AliExpress 2A84M-S5 Smart Watch User Manual
- June 1, 2024
- AliExpress
Table of Contents
AliExpress 2A84M-S5 Smart Watch
Product Information
Specifications
- Made in: China
- Features: BT calling, Heart rate monitoring, Blood oxygen sensor
- Components: Power Key, Microphone, Charging Port, Speaker, Air Pressure Hole
- Model: S5
Product Usage Instructions
Powering On/Off
- To turn on the device, press the Power Key. To power off, press and hold the Power Key until the device shuts down.
BT Calling
- Enable Bluetooth on your phone and pair it with the device to make and receive calls.
Heart Rate Monitoring:
- Place the device on your wrist and activate the Heart Rate & Blood Oxygen Sensor to monitor your heart rate.
Charging
- Connect the charging cable to the Charging Port of the device to recharge its battery.
Air Pressure Hole:
- The Air Pressure Hole helps in maintaining accurate readings.
- Ensure it is not blocked during usage.
Disclaimer
- Warning: The data provided by the device is for reference only and should not be used as medical data. For medical concerns, consult a professional doctor.
- RF Warning: The device meets general RF exposure requirements and can be used in portable conditions without restrictions.
Frequently Asked Questions (FAQ)
Q: Can I use this device for medical diagnosis?
- A: No, the data provided is for reference only and should not be used for medical diagnosis. Consult a healthcare professional for accurate medical data.
Q: How do I charge the device?
- A: Connect the charging cable to the Charging Port of the device and connect it to a power source to recharge the battery.
Q: What is the purpose of the Air Pressure Hole?
- A: The Air Pressure Hole assists in maintaining accurate readings by regulating air pressure around the device.
Watch Introduction
- Full screen touch: slide down to enter the status setting bar, slide up to view the notice, slide left to enter the main function interface, and slide right to enter the split screen menu;
- POWER key: wake up the screen/enter the function menu/return to the dial.
Charging Guide
- Before using the watch for the first time, it can be activated by charging. Use the equipped magnetic charger to attach it to the metal contact on the back of the watch.
- Connect the other end of the charging line to the 5V1A USB charging head or the computer USB interface.
App-Download
- Download and install through the Google Play Store.
- Download and install through AppStore.
- Download and install by scanning the QR code.
Binding device
- Binding devices with Android phones Open the FitCloudPro application, enter the device page, and click Bind Device.
- Click the device with Bluetooth name S5 on the search device page to bind.
- You need to agree to the following permissions to use the Bluetooth call function.
- When this pop-up window is displayed on the App page, you need to click Agree on the watch to complete the device binding.
- Binding devices with iOS mobile phones Use an iOS mobile phone to bind devices Open the FitCloudPro application, enter the device page, and click bind device.
- Click the device with Bluetooth name S5 on the search device page to bind.
- When this pop-up window is displayed on the App page, you need to click Agree on the watch to complete the device binding.
- You need to agree to the following permissions to make the watch function work normally and the Bluetooth call function.
Audio setup
Open the watch’s Bluetooth call function and play the mobile media audio function.
Dial setting
- Dial switch: press and hold for 2s in the dial interface to switch the dial, and slide left and right to switch the dial.
- Dial push: you can select your favorite dial in the app dial push and download it to the watch.
Function Introduction
Daily data
- Support daily calories, steps, distance data, and target records.
- It supports recording the total steps in 24 hours and the walking steps in each period. Support to view the history of steps in the past seven days.
Sleep
- Support daily light sleep and deep sleep records.
- Support to view sleep history of nearly seven days.
Heart rate monitoring
- Before heart rate monitoring, first, make sure that the watch is correctly worn on the wrist (the best position is at a finger width above the wrist bone).
- Heart rate detection requires that the watch be worn tightly to avoid light leakage and cannot be effectively detected. Then enter the heart rate detection.
- During the detection process, the wrist is required to remain stationary. When entering the heart rate measurement interface, the bottom green light lights up to start the measurement. When the measurement is completed, there will be a vibration reminder.
- Support measuring current heart rate data
- Support 24-hour detection
- Support heart rate interval keeping duration record
Sport mode
- The watch supports 8 built-in sports nodes+100+sports modes pushed by the App.
Blood oxygen monitoring
- Before blood oxygen monitoring, first, make sure that the watch is correctly worn on the wrist (the best position is at a finger width above the wrist bone).
- Blood oxygen detection requires that the watch be worn tightly to avoid light leakage and unable to detect effectively.
- Then enter the blood oxygen detection. During the detection process, the wrist is required to remain stationary. When entering the blood oxygen measurement interface.
- The bottom green light will light up to start measuring for 30-60 seconds, and there will be a vibration reminder when the measurement is completed, The measurement is based on PPG technology;
- Support to measure the current blood oxygen data
- Support to view the blood oxygen history data for the last seven times
Weather
- After the watch is connected to the APP, this weather interface will display the real-time weather temperature and weather type.
- Support to view the weather data of the day.
Music control
- After the watch is connected to the APP, you can control the pause and start of the mobile music player, volume adjustment, and song switching:
- When the phone plays music, you can use the watch control phone to play/pause, the previous song, and the next song.
Other functions
Bluetooth calls common contacts, call records, voice assistant, sports records, women’s health, blood pressure monitoring, breathing training, stopwatch, timer, alarm clock, message push, calendar, rest screen display, and other functions.
FAQ
Why is there a reminder on QQ, WeChat and other information, but not on the bracelet?
Confirm whether the messages can be displayed normally in the mobile notification bar. The device pushes messages by reading the messages in the mobile notification bar lf there is no message in the mobile notification bar, the device cannot receive the push. You need to find the notification and status bar in the mobile phone settings and turn on the phone, SMS, etc. 1.2 Open the APP and enter the APP device bar - click the message reminder and open the corresponding application switch button to receive the message push. The Bluetooth connection between the device and the mobile phone is always maintained.
How can the device be unbound from the phone?
Android phone On the Device page of the APP, click the Unbind button and select OK to unbind. iPhone On the My Device Information
Why are Android phones easy to disconnect?
The APP must be running in the background so that Bluetooth will not automatically disconnect, but the Android mobile phone system memory management will force the APP to close. We need to manually turn off the power saving mode of the mobile phone system or add the APP to the green background of system management so that the APP will not be forced to close
Warning: The data is for reference. only and cannot be used as medical data. If you need more help, please contact a professional doctor.
FCC Statement
This equipment complies with Part 15 of the CC Rules. Operation Is subject to the following two conditions:
- This device may not cause harmful interference,
- This device must accept any interference received, including interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class B digital device, under part 15 of the FCA rules. These limits are designed to provide reasonable protection against harmful ten radiate raid frequency later aid, it is ged and used in. accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and the receiver.
- Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
To assure continued compliance, any changes or modifications not expressly
approved by the party.
Responsible for compliance could void the user’s authority to operate this
equipment. (Example- use only shielded interface cables when connecting to
computer or peripheral devices.
RF warning statement:
The device has been evaluated to meet the general RF exposure requirement
The device can be used in portable exposure conditions without restriction.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>