AliExpress QLS-180S Can Impulse Sealer Machine Instruction Manual

August 22, 2024
AliExpress

AliExpress QLS-180S Can Impulse Sealer Machine

Product Overview

  1. The can seamer has many advantages, such as advanced structure, exquisite appearance, reliable performance, and simple operation. In line with national food machinery standards and electrical safety standards, it is widely used in high-end bars, coffee shops, and cold drinks shops.
  2. Please read this manual carefully before using, and carrying out the installation, adjustment, and operation of the machine according to the requirements of this specification.

Important

  1. Please read this manual carefully before using this product, and retain the instructions for future reference.
  2. Do not immerse in water or other liquid, nor 4rinse by dragon water directly.

Warning

  1. Before connecting the power, please check whether the power supply voltage is equal to the supply voltage marked on the product or not.
  2. This product is not intended for use by those persons (including children) with Deterioration of body function or mental ability, or lack of experience and knowledge. They need someone to supervise, or to instruct the operation before use.
  3. When the machine is running, do not close, it to avoid danger.

Security and maintenance

  1. The voltage could be 110V or 220V, Please adjust the Shrapnel to the appropriate location before using it.
  2. This product with the plug wire has three core wires, one of which is the ground wire, so please make sure the socket has ground wire to avoid electric shock.

Component of Easy-to-open Can Sealer

Operation Introduction

Press the startup key to work,  and press the emergency stop key to stop working.

Operation Introduction

  1. The adjustment of cup height and lifting shaft
    • When the machine is unplugged, cover the cup with the aluminum cover put it on the cup holder, and move the pull rod forward if the aluminum cover and the pressure cup shaft are tightly fitted, then the height of the lifting shaft is just right.
    • If there is a gap between the aluminum cover and the press cup shaft, then we need to adjust the height of the lifting shaft. Firstly, loosen the nut on the lifting shaft. Secondly, rotate the lifting shaft by hand (rise counterclockwise) until the aluminum cover fits the pressure cup shaft tightly. Finally, tighten the nuts.
    • If the pull rod is not in place, it is very tight, then the lifting shaft should be lowered.
  2. Firstly, loosen the nut on the lifting shaft. Secondly, rotate the lifting shaft by hand (descend clockwise) until the aluminum cover fits the pressure cup shaft tightly. Finally, tighten the nuts.

When the light switch is on, the light will be on while the machine is working.
Warning: If the aluminum cover does not fit the pressure cup shaft tightly, it will not seal tightly.

  1.  Put through the power, turn on the switch on the machine socket, and then turn on the power switch on the operating board of the machine.
  2. Place the cup to be sealed on the cup holder, pull the pull rod to the position, and then press the start button, the machine will automatically stop after sealing the can.
  3. Pull down the pull rod to take the cup out before the next can sealing operation. The blue light comes on when you seal the can.
    Note
    When the power is suddenly cut off or the power is turned off during the sealing process, the machine will continue to work when you power it up again.

Notes

  1. Do not put your hand between the edge sealing wheel and the pressure cup shaft when the machine is working, so as not to pinch your hand.
  2. it is forbidden for users to disassemble the relevant solid parts if you need to disassemble some parts of the machine, please contact our after-sales personnel or ask the dealer for guidance.
  3. Clean the machine regularly to prevent it from corroding the moving parts of the machine and causing it to unsmooth.

The ways of cleaning

  1. When cleaning, please turn off the power and pull the plug.
  2. After use, please clean and wipe the body immediately.

Product Warranty

This product has a one-year free warranty from the date of sale.

Can sealing machine Warranty Card

Product Code
Please fill out the warranty card and affix the dealer’s seal, otherwise the the warranty card is invalid.

  1. This product warranty is for six months. During the warranty period, and under normal use, our company will be responsible for giving free maintenance.
  2. Free maintenance won’t be given under the following circumstances.
  3. The damage was caused by the customer’s inappropriate usage and maintenance.
  4. The damage caused by the dismantling of a non-our-company authorized maintainer.
  5. The damage caused by force majeure.
  6. Out of warranty period.

Fault Analysis and Treatment

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals