- Speed range: Variable
- Quill stroke: Gradually adjustable
- Column diameter : Standard size
- T-slot width: Standard width
- Drill table lift : Adjustable
- Mandrel radius: Standard size
- Drill table revolving : Yes
- Quill distance table min./max.: Adjustable
- Drilling table surface : Spacious
- Motor power: High performance
- Voltage: Standard
- Cubature base plate surface: Stable
- Height (total): 1 750 mm
- Weight: 230 kg
Product Usage Instructions
-
Safety Precautions
Before operating the V-Belt Column Drill, ensure you have read and understood the safety instructions provided in the manual. -
Setup and Installation
Place the drill on a stable surface with sufficient space around it for operation. Ensure all components are securely attached. -
Power Connection
Connect the drill to a suitable power source following the voltage requirements specified in the manual. -
Drilling Operations
Adjust the drilling depth using the clamp scale. Secure the workpiece and activate the drill using the appropriate controls. -
Maintenance
Regularly inspect the drill for any signs of wear or damage. Lubricate moving parts as recommended in the manual.
FAQ
-
Q: How do I change the drill chuck on the V-Belt Column Drill?
A: To change the drill chuck, follow the steps outlined in the operating instructions provided with the product. Typically, it involves using a chuck key to loosen the chuck and replace it with the desired one. -
Q: Can I use this drill for cutting threads in metal?
A: Yes, the integrated thread cutting device allows for cutting threads in metal either manually or by setting a pre-determined thread depth using the depth scale. -
Q: What should I do in case of an emergency during operation?
A: If an emergency arises, immediately press the emergency stop button to halt all operations and ensure safety.
V-BELT COLUMN DRILL MODEL KBM 32 S I-VARIO
- Article Number : 16017
- EAN Code : 9004853160172
TECHNICAL FACTS
- Integrated thread cutting device actuated by microswitch
- Drilling depth adjustment by means of a clamp scale
- LED work light
- Emergency stop button
PRODUCT HIGHLIGHTS
Super-Vario-Speed, the drive with more possibilities
The KBM I-Vario models are equipped with steplessly adjustable, powerful
drive systems. They allow the cutting speed to be precisely matched to the
material.
This protects the tool, which is particularly important when drilling holes in
heat-sensitive materials or when a high surface quality of the hole is
required.
Ideal machine for areas where the emphasis is on particularly clean and
technically precise manufacturing: precision engineering, tool and prototype
construction, plastics technology, acrylic glass processing, etc.
Highest quality with top value for money
The machines of the KBM I-Vario series are equipped with a Schneider frequency
converter as standard, which permanently monitors the drive motor and ensures
smooth running of the quill.
The integrated thread cutting device can be operated manually or by means of a
depth scale, which triggers the spindle reversal after a pre-set thread depth.
Standard configuration
- Keyless drill chuck B 16, 1 – 16 mm
- Taper mandrel MK 3 / B 16
- Drill drift
- Tool kit
- Operating instructions / CE
SPECIFICATIONS
drilling capacity in steel| 32 mm
mandrel holding fixture (screw mandrel)| MK 3
speed range| 10 – 2100 rpm
speed gradually| 2
quill stroke| 135 mm
column diameter| 98 mm
t-slot width| 14 mm
drill table lift| 770 mm
mandrel radius| 245 mm
drill table revolving| ± 360 °
quill distance table min./max.| 850 mm
drilling table surface| 410×380 mm
motor power| 1100 W
voltage| 400/50 V/Hz
cubature| 285x285x635 mm
base plate surface| 650×440 mm
height (total)| 1750 mm
---|---
Weight| 230 kg
11.04.2024 – 3/3
- COMPRESSED AIR TECHNOLOGY
- WELDING TECHNOLOGY
- METALWORKING
- STONE CUTTING TECHNOLOGY
- WORKSHOP TECHNOLOGY
- POWER GENERATORS