LUXPRO XP910 1000 Lumen Rechargeable Tactical LED Flashlight User Manual
- June 5, 2024
- LUXPRO
Table of Contents
LUX PRO XP910 1000 Lumen Rechargeable Tactical LED Flashlight
Features
- Rechargeable 18650 battery with charging cradle LPE Optics
- Tack Grip molded rubber grip
- Dial mode selector
- Soft-touch tactical tail cap
- O-ring sealed, IPX6
- 4 Modes: High/Medium/Ultra Low/Strobe
Operation Instructions
On/Off: Press and release button.
Cycle modes: Rotate mode dial to select any of 4 different modes (High/Medium
/Ultra-Low/Strobe). Dial can be rotated when light is on or off. The mode dial
is ben-official in pre-selecting a mode prior to entering certain environments
or activities. Momentary On: Partially depress the button to momentarily turn
on the flashlight.
Usage and Maintenance
Battery Information:
Included Lithium battery has a charge time of 3hr. Li-ion; 3.7V 2000mAh. 2x CR123 Li-ion cells can also be used with this product. Battery tube dimensions: 18.5mm (.728in)
Battery Replacement:
In a dry environment, unscrew the tailcup by turning counter-clockwise. Remove batteries. Insert new batteries into the tube (+) end first. Carefully reinstall the tailcup by pressing lightly while turning clockwise.
Battery charging:
Place LuxPro 18650 battery into the provided battery charging cradle, note the proper positioning with +/-. Plug Micro-USB cable into the cradle, and USB into 5V power source. LED light on cradle will show red when charging, and green at full charge.
Care Instructions:
If you know it’s going to be a while between uses, we suggest removing batteries from your light and storing your gear in a dry, protected place.
Product Warranty
Limited Lifetime Warranty against manufacturer’s defects. For warranty claims contact LuxPro by calling 801-553-8886 or sending an email to info@simpleproducts.com